Subject: Storage | June 16, 2016 - 06:54 PM | Jeremy Hellstrom
Tagged: SK Hynix, enterprise ssd, SE3010
SK Hynix's SE3010 uses their own controller, the eight channel SH87910AA Pearl and in the case of the 960GB model, eight 16nm 128Gb MLC NAND chips with a mysterious H27Q18YEB9a label and four capacitors to prevent data loss in the case of unexpected power loss. The drive is optimized for read speeds and Kitguru's testing certainly shows that they were effective in their implementation. Check out the write speed and overall conclusions in the full review.
"When we last looked at an SSD from SK hynix it was from their consumer portfolio. This time around we are looking at a drive from the other part of their storage business in the shape of the SE3010, a read intensive drive for the Enterprise market space."
Here are some more Storage reviews from around the web:
- Crucial's MX300 SSD @ The Tech Report
- Crucial MX300 750GB Limited Edition @ Kitguru
- Crucial MX300 @ The SSD Review
- Samsung 750 EVO 500GB SSD @ Guru of 3D
- Samsung Portable SSD T3 (1TB) @ Bjorn3d
Subject: Storage | August 8, 2014 - 06:16 PM | Jeremy Hellstrom
Tagged: ultrastar, hgst, enterprise ssd, 20nm
HGST has refreshed their 12Gbit/s SAS series of Ultrastar SSDs with denser 20nm which has upped the read speeds though the writes do suffer somewhat. As they are enterprise drives they have rather impressive lifespans, the 800GB is rated at 25 full drives writes/day for the length of the 5 year warranty. They also offer encryption and erasure tools that are superior to enthusiast drives, along with a much higher price tag. The Register also offers information on the new Ultrastar HDDs and a link to the spec sheets but as of yet we do not have any benchmarks.
"HGST has refreshed its Ultrastar enterprise SSD line, using denser 20nm NAND to replace the previous 25nm flash, doubling capacity, upping read performance but lowering write performance a tad in the process."
Here are some more Storage reviews from around the web:
- Toshiba THNSNJ HG6 256 GB @ techPowerUp
- Crucial MX100 512GB SSD Review @ Hardware Canucks
- Hynix SH920 128GB SSD @ Kitguru
- Kingston SSDNow V310 960GB SSD Review @ Legit Reviews
- Silicon Power Slim S60 240GB SSD Review @ NikKTech
- Kingston HyperX Fury 240GB @ eTeknix
- Samsung 845DC PRO @ The SSD Review
- Leef Supra 3.0 and Ice 3.0 16GB Flash Drive Review @ Legit Reviews
- Netgear ReadyNAS 516 @ Legion Hardware
- Synology DS414slim @ techPowerUp
- Thecus N7710-G NAS Server Review @ NikKTech
- Synology Embedded DataStation EDS14 @ Legion Hardware
- Seagate Enterprise Capacity 3.5 HDD v4 6TB Review @ Neoseeker
Subject: Storage | December 5, 2013 - 10:08 PM | Jeremy Hellstrom
Tagged: hgst, SAS, ssd, SSD800MM, enterprise ssd
For Enterprise level performance nothing beats SAS as it can sustain transfer speeds of up to 12Gbps if your storage media is fast enough. The partnership of Intel and HGST bring you just such a drive, rated at 700MB/s and 1150MB/s for sequential reads and writes and IOPS of 145K and 70K for random reads and writes respectively. If that isn't enough to make you jealous, The SSD Review also had a chance to test this SSD as part of an eight disk RAID.
"If you have been following The SSD Review in 2013, you are probably familiar with our coverage of 12Gbps SAS. Throughout the year we have covered HBAs, RAID Adapters, Enclosures and SSDs. We have been incredibly busy reviewing new products, but one product in particular has stood out. In all of our 12Gbps SAS reviews we have sung the praises of the HGST SSD800MM. Since the SSD800MM was more of a means to an end when reviewing the LSI SAS 9300-8e, we never really gave it its proper due. With this update, we wanted to put this SSD into perspective after nearly a year’s worth of 12Gbps SAS testing."
Here are some more Storage reviews from around the web:
- Toshiba PX02SS 12Gbps SAS Enterprise (400GB) @ SSD Review
- OCZ Vector 150 240GB @ Legion Hardware
- M.2 NGFF PCIe SSD Adapter @ SSD Review
- ioSwitch Raijin M.2 NGFF PCIe @ SSD Review
- VisionTek Data Fusion PCIe (480GB) @ SSD Review
- Western Digital RED 4TB Hard Drive Review @ Hardware Canucks
- Western Digital Red (WD40EFRX) 4 TB NAS Hard Disk Drive @ TechARP
- Synology DS1513+ Scalable NAS for SMB Review @ Madshrimps
- Western Digital My Cloud 2TB @ eTeknix
- Thecus N2560 NAS Server @ NikKTech
- Western Digital Black² Dual Drive Review – Two drives in one! @ TechwareLabs
- Western Digital Black² 1TB Dual Drive Review @ Hardware Canucks
- WD Black² Dual Drive @ Legion Hardware
- iStarUSA BPN-2535DE-SA SATA 6Gb/s Hot-Swap Cage @ NikKTech
- Lexar JumpDrive P10 32 GB USB 3.0 @ techPowerUp
- Buffalo LinkStation LS421DE Enclosure @ Kitguru
- ADATA HE720 500GB Slim External Hard Drive Review @HiTech Legion
- ADATA DashDrive HV620 External Hard Drive @ Benchmark Reviews
Subject: Storage | September 24, 2013 - 07:23 PM | Jeremy Hellstrom
Tagged: ssd, ocz, enterprise ssd, deneva 2, 19nm
SAN JOSE, CA – September 24, 2013 - OCZ Technology Group, Inc. (Nasdaq:OCZ), a leading provider of high-performance solid-state drives (SSDs) for computing devices and systems, today announced the latest addition to the popular Deneva 2 Series which now utilizes 19 nanometer (nm) NAND flash. The new models are 2.5-inch, 6Gbps SATA III-based Multi-Level Cell (MLC) drives that implement the Deneva 2 SSD Series feature-set and are built around a smaller NAND flash process geometry. This cutting-edge drive solution also features a completely new power architecture that was designed from the ground up to optimize server back plane functionality, providing enhanced management of in-rush current and power fluctuation. The result is an advanced SSD series that delivers superior storage performance, enterprise-class endurance, reliability and quality, and excellent total cost of ownership for customers.
“Our Deneva 2 has been a popular SSD series among IT professionals not only as an HDD replacement but to dramatically accelerate I/O access of such popular enterprise applications as OnLine Transaction Processing, database warehousing, read intensive data caching and server boot-ups,” said Daryl Lang, SVP of Product Management for OCZ Technology. “By implementing new features and the latest NAND flash process geometry we are able to deliver an optimal balance of I/O performance and cost-efficiency to our customers.”
The new Deneva 2 SSDs continue to utilize the proven and effective LSI SandForce® SF-2281 processor and delivers exceptional performance with 19nm toggle mode NAND flash. The performance specifications support read bandwidth up to 550 MB/s, write bandwidth up to 520 MB/s, random read throughput (4K blocks) over 45,000 input/output operations per second (IOPS), and random write throughput (4K blocks) over 34,000 IOPS. It provides consistent sustained performance over time so that users can achieve faster file transfers, boot-ups and benefit from a more responsive storage experience. With a priority on reliability and flash-optimized enterprise endurance, the new Deneva 2 includes advanced features such as data fail recovery, intelligent block management, wear leveling and robust error correction. Additionally, power consumption has also been lowered in the new models as well.
The new Deneva 2 SSD Series are now available in three models supporting 120GB capacity (Model D2CSTK251M3T-0120), 240GB capacity (Model D2CSTK251M3T-0240) and 480GB capacity (Model D2CSTK251M3T-0480). For more information, visit www.ocz.com/enterprise.
Subject: Storage | August 14, 2013 - 02:11 PM | Tim Verry
Tagged: Samsung, charge trap flash, vertical nand, vnand, 128Gb, enterprise ssd
Last week, Samsung announced that it had started producing a new stackable NAND flash memory called V-NAND, or vertical NAND. The new 3D V-NAND would initially be available in 128Gb (Gigabit) chips, but could eventually scale into as much as 1 Tb (Terabit) per chip by stacking additional dies vertically. Doing so allows Samsung some flexibility in scaling to higher capacities without going to increasingly expensive and difficult to manufacturer smaller manufacturing processes, which has been the traditional method of attaining denser flash.
The company has now announced the V-NAND SSD, which is its first Solid State Drive to use the Vertical NAND technology. Aimed at the enterprise server market, the V-NAND SSD will come in 480GB and 960GB capacities. The 2.5” form factor drives are 7mm thick and come equipped with a SATA III 6Gbps controller. On the high end, the 960GB model uses 64 MLC 3D V-NAND 128Gb dies for a total physical capacity of 1TB. However, user-accessible capacity will be only 960GB. Unfortunately, Samsung did not reveal how many physical chips the drives use, so its hard to say how those 64 128Gb dies are distributed (4 high in 16 chips or 8 high in 8 chips, etc).
The 960GB Samsung V-NAND SSD spotted by Engadget.
Samsung claims that the V-NAND SSD offers up to 20% increased performance and a 40% reduction in power consumption versus previous SSDs. Further, the 3D NAND using Samsung’s Charge Trap Flash technology is rated at 35K program erase cycles. Samsung rates the V-NAND memory itself as being twice as fast in writes and between two and ten times as reliable versus traditional 19nm floating gate NAND (the alternative to CTF NAND).
Samsung's 128Gb V-NAND die.
Samsung stated in a press release that it started production of the V-NAND SSD earlier this month. While it is introducing V-NAND into enterprise drives first, the technology will eventually trickle down into consumer drives. I’m interested to see this drive benchmarked for performance and write endurance to see if the 3D flash lives up to its potential.
Subject: General Tech | February 27, 2013 - 06:11 PM | Jeremy Hellstrom
Tagged: ssd, enterprise ssd, SAS, micron, micron p410m
Micron has announced a new SSD, the P410 SSD which will use a Serial Attached SCSI interface, perfect for dropping into existing enterprise servers. SATA is perfectly fine for SOHO users and enthusiasts but for large businesses with a need for extreme reliability, SAS has been the interface of choice. Adoption of SSDs has been slowed in large businesses in part because it would require changing the existing architecture to SATA in order to incorporate SSDs into their systems. With the new Micron drive that is no longer necessary, at 7mm it will support high density servers and with the 25nm MLC NAND it is expected to survive for five years of duty with 10 full drive fills every day. Read more at DigiTimes.
"Micron Technology has announced another addition to its growing lineup of solid state drives (SSDs) targeted at data center appliances and enterprise storage platforms. The new Micron P410m SSD is a high-endurance, high reliability 6Gb/s Serial Attached SCSI (SAS) drive built to provide the performance necessary for mission-critical tier one storage applications that require uninterrupted, 24/7 data access."
Here is some more Tech News from around the web:
- AMD to sell a cut down version of Sony's Playstation 4 APU @ The Inquirer
- Google offers a single sign-on system, embraces 10 partners @ The Inquirer
- Benchmarking Ubuntu Linux On The Google Nexus 10 @ Phoronix
- Intel takes on all Hadoop disties to rule big data munching @ The Register
- Stuxnet worm dates back to 2005, Symantec reveals @ The Inquirer
- First Debian/Ubuntu Bootable ARM64 Images Released @ Slashdot
Subject: Storage | January 17, 2013 - 08:05 PM | Jeremy Hellstrom
Tagged: DC S3700, Intel, ssd, HET MLC, enterprise ssd
Before getting into the speed of the new Intel DC S3700 SSD, take a moment to consider the expected lifespan of the HET MLC flash, it was described to hardCOREware as "10 full drive writes per day over the 5-year life of the drive". Now that will not have a big impact on home users, but Enterprise and image/video editors will certainly take note as moving that much data is a common occurrence for those businesses and the questionable lifespan of some flash memory has been contributed to the slow pace at which SSDs have been taken up by large businesses. With the Intel name behind these drives, an assurance of long term usability and the impressive steady state performance they provide you may soon see these in a server room near you.
"The Intel SSD DC S3700 introduces a new Intel SSD controller for the first time in years. With a heavy emphasis on consistent performance, these drives bode well for the future of Intel SSD products. It may also refresh your opinion on some current SSDs that don't perform as consistently as others once they enter a steady state."
Here are some more Storage reviews from around the web:
- SanDisk Ultra Plus SSD @ SSD Review
- OCZ Vector 256GB SSD Review @ Techgage
- Kingston SSDNow V300 120GB SSD Upgrade Kit Review @ NikKTech
- OCZ Vector 512GB @ Legion Hardware
- Samsung 840 Pro 128GB SSD @ Tweaktown
- SanDisk Ultra Plus SSD @ AnandTech
- Micron P320h PCIe Enterprise SSD @ Tweaktown
- oshiba THNSNF 512GB SSD review: with proprietary controller @ Hardware.info
- Western Digital RE 4TB HDD @ TechwareLabs
- ICYDock MB981U3N-1SA SATA/IDE Hard Drive Adaptor @ PCSTATS
- Patriot Gauntlet (PCGTW320S) @ Bjorn3D
- EonNAS 1100 NAS Network Storage Server @ Benchmark Reviews
- Synology DS413j NAS Designed for Home & Offices Review@ Madshrimps
- ADATA DashDrive UD310 Jewel-Like Flash Drive Review @ Pro-Clockers
- Kingston DataTraveler HyperX Predator 512GB @ Kitguru
- Patriot SuperSonic Rage XT 32GB USB 3.0 Flash Drive Review @ NikKTech
- Kingston DataTraveler HyperX USB 3.0 64 GB @ techPowerUp
- Kingston DT Elite USB 3.0 64GB Thumb Drive Review @ XtremeComputing
- Kingston DataTraveler HyperX Predator 512GB USB 3.0 Flash Drive Review @ Legit Reviews
Subject: General Tech, Storage | December 6, 2012 - 03:01 AM | Scott Michaud
Tagged: Macronix, ssd, enterprise ssd
I have not been too worried about my SSD failing due to excessive write-erase wear and tear. Typical flash cells fail somewhere between a few thousand write cycles with high endurance drives creeping over the ten-thousand cycle border. It is quite rare for me, like many home users, to write to my SSD outside of application updates or profile changes on my web browser.
Enterprise customers tend to hammer on drives quite a bit more ferociously, however. It will primarily be those customers who are most interested in news recently published with the IEEE: modifications to the integrated circuit holding the flash cells can be made to recondition dead NAND cells.
SSDs have been able to be restored from write-erase degradation through excessive heating, think several hours at two-and-a-half times the sea-level boiling point of water. Clearly tossing SSDs in a range with your fries and chicken strips is not an ideal solution and would not be wise to recommend.
Macronix, the company who claims to have invented the technology based on research into competing Phase Change RAM (PCRAM), assert that their flash will survive at least ten-thousand times longer than enterprise NAND. Their integrated circuit has been designed to deliver extreme heat, 8-times the boiling point of water, local to the flash cell for a very brief time. The article boasts at least 100-million cycles because that was their point where their patience in testing the flash ended: the flash was still ready for more.
That said I do not claim to have too much knowledge about solid state flash so tune in for the December 5th PC Perspective Podcast for more discussion from smarter people. If you found this quick enough you could also tune in live just after this publishes!
Subject: Storage | April 17, 2012 - 05:11 AM | Tim Verry
Tagged: ssd, ioFX, fusion-io, enterprise ssd
Popular PCI-E SSD maker Fusion-io recently announced a new product aimed at professional content creators. Based on the company’s ioMemory technology, the new Fusion-io ioFX is a professional SSD designed to speed up video encoding, CAD work, 3D renders, and motion graphics.
The new solid state drive uses the PCI-E bus and 420 GB of fast QDP MLC NAND flash to deliver less than a millisecond of sustained access speed and an impressive 1.5 GB/s of bandwidth. The PCI-E SSD uses a physical x8 connector but is electrically a x4 connection. What I found interesting about the device was the presence of a fan, which our Storage Editor Allyn says is necessary in order to keep the super fast flash chips from overheating. When the SSD needs active cooling, that at least implies this drive is going to scream performance wise!
Another interesting aspect about this new drive is a piece of software called the ioSphere. The software will allow studios to remotely monitor all the Fusion ioMemory products deployed in the studio through a single interface. Unfortunately, there is not much more in the way of detailed performance specifications but I will definitely keep an eye on this for the drool factor alone. Fusion-io is currently listing the ioFX for $2,495 USD, and it will be available later this Spring 2012. More information should be posted to their site as the SSD gets closer to launch here.