Subject: Storage | April 11, 2012 - 09:43 PM | Allyn Malventano
Tagged: Vertex 4, ocz, Octane, Marvell, everest
We've covered the OCZ Octane and more recently the new OCZ Vertex 4. We've also seen how they behave under wildly differing firmware revisions. What have we not yet seen? Turns out the hardware powering both the Octane and Vertex 3 controllers was actually from Marvell.
Judging from the performance we saw from the Octane, it's clear that Indilinx is cranking out some great firmware for this hardware, but it's a bit of a surprise to us that the Indilinx arm of OCZ chose to go this route as opposed to spinning their own next gen controller, especially in light of how well the original Indilinx Barefoot was received back in the day.
It turns out that 'Indilinx Infused' is more than just a catch phrase.
As evidenced by some commenters over at the source, some feel cheated that this news did not come to light earlier. My take on it is that an SSD is a package deal - controller hardware *and firmware* make up that package. If a company can deliver both in a reliable and well performing manner, then it's that companies product you are buying, not just the controller.
Subject: Storage | November 24, 2011 - 05:57 PM | Jeremy Hellstrom
Tagged: ssd, sata 6Gbs, sata, ocz, Octane, Indilinx, everest
OCZ's new Octane SATA 3 SSDs will be available in sizes up to 1TB, though you can expect to pay a pretty penny for it; not that a 1TB HDD is inexpensive right now. It uses a pair of new Indilinx controllers and sports 512MB of SYNC DDR3 SDRAM to help those controllers work to peak effectiveness. It uses OCZ's proprietary NDurance technology to add to the longevity of the drive, a topic near and dear to the SSD enthusiasts heart even if we have yet to see significant failure rates; though certainly the decrease in performance early SSDs showed is both a concern and very much real. SSD Review had no qualms handing it a Top Value award at the end of their review.
"Our review today will be a long awaited look at the OCZ Octane 6Gbps 512GB SSD. Eight months ago, OCZ bought Indilinx with full intention of spreading their wings in the development of their own proprietary controller based on the Indlinx Everest design. OCZ has spoken of higher incompressible data performance, quicker disk access as well as better sustained write performance in a consumer driven SSD that will be immediately available in capacities up to 1TB."
Here are some more Storage reviews from around the web:
- OCZ Octane 512GB SATA III SSD Launch Review @ HardwareHeaven
- OCZ Technology Octane 512GB @ Tweaktown
- Patriot Pyro SE 120GB Solid State Drive Review @ eTeknix
- OCZ Synapse Cache SSD 64GB Review @ Real World Labs
- Samsung 470 Series 256 GB SSD @ Kitguru
- Corsair Performance pro SATA 3 256GB SSD Review @ The SSD Review
- ADATA S511 240GB @ Legion Hardware
- Patriot Pyro SE 240GB & Wildfire 240GB @ kitguru
- ADATA 16GB S102 USB 3.0 @ Funkykit
- Kingston DataTraveler HyperX 3.0 64 GB @ Kitguru
- LaCie 5Big Network 2 Professional 5-bay RAID Server @ TechwareLabs
- QNAP TS-219 PII @ Bjorn3D
- Samsung MB-MS8GA 8GB microSDHC Card Review @ Tech-Reviews
- Understanding Wireless Storage: Kingston Wi-Drive and Seagate GoFlex Satellite @ AnandTech
Introduction, Specifications, and Packaging
A few months back, OCZ acquired Indilinx. Ever since, we've been wondering if the next generation Indilinx offering could stand up to the competition, who has made leaps and bounds since the first generation SSD controllers were released.
- 128GB Max Performance
- 256GB Max Performance
- 512GB Max Performance
- 1TB Max Performance
Here's a basic block diagram of the new Everest controller from Indilinx. All of the usual bits are present, of particular note being the ability to drive 8 channels, with each channel rated at 4-way. This should mean an Everest could theoretically drive 32 flash chips.
Subject: General Tech, Graphics Cards, Systems, Storage | May 4, 2011 - 06:43 PM | Jeremy Hellstrom
Tagged: ssd, everest, benchmarking, benchmark, aida64, aida
BUDAPEST, Hungary - May 04, 2011 - FinalWire Ltd. today announced the immediate availability of AIDA64 Extreme Edition 1.70 software, a streamlined diagnostic and benchmarking tool for home users; and the immediate availability of AIDA64 Business Edition 1.70 software, an essential network management solution for small and medium scale enterprises.
The new AIDA64 release further strengthens its solid-state drive health and temperature monitoring capabilities, and implements support for the latest graphics processors from both AMD and nVIDIA.
New features & improvements
- LGA1155 B3 stepping motherboards support
- Preliminary support for AMD “Bulldozer” and “Llano” processors
- Intel 320, Intel 510, OCZ Vertex 3, Samsung PM810 SSD support
- GPU details for AMD Radeon HD 6770M, Radeon HD 6790
- GPU details for nVIDIA GeForce GT 520, GT 520M, GT 550M, GT 555M, GTX 550 Ti, GTX 590
Pricing and Availability
AIDA64 Extreme Edition and AIDA64 Business Edition are available now at www.aida64.com/online-store. Additional information on product features, system requirements, and language versions is available at www.aida64.com/products. Join our Discussion Forum at forums.aida64.com.
Get notified when we go live!