Gigabyte's high powered A75M-UD2H for the low powered Llano processor

Subject: Motherboards | July 11, 2011 - 05:18 PM |
Tagged: llano, gigabyte, a75, fm1

Gigabyte made sure that a Llano user will be able to get all that they want out of the  A75M-UD2H; 8+2 phase power, five SATA II I ports and an eSATA on the backplate to keep the combo PS/2 port, D-sub port, DVI-D port, HDMI port, DisplayPort, optical SPDIF connector, two USB 2.0, four USB 3.0 port, one FireWire port, the Gigabit Ethernet port, and 8 channel audio ports.  As you can tell that backplate is very full. It also supports Crossfire with a pair of PCIe slots running 8x when both are populated. Taking the board through its paces was only one facet of Bjorn3D's review, they also pair the board and APU with an HD6870 to see how it performs with a powerful GPU.  Check out the review.

b3d_gigabytea75-ud4h.jpg

"When we looked at Llano, we determined that its CPU performance is similar to Athlon II X4 or Phenom II X4 840 processor, so why would a discrete GPU user choose Llano instead of an Athlon II X4 or Phenom II X4? Should the user choose a more expensive CPU for gaming? Firstly, Llano is more power efficient and runs much cooler than the 45nm processors. We'll be testing the second question today.

In this review, we are not only going to take a look at the GIGABYTE board, but we are also going pair the board with an HD 6870 and run a few games at 1920x1080 resolution with typical settings that average gamers would use to see the impact of CPU performance in games"

Here are some more Motherboard articles from around the web:

Motherboards

Source: Bjorn3D

The difference a letter can make; 4 LGA1155 boards from Gigabyte

Subject: Motherboards | July 6, 2011 - 06:27 PM |
Tagged: gigabyte, sandybridge, ga-z68x, lga1155

Gigabyte's GA-Z68X-UD3P-B3, GA-Z68X-UD4-B3, GA-Z68X-UD5-B3 and GA-Z68X-UD7-B3 are up for review on X-bit Labs right now.   You need to be fairly observant to notice the difference in the models and have a great memory to know which is which at a glance.  They all share some similar characteristics, such as the lack of onboard video out but also share positive traits like Dual BIOS and Phase LEDs and a number of USB 3.0 and SATA 6G ports.  They had a few problems during the review which you might want to find out about before purchasing one of these boards.

xbt_giga1155.jpg

"Gigabyte GA-Z68X-UD3P-B3, GA-Z68X-UD4-B3, GA-Z68X-UD5-B3 and GA-Z68X-UD7-B3 mainboards do not have video Outs, that is why integrated graphics doesn’t work on them. They can use Intel Smart Response technology, but do not support any of the Lucid Virtu modes. Read our in-depth review to find out about other features of these mainboards."

Here are some more Motherboard articles from around the web:

Motherboards

Source: X-Bit Labs

Gigabyte Launches New Super4 Motherboards Based On Intel's H61 Chipset

Subject: Motherboards | June 10, 2011 - 04:07 AM |
Tagged: sandybridge, lga1155, Intel, h61, gigabyte

Gigabyte is on a roll lately as far as cranking out new motherboard series, and their latest unveiling introduces a new lineup that the company has dubbed its “Super4” motherboard series. The new motherboards amount to a budget Sandy Bridge platform that is positioned to save budget PC gamers a few bucks compared to the more feature-full, and more expensive, P67 and H67 chipsets by cutting out features that they do not necessarily need.

The GA-H61M-USB3-B3 Model Is Part of the New Super4 Series.

To be more specific, the new Super4 series is a new line of Gigabyte motherboards based around Intel’s H61 Express chipset, and supporting Intel’s latest Sandy Bridge socket 1155 processors. This chipset is fairly similar to it’s higher-end H67 brethren; however, it features only a single PCIe 2.0 x16 slot, 10 USB 2.0 ports, and four SATA II (3.0 Gb/s) ports versus the two PCIe 2.0 x16 slots, 14 USB 2.0 ports and six Sata II ports of H67. (A full comparison by Intel of the two chipsets can be found here.  Another differentiator between the two chipsets is the number of RAM DIMM slots available.  Whereas H67 boards could support four DIMM slots, H61 boards will only include two slots.

Gigabyte has then further added USB 3.0 support to their specific motherboards by including two USB 3.0 ports on the rear IO panel powered by an Etron EJ168 chip. Realtek Audio and Gigabit Ethernet is also included and accessible via the rear IO. As far as expansion slots, on the GA-H61M-USB3-B3 for example, Gigabyte has laid out the expansion slots as follows: One PCIe 2.0 x16 (running at x16) slot, one PCIe x1 slot, and two PCI slots. As the motherboards are based on Intel’s “H” chipset variant, their are the traditional DVI-D and VGA video outputs for the Intel processor graphics.

The new Super4 motherboard roll-out currently includes the following models: GA-P61-USB3-B3, GA-P61-DS3-B3, GA-HA65M-D2H-B3, GA-H61M-USB3-B3, GA-H61M-D2-B3, and GA-H61M-S2V-B3.

Gigabyte’s marketing team has appeared in full force, presenting the new Super4 series as “Super Safe, Super Speed, Super Savings, and Super Sound,” where the four pillars make up the motherboards “Super4” moniker.  The boards will likely retail for under $100 USD and will be priced lower than P67 and H67 based boards due to the fewer ports and supported PCIe x16 slots reducing the manufacturing cost. For single graphics card gaming rigs with only one or two storage drives, the new H61 motherboards may well prove to be a viable option. You can learn more about the boards by perusing the press release as well as by staying tuned to PC Perspective.

Source: Gigabyte

Gigabyte makes some interesting choices with the GA-Z68X-UD4-B3

Subject: Motherboards | June 7, 2011 - 01:12 PM |
Tagged: z68, gigabyte, GA-Z68X-UD4-B3

The GA-Z68X-UD4-B3 does not have any video out connectors, a choice which seems very strange for a Z68 based motherboard since it removes the GPU switching ability which is so popular with the new high end SandyBridge board.  Theoretically that should reduce the price of the board, though Gigabyte instead chose to pack it with other extras, a wide variety of output ports on the back panel, the new Touch BIOS and even an ability to switch between two separate 8 phase power planes.  See if the trade offs make sense to you by reading iXBT Labs' full review.

ixbt_ud4b3i68z.jpg

"If the lack of support for integrated graphics doesn't bother you, Gigabyte GA-Z68X-UD4-B3 is a good and promising choice. It stands out among typical mid-end solutions by having richer functionality (two USB 3.0 and two additional SATA 6Gbps controllers), comes with a lot of software utilities, and you don't have to pay for extra hardware features you might not need. Also, the Touch BIOS adds nice variety to all those implementations of UEFI."

Here are some more Motherboard articles from around the web:

Motherboards

Source: iXBT Labs

Gigabyte X58A-OC Motherboard offers tons of features, removes others

Subject: Motherboards, Shows and Expos | June 2, 2011 - 05:13 AM |
Tagged: X58, overclocking, gigabyte, computex

Releasing a motherboard based on the X58 chipset at this point might seem odd, but when you can offer a unique take on the overclocking market you might just find a niche.  Gigabyte is hoping that is the case with the new X58A-OC model that is going to be priced very competively thanks in large part to the removal of many features.

gb07.jpg

The orange and black color scheme on the board is actually pretty unique while the layout is setup in a way for quad-GPUs - you are going to need that to break those overclocking records. 

gb08.jpg

In the top right hand corner there are a host of overclocking specific features.  The "4G" button will automatically overclock basically any Nehalem processor to something above 4.0 GHz while the Gear button will decrease the size of the increments available to the user on voltage to the processor.  The ratio and frequency +/- buttons are going to be of great use for overclocking a system on the fly without having to go through the trouble of entering a BIOS.  Don't forget you have your power and reset buttons and voltage monitoring leads here too.

gb09.jpg

Where Gigabyte saves a bit of money is with the non-overclocking features; things like eSATA and high-end audio are left out so that the even the classic external connection space is pretty bare. 

gb10.jpg

You will also notice near the SATA data connections some SATA-style power connectors as well.  These are used to supply extra voltage to the PCI Express connections for overclocking and pushing quad graphics cards.  

Computex 2011 Coverage brought to you by MSI Computer and Antec

Source: Gigabyte

New Gigabyte Motherboards: Llano, iSSD and Socket 2011 Models

Subject: Motherboards, Shows and Expos | June 2, 2011 - 04:52 AM |
Tagged: ssd, socket 2011, llano, intel ssd, gigabyte, computex, APU

We stopped by the Gigaybte booth during Computex 2011 this week and found a host of new motherboards that range from the mainstream to the ultra-extreme. 

gb01.jpg

First up is the A75-UD4H that supports the new AMD FM1 socket and the upcoming AMD Llano processor.  Even though the APU will have integrated graphics on die, the Gigabyte board support AMD Dual Graphics technology and CrossFire multi-GPU solutions in conjunction with 8 USB 3.0 ports. 

gb02.jpg

The board will include output connections of VGA, DVI, HDMI and DisplayPort along with size USB ports, four of which are USB 3.0. 

gb03.jpg

The Z68XP-UD3 motherboard is one that will be offered in two different ways: one with an SSD and one without.  The "iSSD" model will actually include an mSATA Intel 20GB SLC SSD and should come in at a cost of under $250.  Considering the Larson Creek drive will cost you anywhere from $90-110 on its own, the combination of a Z68 motherboard and SSD is actually very price competitive.  Plus, you get the convenience of having the SSD on the motherboard without it taking up a 3.5-in or 2.5-in drive bay.

gb04.jpg

For those that choose to get the lower cost board without the included Intel SSD you will be able to choose from several other newcomers to the mSATA form factor including Kingston and OCZ.

gb05.jpg

Of course we had to take a look at the Socket 2011 motherboard, the X79A-UD3 with support for the upcoming Intel Sandy Bridge-E processor.  According to the slide information this will include a new version of the SSD caching technology called RSTe (Rapid Storage Technology Enterprise) with support for USB 3.0 and quad-channel DDR3 memory.

gb06.jpg

For those that haven't seen, here is a close up of the Socket 2011 in all its glory - that's a lot of pins!!

Computex 2011 Coverage brought to you by MSI Computer and Antec

Source: Gigabyte

Gigabyte Offers Z68 Motherboard With Bundled Intel 311 mSATA SSD

Subject: Motherboards | May 27, 2011 - 10:25 AM |
Tagged: z68, intel 311, gigabyte

Gigabyte has been on the ball as far as new Intel based Z68 motherboard launches go, and today is no different as they announce a new motherboard that will ship with an included Intel 311 mSATA SSD that is ready to power Intel's Smart Response Technology.

Gigabyte_Plus_Intel311.jpg

The new motherboard has been dubbed the Gigabyte Z68XP-UD3-iSSD, and is a Z68 based affair with an included 20GB SLC caching-ready solid state drive. Richard Chen, the VP of Worldwide Sales and Marketing for the motherboard manufacturer was especially enthusiastic about the launch, stating that "our customers realize the performance benefits that Intel Smart Response Technology has to offer, and the Z68XP-UD3-iSSD is the easiest way for them to instantly take advantage of the performance boost."

The bundle in question will be available from “selected online retailers” worldwide stating in early June of this year. Unfortunately, there is no word on pricing for the motherboard plus SSD; however, if priced right it will no doubt be a boon to first time builders in making their DIY rig that much easier to assemble.

Source: Gigabyte

Gigabyte Launches World's First Z68 Motherboards With Support for mSATA Intel SLC SSDs and Smart Response Tech

Subject: General Tech, Motherboards | May 11, 2011 - 05:23 PM |
Tagged: z68, srt, motherboard, gigabyte

Popular enthusiast motherboard maker Gigabyte has today announced 4 additional motherboards to their already expansive Z68 chipset based lineup at launch.

4277.jpg

In addition to the features discussed in the previous announcement, including Lucid Virtu technology, the four new models feature a mSATA connection for onboard Intel SLC SSDs such as the new Intel 311 20GB SLC SSD. The 20GB drive can be used in conjunction with the Intel Smart Response Technology to boost system performance.

While Intel's SRT technology is also included in the other Gigabyte Z68 Motherboards, these 4 specific models differ in the implementation. Specifically, they allow consumers to attach the small solid state drive directly onto the motherboard. This will free the standard SATA ports of a SRT SSD for another hard drive or optical drive.

news10.jpg

Gigabyte has found as much as a 471% improvement in PC Mark Vantage scores in using a 20GB Intel 311 SLC SSD and a SATA 2 hard drive versus solely a SATA 2 hard drive. PC Perspective also examined Intel's Smart Response Technology and found that in trace based testing, the SLC SSD greatly improved performance once the data had been cached to the SSD. As for improvements in boot performance, PC Perspective found that:

"Boot times were just 3 seconds shy of those achieved with the OS cached on the SSD entirely. Of significant note here is that the SSD 310 was able to edge out (0.5 secs) faster boot times than the SSD 320 *and* the SSD 510, which we tossed in for an additional point of comparison."

Intel's SRT technology can definitely improve performance in the right situations, and Gigabyte is offering even more options to implement it in their newly announced models; the Z68XP-UD3, Z68XP-D3, Z68AP-D3, and Z68P-DS3. The new models are due to be released in June 2011.

Source: Gigabyte

Gigabyte Z68MX-UD2H-B3 Motherboard Pictured

Subject: Motherboards, Chipsets | May 9, 2011 - 09:11 AM |
Tagged: gigabyte, z68

The slueths over at VR-Zone have come across some photos of the upcoming Gigabyte Z68 motherboard option, the Z68MX-UD2H-B3.  The VRM setup is a 6+1 design which is pretty basic though the inclusion of three full-size PCI Express slots should allow for at least dual-card configurations of SLI and CrossFire and possibly even three cards.  

gbyte_z68.jpg

VR-Zone has more info on the configuration options as well:

Moving on we have a header for two front USB 3.0 ports via an Etron host controller, no less than five headers for 10 USB 2.0 ports, seven SATA ports of which three are SATA 3Gbps and four are SATA 6Gbps and for some reason a serial port header.

Around the back we have four USB 2.0 ports, another two USB 3.0 ports using another Etron controller, an eSATA port, a Gigabit Ethernet port, a PS/2 port, 7.1-channel audio with optical S/PDIF out and a set of four display ports consisting of a D-Sub, DVI, HDMI and DisplayPort.

For those of you that love the mATX form factor seeing reasonable designs like this one are good indicators that the Z68 market is going to have just many options as the P67 one did.

Source: VR-Zone

Gigabyte Partners With Lucidlogix To Bring Switchable Graphics To Desktop Enthusiasts

Subject: Motherboards | May 6, 2011 - 10:18 AM |
Tagged: z68, switchable desktop graphics, Lucidlogix, gigabyte

Gigabyte, maker of quality motherboards that are recommended by many enthusiasts for DIY builds, has today announced a long term partnership with Lucidlogix to bring switchable graphics to its Z68 desktop chip set based motherboards.

While notebook users have enjoyed switchable graphics technology like Nvidia's Optimus and AMD's Switchable Graphics for some time, desktop users have not had a widely available solution. DIY (do it yourself) builds have been even further from a workable solution. Today; however, Gigabyte has stepped up to the plate to offer OEMs and enthusiast builders the opportunity to use switchable graphics by using the Lucidlogix Virtu technology.

news1.jpg

So far, Gigabyte has announced three motherboard models that will ship with Lucidlogix’s Virtu technology; the Z68X-UD3H-B3, Z68A-D3H-B3, Z68MX-UD2H-B3, and Z68MA-D2H-B3 specifically. These motherboards support both Virtu and Intel’s LGA 1155 “Sandy Bridge” processors, which include an integrated GPU that Intel dubs “processor graphics.”

While these Intel processor graphics’ gaming capabilities are extremely limited, they do very well running Windows 7’s Aero desktop while sipping power. Dedicated graphics cards on the other hand, tend to draw relatively large amounts of power even at idle. Until now, enthusiasts have had to choose between low power machines that are unable to run the latest games or gaming machines that remain power hungry in everyday non-gaming usage.

What Ludiclogix’s Virtu technology promises for Gigabyte customers is the best of both worlds. By allowing enthusiasts to use both a powerful dedicated graphics card for gaming and a low power card for everyday use, better control, efficiency, and choices become available.

virtu-diagram.png

The way in which this switchable graphics technology works is that Lucidlogix presents a sort of virtualized graphics card to the operating system. There is then a bit of logic that determines which graphics card will process the various Direct X API calls. When only using the Aero desktop and IntelMedia processor graphics instructions, the dedicated card can be in a low power state while the integrated GPU handles the workload. When running games or when activated by a user (or their profile settings), the virtualized card passed the dedicated card instructions to process that are then routed out the Sandy Bridge video output connection. This allows enthusiasts the best of both power draw and performance worlds that mobile users have enjoyed for some time.

Another important benefit of the Virtu technology is that it will allow enthusiasts to use programs that benefit from Intel's Quick Sync technology.  Programs optimized with Intel Quick Sync in mind use fixed function transistors in the processor graphics of Sandy Bridge CPUs to hardware accelerate such task as video transcoding.  GPU accelerated software such as this is able to generate higher quality encodes at a faster frame rate (using Intel's Quick Sync) than both current Nvidia and AMD graphics cards.  According to Anandtech, when converting The Dark Night from a 12mbps 1080p x264 source video to a 1.5mbps 480p video optimized for the Ipod Touch, the Sandy Bridge's GPU was able to achieve 264.8 frames per second, which results in Quick Sync being "almost 4x faster than the Radeon HD 6970 and twice as fast as everything else."  PC Perspective also found marked improvements in transcoding time using Quick Sync to convert a 450mb Cannon 7D's video file to an ipad optimized format.  In PC Perspective's testing, they saw a 5.2x faster transcode time using Quick Sync versus without (no gpu acceleration). Until now enthusiasts with high end graphics were unable to use the graphics processor in Sandy Bridge CPUs as it automatically disables itself when it detects that a discrete graphics card is present in the system. 

The only drawback for high end gamers lies in issues with setting up multi-monitor rigs as the Virtu technology outputs over the motherboard’s single video output instead of, say, a dedicated card’s traditional multiple video outputs. For single screen gamers; however, Gigabyte motherboards with Virtu technology will be a boon.

Source: Gigabyte