Subject: Processors | October 23, 2012 - 02:44 PM | Jeremy Hellstrom
Tagged: vishera, Steamroller, piledriver, FX-8350, fx-8150, FX-6300, FX-6200, bulldozer, amd
The FX-8350 Vishera processor from AMD has finally arrived with 8 fully unlocked cores of polished Piledriver processing power. With Piledriver there are no huge changes to the existing Bulldozer architecture, this is more of a polishing and optimizing the existing architecture and [H]ard|OCP's testing bears that out. While faster than the previous generation FX-8150 it still lags behind Intel's Ivy Bridge processors, disappointing but certainly expected. The unlocked cores do lend themselves somewhat to overclocking, with [H] hitting a stable 4.6GHz with all cores enabled, a 10% jump in frequency. At that speed it does better when competing with Intel's offerings, until you overclock them as well at which point the comparative performance suffers somewhat.
Make sure to catch Josh's review, covering both the 8 core FX-8350 and the $132 FX-6300 which has a disabled module; bringing back memories of older AMD chips whose modules could be brought back to life.
"AMD's new Piledriver core technology should not be a surprise to any enthusiast as much of its "embargoed" information has already been exposed on the Net. Today we take the AMD FX series model 8350 desktop variant, code named Vishera, and look at it in an enthusiast way as we expose its IPC at 4GHz, and a bit of overclocking."
Here are some more Processor articles from around the web:
- AMD's FX-8350 processor @ The Tech Report
- AMD FX-8350 "Vishera" Linux Benchmarks @ Phoronix
- AMD FX-8350 8-Core Black Edition Processor Review @ Legit Reviews
- AMD Vishera FX-8350 Review @ OCC
- The Vishera Review: AMD FX-8350, FX-8320, FX-6300 and FX-4300 Tested @ AnandTech
- AMD FX-8350: Piledriver @ Bjorn3D
- AMD FX-8350 @ Overclockers.com
- AMD FX-8350 vs Intel Core i7-3770K @ 4.8GHz - Multi-GPU Gaming Performance @ VR-Zone
- FX-8350 vs. Core i5-3470 CPU Review @ Hardware Secrets
- AMD FX-8350 (AM3+) Piledriver Processor Review @ eTeknix
- AMD FX-8350 Unlocked "Vishera" Octal Core CPU Review @ Hi Tech Legion
- AMD FX-8350 Vishera Desktop Processor @ Benchmark Reviews
- AMD FX-8350 and FX-6300 @ Legion Hardware
- AMD Piledriver FX Review - FX 8350, 8320, 6300 vs Intel Core i5 and i3 @ hardCOREware
- AMD FX-8350 Processor Review @ HardwareHeaven
- AMD FX-8350 and FX-6300 Piledriver @ TechSpot
- FX-8350 CPU Review; AMD's Vishera Arrives @ Hardware Canucks
- AMD FX8350 BE / Gigabyte HD7970 / ASUS Sabretooth 990FX R2 @ Kitguru
- AMD FX 8350 @ Guru of 3D
- AMD FX-8350 - "Piledriver" for AMD Socket AM3+ @ techPowerUp
Bulldozer to Vishera
Bulldozer is the word. Ok, perhaps it is not “the” word, but it is “a” word. When AMD let that little codename slip some years back, AMD enthusiasts and tech journalists started to salivate about the possibilities. Here was a unique and very new architecture that promised excellent single thread performance and outstanding multi-threaded performance all in a package that was easy to swallow and digest. Probiotics for the PC. Some could argue that the end product for Bulldozer and probiotics are the same, but I am not overly fond of writing articles containing four letter colorful metaphors.
The long and short of Bulldozer is that it was a product that was pushed out too fast, it had specifications that were too aggressive for the time, and it never delivered on the promise of the architecture. Logically there are some very good reasons behind the architecture, but implementing these ideas into a successful product is another story altogether. The chip was never able to reach the GHz range it was supposed to and stay within reasonable TDP limits. To get the chip out in a timely manner, timings had to be loosened internally so the chip could even run. Performance per clock was pretty dismal, and the top end FX-8150 was only marginally faster than the previous top end Phenom II X6 1100T. In some cases, the X6 was still faster and a more competent “all around” processor.
There really was not a whole lot for AMD to do about the situation. It had to have a new product, and it just did not turn out as nicely as they had hoped. The reasons for this are legion, but simply put AMD is competing with a company that is over ten times the size, with the resulting R&D budgets that such a size (and margins) can afford. Engineers looking for work are a dime a dozen, and Intel can hire as many as they need. So, instead of respinning Bulldozer ad nauseum and releasing new speed grades throughout the year by tweaking the process and metal layer design, AMD let the product line sit and stagnate at the top end for a year (though they did release higher TDP models based on the dual module FX-4000 and triple module FX-6000 series). Engineers were pushed into more forward looking projects. One of these is Vishera.
Subject: General Tech | April 5, 2012 - 04:32 PM | Ken Addison
Tagged: Vertex 4, ssd, podcast, ipad, Intel, gpu, FX-6200, cpu, amd, 680
PC Perspective Podcast #196 - 04/05/2012
Join us this week as we talk about the new iPad, the OCZ Vertex 4, AMD FX-6200 CPU and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the iTunes Store
- RSS - Subscribe through your regular
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malvantano
This Podcast is brought to you by
- 1-888-38-PCPER or firstname.lastname@example.org
- http://twitter.com/ryanshrout and http://twitter.com/pcper
- 0:01:45 The New iPad (2012) Review: Pixel Power
- 0:07:00 SilverStone Strider Gold Evolution 1000W Power Supply Review
- 0:09:00 OCZ Vertex 4 512GB SSD Initial Review - Vertex Returns to its Indilinx Roots (Firmware Progression Testing)
- 0:25:00 AMD FX-6200 CPU Review: A Small Bulldozer Refresh
- 0:37:00 This Podcast is brought to you by
, and their all new Sandy Bridge Motherboards!
- 0:38:50 IOLO U-NO-LOL. Ed Bott not amused by system optimizer ad
- 0:40:10 PC bill of materials articles creeps lower.
- 0:42:15 The fine waterline between genius and madness; toilet water PC cooling
- 0:46:15 NVIDIA urges you to program better now, not CPU -- later.
- 0:52:50 OCZ isn't the only one with a new drive today, Hitachi now offers a 4TB Ultrastar
- 0:57:00 This week: FX-6200, GTX 680 SLI and Surround Performance Testing, Z77 motherboards, MAINGEAR SHIFT system review
- 1:00:00 Hardware / Software Pick of the Week
- 1-888-38-PCPER or email@example.com
- http://twitter.com/ryanshrout and http://twitter.com/pcper
More MHz for the Masses
AMD has had a rough time of it lately when it comes to CPUs. Early last year when we saw the performance of the low power Bobcat architecture, we thought 2011 would be a breakout year for AMD. Bulldozer was on the horizon and it promised performance a step above what Intel could offer. This harkened back to the heady days of the original Athlon and Athlon 64 where AMD held a performance advantage over all of Intel’s parts. On the graphics side AMD had just released the 6000 series of chips, all of which came close in performance to NVIDIA’s Fermi architecture, but had a decided advantage in terms of die size and power consumption. Then the doubts started to roll in around the April timeframe. Whispers hinted that Bulldozer was delayed, and not only was it delayed it was not meeting performance expectations.
The introduction of the first Llano products did not help things. The “improved” CPU performance was less than expected, even though the GPU portion was class leading. The manufacturing issues we saw with Llano did not bode well for AMD or the upcoming Bulldozer products. GLOBALFOUNDRIES was simply not able to achieve good yields on these new 32 nm products. Then of course the hammer struck. Bulldozer was released, well behind schedule, and with performance that barely rose above that of the previous Phenom II series of chips. The top end FX-8150 was competitive with the previous Phenom II X6 1100T, but it paled in comparison to the Intel i7 2600 which was right around the same price range.
Subject: Processors | February 28, 2012 - 12:51 PM | Josh Walrath
Tagged: trinity, FX-8120, FX-6200, FX-4170, FX, FM3, bulldozer, amd, am3+
Since AMD held their Analysts’ Day, we have not heard a whole bunch from their CPU division. The graphics side has been in full gear launching the HD 7000 series of products, and soon we will see the final pieces of that particular puzzle fall into place. What about the CPU group? We have heard about Trinity for ages now, but that particular launch is still months away. The last CPU update detailed the “K” series of unlocked Llano chips. What about Bulldozer? Is there a new stepping? How is GLOBALFOUNDRIES’ 32 nm SOI/HKMG progressing?
I don’t have all those answers, unfortunately. Since AMD proceeded to sack most of the PR team, our contacts have all but disappeared. Questions emailed to AMD are often not returned. Requests for CPU information (or samples) are ignored. Are these people just simply overworked, or is AMD clamping down on information? Hard to say. My guess here is that they are taking the philosophy of, “No news is good news.” If a company does not send out review samples, they do not have to deal with products receiving bad reviews. I am not saying that the FX processors are necessarily bad, but they do not match up well against Intel’s latest Sandy Bridge parts. At least AMD parts are priced appropriately overall for their level of performance. If we look at overall results, the FX-8150 does match up fairly well with the i5-2500K, and they both exist very close to each other in price points.
What we do know is that AMD has released two new processors into the market with the FX-4170 and the FX-6200. The FX-4170 is a new dual module (four core) 125 watt TDP part that is clocked at an amazing 4.2 GHz stock speed, and a turbo that goes to 4.3 GHz. This is the fastest consumer grade processor in terms of clockspeed, but it obviously is not the fastest processor on Earth. The original FX-4100 is a 95 watt TDP part at 3.6 GHz stock/3.8 GHz turbo, 4 MB L2 cache, and 8 MB of L3. The FX-6200 is perhaps the more interesting of the two. It has a base clock of 3.8 GHz and a max turbo speed of 4.1 GHz. This is a pretty hefty increase from the FX-6100 with its base 3.3 GHz and 3.9 GHz turbo. The 6100 is a 95 watt TDP part while the new 6200 is 125 watt TDP. The 6200 is a three module (six core) part with 6 MB of L2 cache and 8 MB of L3.
The last bit of news is that the FX-8120 is getting a price cut to put it more in line against the competition. The email that we received about this and the previous announcements was amazingly generic and fairly uninformative. We do not know the prices, we do not know the rollout schedule, and we have no idea how much the FX-8120 is going to be chopped. We have seen the retail market already cut the prices down on the FX-8xxx series. The high end FX-8150 was introduced around $289 but now it can be readily available for $259. Now that demand has dropped in the PC sector and AMD’s supply has caught up, it is no wonder we are seeing new SKUs and the lowering of prices.
My goal is to try to get a hold of some of these parts, as they do look interesting from a value standpoint. The FX-6200 is of great interest for many users due to the nice provisioning of cores, L3 caches, and speeds. Throw in a decent price for this particular product, and it could be a favorite for budget enthusiasts who want to stick with AMD products. The area where it does fall down is that of TDP when compared to Intel’s Sandy Bridge parts at that price point. The jump to 3.8 GHz base speed and 4.1 GHz turbo should make it very comparable in stock clocked performance to anything Intel has in that price range.
Overclocking could be interesting here, but since it is already a 125 watt TDP part I do not know how much headroom these products have. 4.8 GHz is very likely, but on air cooling I would not expect overclocked speeds to reach much more above that. Still, these are interesting parts and give plenty of bang for their price. Add in pretty mature support for AM3+ motherboards, and AMD still has a chance with enthusiasts. The only real issue that is looming is PCI-E 3.0 support for the AM3+ ecosystem. We have not heard anything about the upcoming (or is it cancelled?) 1090FX chipset, other than it is based on 890FX/990FX and should not support PCI-E 3.0. With AMD’s push for APUs, I would expect the upcoming Trinity parts to introduce PCI-E 3.0. AMD also looks like they will start funneling the enthusiasts towards FM2 platforms and Trinity based parts. While AMD looks to support AM3+ with Piledriver based cores, my best guess here is that AM3+ will be phased out sooner rather than later.
The next 6 months will be critical for AMD and their path moving forwards. At the very least we will have a better idea of where the company is going under the new management. I am still expecting some big changes from AMD, and if Trinity can give Intel a run for its money in terms of per clock CPU performance, then they could have a winner on their hands and adjust their roadmap to further exploit that particular product release.
Get notified when we go live!