Now console gamers can share with YouTube too

Subject: Systems | February 12, 2013 - 02:57 PM |
Tagged: htpc, Hauppauge, HD PVR 2 Gaming Edition

Now that capturing PC gaming is so easy to do, through either software or hardware, game walkthroughs and trick videos are commonplace on YouTube but the console gamers have not had that ability until recently.  XSReviews recently took a look at the Hauppage HD PVR 2 Gaming Edition which is a device that sits on an HDMI connection between your console or PC and your display and is capable of either passing through or recording a 1080p signal.  Unfortunately their testing did not go smoothly and even after updating the software they had issues recording or even playing at 1080p, however at 720p the device worked as advertised.  If you are needing to record at full resolution you might want to wait for another patch as you might run into some of the same issues.

XSR_10-front.jpg

"On PC, it’s pretty easy to record footage of your games. Whether you’re using streaming software like XSplit or recording directly to your hard drive with Fraps, getting your gameplay out there is fairly well understood.

For consoles, it’s much harder – with a locked down environment devoid of third party applications, you can’t just download a program off the ‘net and start recording. Instead, you’ll need some physical hardware to do the job.

Enter the Hauppage HD PVR 2 Gaming Edition. This small cuboid is designed to make recording and even streaming your gameplay incredibly simple – just hook up a few wires and, if the back of the box is to be believed, you’ll be away.

In this review, we’ll put that to the test as we enter the exciting world of console recording and streaming!"

Here are some more Systems articles from around the web:

Systems

Source: XSReviews

Hauppauge Launches HD PVR 2 With HDMI and TV STB Capture

Subject: General Tech | January 10, 2013 - 05:53 PM |
Tagged: video recorder, tv pvr, hd pvr 2, Hauppauge

Hauppauge recently introduced a new HD PVR 2 TV recording and video capture box. The HD PVR 2 Model 1512 will record analog component or unprotected HDMI inputs. Videos are stored on a USB-connected computer in H.264 files with resolutions up to 1080p and up to 30 frames per second.

Hauppauge HD PVR 2 Model 1512.jpg

The video recorder features a DC power jack, USB port, HMDI and S/PDIF input, and HDMI output on the rear of the box. It also features a component input port (breakout cable) and a connector for the included IR blaster. The IR blaster along with Hauppauge’s WinTV v7.2 software allows the HD PVR2 Model 1512 to change the TV set top box channel at predetermined times to record TV shows via the HD PVR2’s component input. Users can alternatively use Microsoft’s included Windows Media Center software to record TV.

The personal video recorder is slated for an official release in North America and Europe on February 1, 2013. Pricing on the box has not yet been released.

Source: Hauppauge

Capture any streamed media with the help of Hauppauge

Subject: Systems | January 5, 2012 - 02:23 PM |
Tagged: htpc, Hauppauge, colossus, streaming, capture

Missing Remote have assembled an impressive guide on how to use a Hauppauge Colossus to capture any media you can stream to your HTPC.  Hulu, YouTube, Netflix or anything else, this guide will show you how to capture streaming media so you can watch it again at your leisure.  Apart from the hardware you will need Arcsoft ShowBiz and likely an RDP hack which they provide for you to use.  Read on to see the trick as well as their recommended audio and video capture settings as well as tips on playback.

MR_HuluHookup.JPG

"So we've all probably experienced the case where, for some reason, our DVR misses an episode and we have to find it via another mechanism. Sure, you can watch it on Hulu or Amazon VOD, but you want to add it to your collection without the DRM (exactly how the DVR would have done), and it came over the air/cable for free (or you paid your cable bill) - so why should you have to pay for it again?! Maybe you've had one too many nasty-grams from Comcast about your bit-torrent downloads so you don't want to go that route."

Here are some more Systems articles from around the web:

HTPC

 

Hauppauge's new inexpensive external dual TV tuner

Subject: Systems | August 25, 2011 - 01:17 PM |
Tagged: htpc, cable card, tv tuner, external tv tuner, dual tv tuner, Hauppauge, WinTV-DCR-2650

The Hauppauge WinTV-DCR-2650 is an external box which has two seperate TV tuners which connects to your PC over USB.  With a CableCARD you will be able to connect directly to your cable hook up, and ClearQAM can be received without one as Missing Remote proved in their preview.  At only $149 it even sounds a better deal than many of the PVR devices cable companies hawk to their subscribers.  Keep an eye out for them to finish the review once their CableCARD arrives.

MR_Hauppaugedctfront.png

"Getting our hands on a new product is always exciting so we thought we would share it with you! We've been anxiously awaiting the Hauppauge WinTV-DCR-2650 ever since we first saw the prototype of the CableCARD product at CES. If you haven't heard by now, the WinTV-DCR-2650 is a dual-cable tuner that connects to a PC via USB--a great option for small form factors or a situation where there's no free PCIe slot available. It also happens to be the most inexpensive way to gain access to the entire subscription package from a cable provider on a PC with a retail price of $149. Enough about what it is, let's take a look at it after the break!"

Here are some more Systems articles from around the web:

HTPC