Subject: Cases and Cooling | September 25, 2016 - 10:31 PM | Tim Verry
Tagged: In Win 509, in win, full tower, E-ATX Case
In Win recently took the wraps off of a high end mid full tower case called the 509. The new full tower is constructed from SECC steel and uses edge-to-edge tempered glass on the front and side panels. It measures 527mm x 235mm x 578mm (HxWxD) (which is approximately 20.78” x 9.25” x 22.75”) and comes in black with either dark gray or ROG-certified red accents. The case is available now at various retailers (such as Newegg) for a cool $184.99 plus shipping.
On the outside, the In Win 509 sticks to the basics with simple lines. There are vents along the edges of the front panel and hexagonal honeycomb vents on the right side panel for ventilation in addition to vents along the bottom and rear panels. There are no top exhaust vents on this case which helps maintain the clean look. The left side panel is an edge-to-edge piece of tinted tempered glass that can be removed with four thumb screws. A magnetic system might have been a better looking choice but the screws are likely more secure and help against vibration noise.
Further, the front panel hosts a single right-aligned 5.25” bay, the front I/O (four USB 3.0 and two audio), and a large tempered glass panel. There is an LED-lit In Win logo that can be seen through the glass panel. The LED will light up red by default but if you have an RGB LED controller or RGB LED header on your motherboard you can customize the color.
Cooling is a bit less traditional on the In Win 509 and interestingly there are no included fans with the case. Users can install fans in the following positions:
- 3 x 120mm in the front
- 1 x 140mm on the rear panel
- 2 x 140mm or 3 x 120mm on the bottom (including the PSU fan).
There is a large removable filter in the bottom (much to Ryan’s dismay), and users can alternatively install 360mm water cooling radiators in the side, front, or middle of the case depending on whether or not they need all the drive cages installed.
Internally, the In Win 509 supports bottom mounted power supplies with grommeted cable routing holes, E-ATX motherboards, CPU towers up to 188mm high, and graphics cards up to 370mm in length. The case offers eight PCI slots and brackets to help secure large and heavy GPUs. On the storage front, the case supports five 3.5” drives (three on bottom and two on top) as well as four 2.5” vertical bays that users can choose to install either SSDs or 120mm fans.
In all it looks like a well-built case and seems to be backed up by reviews. According to Bit-Tech, the In Win 509 is easy to work in and has excellent water cooling support; however, the lack of fans does hurt its out of the box cooling performance. It is available now with a three year warranty.
Introduction and Specifications
The Phanteks Enthoo Primo is a massive full-tower case with a monolithic appearance, and a ton of cooling support. It's tall, heavy, and certainly looks every bit the premium enclosure the price tag indicates. So how did it perform? Read on to find out!
We've reviewed other cases in the Enthoo series from Phanteks, and these have been a solid choice in their respective price ranges. The cases we've looked at offer excellent construction, nice appearance, and excellent component support. The Enthoo Primo sits at the top of the lineup, and it looks it; a nearly 26-inch tall case that is nearly as deep, it's so large it even has a second ATX power supply mount (a dual PSU adapter is offered as a separate purchase).
So what market does this Enthoo Primo case serve? It could house any sort of enthusiast or high-end workstation/server setup, supporting EATX and even SSI EEB motherboard form-factors. There's a ridiculous amount of liquid cooling potential, though given its size the average all-in-one cooler will need to stay close to the processor given the length of typical AIO cooler hoses. This thing is begging for a custom watercooling loop (sorry, I didn't oblige in this review).
The Enthoo Primo is fitted with an aluminum faceplate
Subject: Cases and Cooling | January 9, 2016 - 02:27 PM | Sebastian Peak
Tagged: tempered glass, In Win 509, in win, full tower, enclosure, CES 2016, CES, case
Among the enclosures in the colorful In Win booth at CES was the 509, a new steel and tempered glass full-tower design.
(Left to right:) In Win 805 concept, 909, and new 509 full tower
The 509 is another striking design that looked particularly good with RGB lighting shown, and offers these features according to In Win:
- Tempered Glass Front and Side Panels
- Supports Versatile Cooling Options
- User Friendly Installation
- Excellent Expandability and Optimized Gaming Performance
- Form-Factor: Full Tower
- Material: SECC, Tempered Glass
- Motherboard: E-ATX /ATX/ Micro-ATX (Max: 12" x 13")
- Expansion Slots: 8
- Supports graphic card length up to 370mm, height up to 186mm
- Storage Support:
- External 5.25” x1
- Internal 3.5” / 2.5" x5, 2.5" x2
- Air Cooling Support:
- Front: 120/140mm Fan x3
- Vertical: 120/140mm Fan x2
- Rear: 120/140mm Fan x1
- Side: 120/140mm Fan x1
- Bottom: 120/140mm Fan x 1
- Water Cooling:
- Front: 360/280mm Radiator (HDD bracket must be repositioned)
- Vertical: 280/240mm Radiator (HDD bracket must be repositioned)
- CPU Cooler: Supports at least 184 mm in height
- PSU Support: ATX 12V, PSII Size and EPS up to 230mm (215mm with Bottom Fan)
- Front I/O: USB 3.0 x2, USB 2.0 x2, HD Audio
No specifics on pricing or availability just yet.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: Cases and Cooling | January 6, 2016 - 03:12 PM | Tim Verry
Tagged: thermaltake, mid tower, full tower, atx
The new Core X71 and Core X31 computer cases adorn the Thermaltake booth at CES this week, and are the latest in the company's Core series. Both cases are built using cold rolled steel and are aimed at enthusiasts looking to overclock using high end air or liquid cooling.
The Core X71 is a full tower case clad in all black with a mesh front panel and a clear side panel window on the left side. It uses a dual chamber design that separates the power supply, cooling, and storage from the main heat generating components (motherboard, CPU, and graphics). The case is practically all ventilation and can support fans or radiators on all sides with everything but the rear fan covered by removable dust filters.
Users can install up to an ATX motherboard and all manner of high end graphics cards thanks to the removable drive cage. Water cooling grommets are positioned on the rear panel and cable management grommets run along the motherboard tray and through the floor of the main chamber into the power supply chamber.
Three drives can be installed behind the motherboard tray in addition to two 3.5" drives in a moveable drive cage and the two 5.25" bays. Cooling can be air or water with up to three 140mm fans in front, three 140mm on top, and three 120mm fans on both the left and right sides of the bottom chamber. Further, there is room for a single 140mm fan on the bottom and the rear panels.
The Core X31 is a miniature version of the X71 bringing it's modularity and emphasis on cooling to a smaller package. Sitting on rounded feet, the X31 has the same black exterior with mesh vents on the front, top, and rear (but not on the sides). A large side panel window takes up the left side and shows off most of the interior. The X31 comes with a black cover to conceal the power supply and give you space to store the inevitable rat's nest of cables to keep the rest of the system looking neat and tidy.
This mid-tower case can support Mini ITX, Micro ATX, and full size ATX motherboards along with graphics cards up to 420mm long and 180mm tall CPU heatsinks. Storage support includes two 5.25" drive bays, three 3.5" drives in drive racks, three 3.5" drives behind the motherboard tray, and two 2.5" SSDs on top of the power supply cover. The case comes with three fans (and in the case of the Core X31 RGB Edition variant three Riing 12 RGB high static pressure fans with a fan controller) and users can install fans (or water cooling radiators) in the following configurations:
- Front: 2 x 140mm
- Top: 3 x 140mm
- Rear: 1 x 140mm
- Bottom: 2 x 140mm
The Core X71 and Core X31 have two USB 3.0, two USB 2.0, and one HD Audio port along the top edge of the case. Both cases will be available next month in the US as well as the UK, Germany, Australia, and New Zealand shortly. The Core X71 is currently priced at $150 at Newegg. The base model Core X31 costs $100 and the RGB Edition is $130.
Follow all of our coverage of the show at http://pcper.com/ces!
Introduction and First Impressions
Antec’s P-series enclosures have been around for quite a while, and have been known as quiet, stylish cases for a premium build. It had been quite a while since the last entry in the series as the previous model, the P280, which received our Gold Award when Ryan reviewed it way back in 2011, and this current version hit the market in January of 2015. Needless to say, Antec’s Performance enclosures have some staying power. So how does this latest entry stack up?
The new P380 carries an MSRP of $229.95, placing it in the higher end of the premium enclosure market. While it can certainly be found for less (around $140 currently on Amazon) the bar is still set pretty high when the price exceeds $100, though the P380 is in a different world than Antec's Signature S10 enclosure, which launched at a mind-boggling $499 (it has since come down considerably). With the highly competitive enclosure market offering a number of spacious and quiet options, the P380 will need to differentiate to succeed.
“When only the best can satisfy your needs, the P380 is the answer. Known for its minimalistic design, the Performance series focuses on delivering the perfect balance between performance and Quiet-Computing. Whether you’re designing your ultimate dream PC or, just creating a monster file server, the P380 should be the choice, without hesitation.”
Antec is obviously confident about this newest P-series enclosure and I’ll be putting it to the test using a new, more stringent enclosure review process. We'll take a look at the case inside and out, and then see how it performs with a gaming build using both a closed-loop liquid CPU cooler, and a conventional air CPU cooler to see how the case airflow affects warm components.
Subject: Cases and Cooling | September 17, 2015 - 07:00 AM | Sebastian Peak
Tagged: Lian Li, full tower, enclosure, cases, aluminum case
Looking for a super deluxe way to hold just about any size rig? Lian Li has a sophisticated looking option with the new X510 full-tower enclosure.
An all-aluminum case (of course - it's Lian Li!) with a no-nonsense design aesthetic and very roomy interior, the X510 still keeps a fairly trim profile thanks to the omission of 5.25-inch drive bays.
Here are some of the key features from Lian Li:
- Isolated air chambers for efficient cooling
- Fits huge components – 330mm VGA Card, 180mm CPU cooler, 245mm PSU length
- Eight expansion slots
- Support for eight total drives
- Tempered glass window for showing off hardware
- Included fan speed controller
The glass side window and included fan controller are nice touches, and while the X510 carries a steep MSRP it doesn't seem out of place for an all-alumimum case like this (depending on performance). So what is pricing/availability? The X510 should be available later in September for $399.
Introduction and First Impressions
The Antec Signature Series S10 is the company's new flagship enclosure, and it looks every bit the part. A massive full-tower design with seemingly no expense spared in its design and construction, the S10 boasts many interesting design details. So is it worth the staggering $499 price tag? (Update: A day after our review was published Newegg cut the $499 MSRP by $150, taking the S10 down to $299 after a $50 rebate.)
The Signature S10 is an interesting product to be sure. Antec, long renowned as a maker of premium cases has in recent years lost some of the cachet that they once had with enthusiasts. This is no reflection on Antec and more a result of the industy's flood of enclosures into the market, with virtually every brand filling all price segments. Corsair, SilverStone, Fractal Design, Lian Li, Cooler Master, In Win, NZXT, BitFenix, Phanteks, and the list goes on and on...
So where does the new S10 enclosure fit into this market? Antec made the daring move of placing the Signature enclosure directly at the top with a shocking $499 retail price - which subsequently dropped to $449 and then again to $349 before a $50 rebate. I can think of no other recent enclosure this expensive at launch other than the In Win S-Frame, and it positioned the S10 as an unattainable object for most builders. So was Antec successful in creating an aspirational product - even before the recent price cuts?
Is that... Batman??
Subject: Cases and Cooling | April 21, 2015 - 05:58 PM | Jeremy Hellstrom
Tagged: enermax, Thormax Giant, full tower
With all the focus on SFF systems lately it is nice to see a big hearty full sized case now and again. Enermax has released just such a case, the Thromax GT which can house four 5.25" drives, five 3.5" and a 2.5" hidden behind the motherboard mount or a variety of other setups depending on your use of the converters, up to an including eight 2.5" at the cost of all your 3.5" and two of the 5.25" bays. E-ATX boards will fit, with up to nine expansion slots and if you chose air cooling many of the grates will accept 180mm or even 200mm fans with dust filters which easily slide out for cleaning. Modders-Inc were more than impressed with the volume, the fully featured front panel and the $159.99 price tag. Check out the full review here.
"Full-tower cases are sought after for the extra room they provide for system building but if size is the only thing they offer then things would get boring fast. With the market as competitive as it is, case manufacturers have begun looking into offering more than space and design cases that appeal to a lifestyle rather than be an all-in-one …"
Here are some more Cases & Cooling reviews from around the web:
- The Old Lady In A Newish Dress – A Review Of Antec’s P70 Mid-Tower Chassis @ Techgage
- Fractal Design Define S @ techPowerUp
- In Win D-Frame Mini @ Modders-Inc
- SilverStone Precision PS11B-Q @ Kitguru
- Corsair Hydro H100i GTX @ Benchmark Reviews
- Corsair Hydro H100i GTX & H80i GT Review @ Hardware Canucks
- Noctua NH-U9S Review @ OCC
Subject: Cases and Cooling | March 17, 2014 - 04:43 PM | Jeremy Hellstrom
Tagged: phanteks, Enthoo Primo Ultimate Chassis, full tower
With watercooling becoming more and more common some manufactures are trying to make it easier by designing cases which are set up to accommodate radiators. Phanteks' Enthoo Primo Ultimate is a pefect example as it ships with a bracket to help you install a radiator with up to two 140mm fans. Pet owners will love the filtres set up on all intake ports on this case including ones on the bottom which are very easily accessible. [H]ard|OCP were very impressed with this case; even more so when you consider this is Phanteks' first foray into this part of the cooling market.
"Phanteks is known for its wide variety of fans, but is broadening its brush stroke by now building its own computer cases. The Enthoo Primo Ultimate Chassis is a full tower computer case that promises the "Ultimate Water Cooling Solution," as well as removable filters, and a thermally isolated PSU location."
Here are some more Cases & Cooling reviews from around the web:
- Aerocool Strike-X Xtreme @ Funky Kit
- Cougar MX500 ATX Mid-Tower @ eTeknix
- Thermaltake Core V71 Full Tower @ NikKTech
- AZZA XT 1 Full Tower Case Review @HiTech Legion
- Rosewill Legacy MX2-B Mid-Tower Case Review @ Legit Reviews
- Thermaltake Urban T21 Mid-Tower Case Review @HiTech Legion
- Silverstone RV04-B Raven Full Tower @ eTeknix
- AzzA XT 1B Full Tower Case Review @ OCIA
- In Win 904 @ techPowerUp
- Corsair Graphite Series 230T Case Review @ Hardware Secrets
- BitFenix Colossus M MicroATX @ Benchmark Reviews
- XFX TYPE01 Bravo Midi-Tower @ eTeknix
- CASECOM CL-86 HALCONES Full Tower Case Review @HiTech Legion
- XFX Type01 Bravo @ Kitguru
- Antec ISK-600 mITX @ eTeknix
- BitFenix Colossus Mini-ITX @ techPowerUp
- BitFenix Shadow ATX Case Review @ Modders-Inc
- Xigmatek Nebula @ Legion Hardware
- Cryorig R1 Ultimate CPU Air Cooler @ [H]ard|OCP
- BeQuiet Dark Rock Pro 3 Heatsink Review @ Frostytech
- be quiet! Dark Rock 3 CPU Cooler Review @HiTech Legion
- Silverstone Argon Series AR04 Ultra Low Profile CPU Cooler @ eTeknix
- SilentiumPC Fera 2 HE1224 @ techPowerUp
- Thermolab LP53 Low Profile CPU Cooler Review @HiTech Legion
- Thermolab ITX30 Ultra-Low Profile CPU Cooler Review @HiTech Legion
- Thermalright HR-22 Passive CPU Cooler @ NikKTech
- Raijintek Nemesis Cooler Review: Is It a New Supercooler @ X-bit Labs
- Can’t Stand Your Noisy Fan? Here’s a Plan, Man @ Hack a Day
- Kiss Quiet I-Bat 120mm Cooling Fan @ Funky Kit
- Enermax LIQMAX 120S All-In-One CPU Cooler @ Modders-Inc
- Antec Kuhler H2O 1250 240mm Liquid CPU Cooler Review @HiTech Legion
- Enermax Liqtech 120X Liquid CPU Cooler Review @ Madshrimps
- Enermax Liqtech 120mm & 240mm AIO Water Cooler @ eTeknix
- Antec KUHLER H2O 1250 Liquid CPU Cooling System @ NikKTech
Subject: Cases and Cooling | January 17, 2014 - 09:46 PM | Tim Verry
Tagged: water cooling, thermaltake, full tower, eatx, core v71
Thermaltake recently launched the Core V71, which is an attractive full tower case with a modular drive bay design and plethora of cooling options. The cold rolled steel (SPCC) chassis is all black with large mesh front and top panels. A large side panel window and LED fans show off the internals.
The full tower Core V71 measures 23" x 9.1" x 22" (583x230x560mm) and supports E-ATX motherboards, 8 PCI slots, 185mm tall CPU coolers, up to 400mm long graphics cards (with hard drives removed, 310mm with the drives installed), two 5.25" drive bays, and eight 3.5" or 2.5" hard drives. The drive cages are tool-less and can be completely removed from the case. In fact, users can take out the drive cages and support bar to completely rid the PC of drive bays. Alternatively, users can utilize two hidden drive bays on the back of the motherboard tray to maintain a clean design without completely sacrificing 3.5" storage.
The case has a spot for a standard ATX PSU in the bottom of the case and numerous rubber grommets for routing and hiding cables behind the motherboard tray.
As far as cooling, users can go with water cooling radiators and/or air cooling. The cooling possibilities work out as follows:
- Top: 2 x 200mm / 140mm or 3 x 120mm
- Front: 2 x 200mm / 140mm or 3 x 120mm
- Rear: 1 x 140mm / 120mm
- Bottom: 2 x 120mm
That works out to as many as nine 120mm fans or four 200mm fans and three 120mm fans if you opt for air cooling. On the water cooling front, users could put as many as two 420mm (or smaller) radiators, one 240mm radiator, and one 120mm radiator. This would be a good use case (heh) for NZXT's Kraken G10 GPU water cooling mount with allows users to cool their GPU(s) using CPU-style closed loop water coolers in 120mm and 240mm varieties or even going all out with a custom water cooling loop for every component in the system. There are a lot of possibilities with this full tower case!
In all, the Core V71 appears to be a really nice full tower option with decent looks, tool-less bays, and ample cooling mounts. The case will be available soon with an MSRP of $160 in the US. For a new full tower that's not bad and has my interest!