Subject: General Tech | July 18, 2013 - 02:10 PM | Ken Addison
Tagged: z87 oc force, video, pq321q, podcast, gigabyte, fx-9000, asus, 4k
PC Perspective Podcast #260 - 07/18/2013
Join us this week as we discuss the Gigabyte Z87-OC Force, ASUS PQ321Q 4K Monitor, FX-9000 Processors and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Josh Walrath, Jeremy Hellstrom and Allyn Malventano
Program length: 1:17:39
Week in Review:
0:28:00 Galaxy GeForce GTX 770 GC Review
News items of interest:
Hardware/Software Picks of the Week:
1-888-38-PCPER or firstname.lastname@example.org
Introduction and Technical Specifications
Courtesy of GIGABYTE
The GIGABYTE Z87X-OC Force is the flagship board in GIGABYTE's LGA1150 line of boards. GIGABYTE used the previous generation flagship board, the Z77X-UP7, as a template and improved the design to take the new build to even greater performance heights. In addition to the fan-cooled and optionally water-cooled heat pipe, the board includes the latest iteration of GIGABYTE's power system, dubbed Ultra Durable 5 Plus. For a flagship board, performance and craftsmanship comes at a premium. For $419.99, the Z87-OC Force is a sound investment.
Courtesy of GIGABYTE
Courtesy of GIGABYTE
GIGABYTE designed the Z87X-OC Force with an impressive 16-phase digital power delivery system, powered by International Rectifier (IR) manufactured PowIRstage™ ICs and PWM controllers. GIGABYTE integrated a plethora of features into the Z87X-OC Force including: 10 SATA 6Gb/s ports; dual Intel GigE NICs; five PCI-Express x16 slots for up to quad-card support; two PCI-Express x1 slots; onboard power, reset, BIOS reset, pre-power (OC Ignition), base clock up/down, CPU ratio up/down, OC Tag, OC Gear, and OC Turbo buttons; dual BIOS, BIOS select, PCIe port, and LN2 switches; 2-digit diagnostic LED display; integrated voltage measurement points; and USB 2.0 and 3.0 port support.
Courtesy of GIGABYTE
Subject: Graphics Cards | July 9, 2013 - 04:45 AM | Tim Verry
Tagged: windforce 450w, gtx 760, gigabyte, factory overclocked
Gigabyte is reportedly launching a new GTX 760 graphics card with 4GB of GDDR5 memory. It will be paired with the company’s WindForce 450W cooler and uses the same PCB as its Gigabyte GTX 770 sibling.
The upcoming Gigabyte GTX 760 4GB WindForce OC is model number GV-N760OC-4GD. As the name suggests, the card comes with a decent factory overclock on the GPU. The card uses NVIDIA’s GTX 760 GPU with 1,152 CUDA cores, 96 TMUs, and 32 ROPs within 6 SMX units. Gigabyte has overclocked the GPU to 1085 MHz base and 1150 MHz boost. For comparison, the reference GTX 760 is has a base clockspeed of 980 MHz and a boost clockspeed of 1033 MHz. Memory on the Gigabyte GTX 4GB WindForce OC remains the same as the stock design, at 6GHz, there is just more of it at 4GB total versus the stock 2GB of GDDR5.
The factory overclocked card features an eight-phase VRM and the company’s WindForce 3X 450W cooler. The dual slot, triple fan cooler has three 80mm fans cooling two aluminum fin stacks that connect to the copper baseplate via two 8mm and four 6mm heatpipes. It is rated to cool up to 450W TDPs. Because this factory overclocked graphics card is based on the same PCB Gigabyte used for its GTX 770, it requires a single 6-pin and a single 8-pin PCI-E power connector. This setup should provide ample power to push voltage and get higher overclocks, the specific GPU permitting.
There is no pricing or availability information yet, but expect it to be around $270 since its 2GB sibling has an MSRP of $260. Additional photos of the new graphics card can be found over at Tech Power Up.
For more details on the GTX 760 GPU, check out our full review of NVIDIA's latest GK-104 based graphics processor!
Subject: Motherboards | July 2, 2013 - 02:06 PM | Jeremy Hellstrom
Tagged: gigabyte, z87, Z87X-UD5H
Gigabyte's new Z87X-UD5H is more than just a chipset refresh, they've included 12 phase digtial power, fuses and ESD protection on the USB ports as well as high quality ICs and long life capacitors. The board can handle multiple GPUs on its two PCIe 16x slots, running at 8x when both are populated and additionally has a 4x and three 3x slots for any other cards you might want to install. A brand new UEFI offers an attractive interface but [H]ard|OCP were not as impressed with some of the functionality of the new UEFI on the board. Check out their full review here.
"Gigabyte brings a lot to the test bench with the Z87X-UD5H. New UEFI, New Easy Tune software, and a whole lot more. Gigabyte is facing some very tough competition based on what we’ve seen from other manufacturers. Does Gigabyte still have what it takes to compete? Let’s find out."
Here are some more Motherboard articles from around the web:
- ASUS Z87-Deluxe @ [H]ard|OCP
- MSI's Z87-GD65 Gaming motherboard @ The Tech Report
- MSI Z87-G45 GAMING (Intel LGA 1150) @ techPowerUp
- Asus Z87-C @ eTeknix
- ASUS Maximus VI Extreme Z87 @ Bjorn3D
- ASUS Z87 Deluxe Motherboard Review @ Hardware Canucks
- MSI Z87 MPOWER @ eTeknix
- MSI Z77A-G45 GAMING Motherboard @ Benchmark Reviews
- ASUS ROG Maximus VI Hero Review @ OCC
- GIGABYTE GA-Z87X-OC (Intel LGA 1150) @ techPowerUp
- ASUS Z87-PRO Motherboard Review @ HiTech Legion
- Gigabyte Z87X-UD3H @ eTeknix
- ASRock Z87 Extreme4 Motherboard @ Hardware Secrets
- Gigabyte G1.Sniper M5 @ eTeknix
- Intel DZ87KLT-75K "Kinsley Thunderbolt" Motherboard Review @ HiTech Legion
- Asus P8Z77-V @ X-bit Labs
- BIOS Option Of The Week - PCI Pipelining @ TechARP
- MSI FM2-A85XMA-E35 Micro ATX Motherboard Review @ HiTech Legion
- ASUS Sabertooth 990FX R2.0 Review @ OCC
Subject: Graphics Cards | June 26, 2013 - 09:19 PM | Tim Verry
Tagged: windforce 3x, triangle cooling, gtx 760, gk-104, gigabyte, gaming
Not to be left out, Gigabyte is also releasing its own take on the GTX 760 Kepler GPU. This new GTX 760 Overclock Edition uses the company’s WindForce 3X cooler with “Triangle Cooling” technology. The card is model GV-N760OC-2GD and is available now from various retailers for around $260.
The GTX 760 OC Edition card has a GTX 760 GPU with a base clock of 1085 MHz and boost clock of 1150 MHz. Unfortunately, memory (2GB GDDR5) remains the same as stock cards at 6008 MHz.
The factory overclock on the GPU is among the highest options, but is not the highest clocked GTX 760 card. The reference card is clocked at 6008 MHz for the memory and a GPU base and boost clockspeed of 980 MHz and 1033 MHz respectively. The card supports the company’s OC Guru II overclocking utility as well, for adventurous enthusiasts wishing to see just how far they can push their particular cards on air cooling.
Gigabyte is using its WindForce 3X cooler for this overclocked model. The cooler features three angled fans and a custom fin stack with direct contact copper heat pipes to effectively transfer heat away from the GPU. Gigabyte uses two 8mm and four 6mm heatpipes to get heat into the fin array.
The Gigabyte GV-N760OC-2GD GTX 760 Overclock Edition is available now for $259.99.
Introduction and Technical Specifications
Courtesy of GIGABYTE
The GIGABYTE Z87X- UD3H is one of the newest members of the GIGABYTE Intel Z87 product lineup. The board features a fully redesigned power system, dubbed Ultra Durable 5 Plus, designed to handle the power needs for an LGA1150 CPU under any circumstances. At a retail price of 189.99, the Z87X-UD3H remains ahead of the curve with an aggresive price point.
Courtesy of GIGABYTE
The Z87X-UD3H comes standard with an 8-phase digital power delivery system, featuring International Rectifier (IR) manufactured PowIRstage™ ICs and PWM controllers. GIGABYTE integrated the following feature set into the Z87X-UD3H: eight SATA 6Gb/s ports; an Intel GigE NIC; three PCI-Express x16 slots for up to dual-card support; three PCI-Express x1 slots; one PCI slot; onboard power, reset, BIOS reset, and switch BIOS buttons; 2-digit diagnostic LED display; integrated voltage measurement points; and USB 2.0 and 3.0 port support.
Courtesy of GIGABYTE
Computex 2013: Gigabyte Preparing Custom GTX Titan With WindForce 450W Cooler... Some Assembly Required
Subject: Graphics Cards | June 7, 2013 - 01:20 PM | Tim Verry
Tagged: windforce 450w, windforce, gtx titan, gk110, gigabyte
Back in April, Gigabyte showed off its new custom WindForce 450W GPU HSF, but did not name which specific high end graphics cards it would be used with. So far, NVIDIA's highest-end single GPU solution, the GTX Titan, has been off limits for GPU manufacturers as far as putting custom air coolers on the cards (NVIDIA has restricted designs to its reference cooler or factory installed water blocks).
It seems that Gigabyte has found a solution to the cooler restriction, however. The company will be selling a GTX TITAN with model number GV-NTITAN-6GDB later this year that will come with NVIDIA's reference cooler pre-installed along with a bundled WindForce 3X 450W cooler and instructions for switching out the coolers.
Gigabyte Is Showing Off the custom GTX Titan at Computex, as discovered by TechPowerUp.
Users that do take Gigabyte up on its offer to switch to the custom WindForce cooler will still be covered under the company's standard warranty policy, which is a good thing. The kit is likely to be more expensive than your standard TITAN though as Gigabyte is having to sell the card with two coolers and increased support costs. On the other hand, users could swap out the coolers and then sell the unused TITAN reference cooler to offset some of the cost of the kit.
Gigabyte is actually showing off the new graphics card with WindForce 3X 450W cooler at Computex this week. The dual slot WindForce cooler is said to keep a GTX 680 2°C and 23.3 dB quieter than the reference cooler when running the Furmark benchmark suite. The major benefit of the WindForce is having three large fans that can spin at lower RPMs to give you the same cooling performance as the reference NVIDIA design at a much lower noise volume rather than pure cooling performance. Should you be looking to push the TITAN to the extreme, a water block would be your best bet, but for many users i think the allure of a quieter air cooled TITAN may be enough for Gigabyte to snag a few adventurous enthusiasts willing to put up with assembling the new card themselves.
More information on the WindForce 3X 450W cooler can be found here.
Computex 2013: Gigabyte Shows Off GA-990FXA-UD7 AM3+ Motherboard That Hints At 5GHz AMD FX Processor
Subject: General Tech, Motherboards | June 5, 2013 - 02:13 PM | Tim Verry
Tagged: gigabyte, ga-990fx-ud7, computex 2013, computex, amd fx, amd, am3+
Gigabyte is showing off quite a few motherboards at Computex 2013. One of the most interesting motherboards on display is the GA-990FX-UD7 for AMD AM3+ desktop processors. This is a high-end motherboard for enthusiasts and is packed with features.
The GA-990FX-UD7 features an 8+2 power phase, AM3+ CPU socket, four DDR3 DIMM slots, six PCI-E 2.0 x16 (physical) slots, one legacy PCI slot, and eight SATA 3 6Gbps ports. It has a black and glossy orange color scheme with large finned heatsinks around the CPU socket and over the southbridge. The board uses a Realtek ALC889 chipset for onboard audio that supports Dolby Home Theater and has a 108dB SNR rating. Further, the GA-990FX-UD7 supports 4-way SLI or CrossFire, Gigabyte's UEFI DualBIOS, and 3X power which allows faster battery charging for supported USB-connected mobile devices.
The Gigabyte GA-990FX-UD7 at Computex 2013 as spotted by Sweclockers (Click for larger image).
Rear IO includes a single coaxial S/PDIF and six analog audio outputs, four USB 3.0 ports, two eSATA+USB combo ports, and a RJ45 LAN jack.
Interestingly, Gigabyte's Computex display mentions that the new AM3+ motherboard is compatible with AMD's 5GHz AM3+ processor, which lends credibility to previous rumors of a Piledriver-based eight core “Centurion” AMD FX processor clocked at 5GHz with a 220W TDP. That chip was rumored for a summer 2013 release in limited quantities, and it looks like enthusiasts might be able to get their hands on that chip later this year after all!
Although AMD is not talking, Sweclockers has managed to put together a list of preliminary specifications for the codenamed Centurion processor. Rumors have it that the Centurion chip will be officially named the AMD FX-9000, and that it is a 4-module, 8-core part with a 4.8 GHz base clock and 5.0 GHz turbo clockspeed. It has a total of 8MB L2 cache, and 8MB of L3. Further, this 220W TDP part will support a maximum of DDR3-1866 (officially, before overclocking) and is build on AMD's 32nm SOI HKMG manufacturing process. You will need a beefy air cooler at the minimum to keep this chip happy, but otherwise it should be a fun chip for enthusiasts to tinker with!
Subject: General Tech, Systems | June 4, 2013 - 05:40 AM | Tim Verry
Tagged: Kabini, Intel, haswell, gigabyte, computex 2013, computex, brix, amd
Earlier this year, Gigabyte showed off a new small form factor (SFF) mini PC called the Brix during its New Idea Tech Tour. Those initial models came equipped with Intel Ivy Bridge processors, two SO-DIMM slots (a maximum of 16GB of DDR3 1600MHz memory), one mSATA slot, and one mPCI-E connector for storage and wireless networking respectively. The Brix hardware is housed in an aluminum chassis that doubles as a heatsink. However, since the Brix's debut, both Intel and AMD have come out with new more power efficient processors. In light of this, Gigabyte is not only showing off the original Brix PC at Computex 2013, but a new SKU called the GB-XM1 that comes equipped with your choice of Intel Haswell or AMD Kabini processors.
The new 4.5 x 4.2 x 1.2" Gigabyte Brix XM1 PC supports mSATA, mPCI-E, dual display outputs, USB 3.0, and is VESA mountable. The Haswell variant's processor options range from a Core i3-4010U to a Core i7-4500U. On the AMD side of things, the GB-XM1 is available with options ranging from the E1-2100 to the A4-5000. All of the AMD "Kabini" chips are outfitted with 12 Radeon cores, but they differ from there. The highest-end chip, the A4-5000, is a quad core with 2MB of L2 cache while the lower tier chips are dual cores with only 1MB of L2 cache. The following chart outlines all of the Haswell and Kabini CPU choices.
|GB-XM1 (Haswell)||GB-XM1 (Kabini)|
For more information on Kabini, check out our review of the AMD A4-5000 Kabini processor. If you need a refresher on Intel's Haswell architecture, you can also find a review of the Core i7-4770K here.
Gigabyte has not released pricing or availability information on the GB-XM1, but expect the Kabini models to be noticeably cheaper than the Haswell counterparts. Thankfully, it is not all bad news for Kabini users, as the Radeon cores help the low power processor accomplish 3D and media playback tasks, as noted in Josh's review.
For those interested in the mini Brix PC as a media center box or low-power desktop PC, Engadget reports that Gigabyte is also experimenting with specialized Brix SKUs, including a wireless charging pad for mobile devices and another Brix with a Pico projector. These accessories are merely prototypes at this point and may not go into mass production.
I'm glad to see Gigabyte moving forward with its Brix lineup to provide a useful alternative to Intel's NUC.
Subject: Systems, Mobile, Shows and Expos | June 3, 2013 - 01:33 PM | Tim Verry
Tagged: windows 8, u21m, Intel, haswell, gigabyte, convertible tablet, computex 2013, computex
Gigabyte launched its U21M convertible tablet at Computex this week. The Windows 8 PC is an 11.6” convertible notebook that is 20mm thick and weights approximately 3.28 pounds (or 3.06 lbs without HDD). It is powered by an Intel Haswell CPU with HD4000 processor graphics and it runs the full x86-64 version of Windows 8.
The notebook features a black and slate gray colored chassis that has a brushed metal texture over the top of the keyboard deck and display bezel. Design wise, it is reminiscent of Dell's Latitude XT series with more curves. The U21M uses a similar center 180-degree hinge that allows the display to be rotated around and then laid flat against the keyboard to enable tablet mode. There are no face function buttons on the display bezel aside from the Windows key, however.
Gigabyte has made ample use of the 11.6” form factor by designing a keyboard that stretches from one side of the system to the other. The six-row keyboard looks to be well laid out with good spacing between the keys and no real key placement oddities. key travel may be an issue though as the keys are close to the metal, as it were. Below the keyboard is a large touchpad with hardware mouse buttons.
The display itself is an 11.6” capacitive touchscreen with a resolution of 1366 x 768. There does not appear to be digitizer/stylus support on the U21M, however. Above the touchscreen is a 1.3MP webcam. It also features two 1.5W speakers.
External IO options include:
- 2 x USB 3.0
- 2 x USB 2.0
- 1 x VGA
- 1 x HDMI
- 1 x RJ45 (Gigabit Ethernet)
- 2 x Audio
- 1 x SD
- 1 x SIM card slot
Internally, the U21M does not disappoint, with an Intel Haswell CPU, up to 8GB of DDR3 memory, and either a 128GB or 256GB mSATA SSD plus an optional mechanical hard drive up to 1TB. There is no discrete GPU, however. The system will rely on the Haswell CPU's processor graphics, though Gigabyte has not announced specific chips so the iGPU used is unknown. Wireless connectivity options include 802.11b/g/n Wi-Fi, Bluetooth 4.0 + LE, and a built-in 3.5G radio. The system uses a respectable 7.4V, 40Wh Lithium-Polymer battery.
Gigabyte has not yet released pricing or availability dates, but you can find all the specifications along with additional photos on this product page.
My thought on this system is that it might be a good upgrade once my Dell Latitude XT finally dies on me (heh). It should definitely be faster and get much better battery life than my current convertible tablet, that's for sure! I'll be on the lookout for reviews, but what do you think about the U21M so far? If only it came in blue...