ECS Motherboards on display at Computex 2011

Subject: Motherboards, Shows and Expos | June 4, 2011 - 10:42 PM |
Tagged: x79, fusion, ECS, e-350, computex, 990fx

ECS, aka Elitegroup, had a large booth at Computex that focused more on its ODM aspects than consumer aspects, but there were still a couple of interesting designs to look at.

ecs01.jpg

The board we spotted was the new A990FXM-A motherboard that is of course based on the latest 990FX chipset from AMD.  Supporting the AM3+ processor socket and thus the pending AMD Bulldozer processors, the 990FX is going to be a long term product rather than a short term. One interesting addition to the board is found on the chipset heatsink that has a temperature reactive plastic on it that will turn from grey to orange-ish as the ambient case temperature increases.  This could be a great feature to easily gauge the heat level inside a windowed case.  

ecs02.jpg

Also an interesting move, ECS has elongated the receptacle on the 8-pin CPU power connection to make it easier to plug in and to remove.  If you have ever experienced a pinched finger or sliced finger nail from trying to reach down and unplug an ATX connector, you will see this as a nice addition.

ecs03.jpg

ECS also had its X79 motherboard variant on display, showing the company's readiness for the pending Sandy Bridge-E release.

ecs04.jpg

Also on the motherboard wall was the upcoming A75F-A with support for the AMD Llano Fusion-based processors that should be ready later in the summer. 

ecs05.jpg

Finally, a motherboard that we have just recently received for review purposes, the HDC-I is an AMD E-350 or E-240 Zacate platform mini-ITX form factor.  This solution might be a great option for users looking to build an HTPC box so be sure you check out our full review coming shortly.

Computex 2011 Coverage brought to you by MSI Computer and Antec

Source: ECS

ECS Reveals Computex 2011 Hardware Lineup

Subject: Motherboards, Systems, Mobile | May 21, 2011 - 03:11 AM |
Tagged: hardware, ECS, computex

 

ECSComputex2011.png

ECS (Elitegroup Computer Systems) will be attending this years Computex 2011 convention, and they plan to unveil a slew of new hardware.  During the week, they will be showing off new motherboards, a new graphics card, four All-In-One PCs, two tablets, two notebooks, and an eBook reader of all things.

For the DIY enthusiasts, ECS will be showing off a AMD 990FX chipset motherboard, which will support AMD's Bulldozer processors, as well as a new series of motherboards "for cloud computing, home server, (and) work station."  While they were not willing to give out details at this time, they will have live high end gaming setups for attendees to demo at the show.  Further, ECS is releasing a NVIDIA GeForce 560 graphics card.  Again, they did not share any specifications, they claim that their card is 40% faster than its 460 predecessor.

All-In-One PCs will also be receiving a large showing at the ECS booth, with three SKUs of their "PC—G11" touch screen computer with wireless connectivity.  The DS110, MS300, and MS150 specifically will provide different levels of performance thanks to three differing levels of hardware (they mention CPUs and chipsets).

On the mobile front, ECS is unveiling two tablets.  The S10 is a 10.1" Atom Z670 tablet with a resolution of 1366x768 and HDMI out along with 802.11 b/g/n WiFi, Bluetooth 3.0, and "3G or GPS."  The V07 is a 7" tablet based on similar specifications that will be released in August 2011.  The MB40 and MB50 are 14" and 15" Sandy Bridge powered notebooks with LED displays at 1366x768 and featuring a 6-in-1 card reader.  Further, ECS is debuting a 6" and 8" touch screen eBook reader with WiFi, Bluetooth, and 3G.  The eBook reader will feature either a monochrome or multicolor display, and will run the Android mobile operating system.

Source: ECS