ECS Motherboard First to Support AMD Memory Profiles (AMP)

Subject: Motherboards | July 23, 2012 - 05:32 PM |
Tagged: motherboard, memory profile, memory, ECS, amp, amd

Elitegroup Computer Systems (ECS) recently announced its support for the new AMD Memory Profile (AMP) technology. The A85F2-A Deluxe will be the first of the company’s motherboards to support AMP.

AMP.JPG

AMP is AMD’s version of Intel Extreme Memory Profiles (XMP) which amounts to known-safe automatic overclock settings. The AMP profiles are stored in the DDR3 memory modules and can be read by supporting motherboards. Now knowing the proper voltage, CAS latencies, and timings to use, the motherboard can ideally automatically configure the modules to run at optimal speeds.

The setting will be able to be enabled/disabled in the BIOS of the new ECS motherboard, as shown in the screenshot below. According to its press release, ECS is the first company to integrate AMD Memory Profile support into its motherboards, and it is honored to lead the charge. “Making a unique and glory prominent product is the only purpose for ECS.”

DSC_0189.jpg

Here’s hoping the implementation works well and is more accurate than my experience with XMP profiles has been! Will you be using AMP in your AMD builds?

Source: ECS

ECS Announces A85F2-A Desktop Trinity FM2 Motherboard

Subject: Motherboards | June 1, 2012 - 10:06 PM |
Tagged: trinity, motherboard, fm2, ECS, desktop, a85f2-a

Taiwan-based motherboard maker ECS (Elitegroup Computer Systems) recently announced an ATX form factor motherboard based on the AMD A85X chipset. The most exciting feature is that this motherboard uses the AMD FM2 CPU socket, and it is ready to accept desktop Trinity processors!

A85F2-A Deluxe(A)02.jpg

The A85F2-A Deluxe motherboard comes equipped with two PCI-E 2.0 x16 slots for CrossfireX mutli-GPU setups, three PCI-E 2.0 x1 slots, and two legacy PCI slots. With four DDR3 DIMM slots, the board can support up to 64GB of memory. It further supports memory up to 2300MHz (officially). It also features seven 6Gb/s SATA ports with RAID 0, 1, 5, and 10 support.

A85F2-A Deluxe(B)01.jpg

External expansion (rear IO) includes six USB 3.0 ports, eight USB 2.0 ports, Gigabit LAN, and an eSATA connector. The A85F2-A Deluxe also features HDMI, DVI, and VGA video outputs as well as 8 channel analog audio.

On the software side of things, the motherboard has GUI uEFI BIOS, ECS MIB X, and support for multiple languages. The FM2 socket based motherboard also comes bundled with Norton AntiVirus, Muzee, Cyberlink Media Suite, and ECS iEZ (which is the driver and BIOS update (and fan control) utility.

The board has undergone numerous in-house tests (though be sure to also check out independent reviews), and has been rated ECS Nonstop Certified. The company also includes gold plated contacts and solid capacitors with the motherboard. It has also been rated for ESD protection on the VGA, USB, LAN, and HDMI ports.

The Trinity processor is the best part about the motherboard, however as it enables several new technologies including up to four displays, AMD Turbo Core 3, Open CL 1.1, and hardware video decoding with AMD’s UVD engine.

In addition to the A85F2-A Deluxe, ECS will also be releasing four other FM2 socket based motherboards including the A75F2-A2, A75F2-M2, A55F2-A2, and A55F2-M3. Unfortunately, there is no word yet on pricing or availability. Expect to see more details on these boards soon (possibly at Computex 2012?).

Source: ECS

PC Perspective Live Review Recap: Z77 Motherboard Roundup

Subject: Motherboards, Processors, Chipsets | April 13, 2012 - 11:37 PM |
Tagged: Z77, video, msi, live review, Intel, gigabyte, ECS, asus

A PC Perspective Live Review Recap is a recorded version of a previously live streamed event from http://pcper.com/live.  If you couldn't make the original air time, or simply want to re-watch, the on-demand version is provided below!

Z77 chipset based motherboards are already available and on the market and while we can't share performance or details on the Ivy Bridge processor yet, we can show off and discuss the Z77 chipset and motherboards.  In our Live Review we did a quick unboxing and preview of several models including:

  • MSI Z77A-GD65 - $169
  • Gigabyte Z77X-UD5H - $189
  • Intel DZ77GA-70K - $239
  • ASUS P8Z77-V Deluxe - $274
  • ECS Z77H2-AX (Non Golden Model - $164)

ECS trims the fat off and presents two new mini-ITX boards

Subject: Motherboards, Systems | March 29, 2012 - 11:59 AM |
Tagged: ECS, elitegroup, mini ITX, CDC-TI Thin, H61H2-TI Thin, SFF

The CDC-TI Thin Mini-ITX may not interest many readers as it is designed for an Atom processor which have never been terribly popular here at PC Perspective, even for HTPC builds.  The CDC-TI Thin Mini-ITX is a totally different story as it can handle LGA1155 chips and has an HDMI out, making it a beautiful choice for an HTPC or even a SFF portable gaming machine although you might be disappointed by the orientation of the full and half length PCIe slots.  Consider it a challenge and see if you can get a decent half height GPU in there!

Elitegroup Computer Systems (ECS), the world’s leading motherboard, graphics card, barebone system, notebook and mobile device manufacturer announces a variety of options of Thin Mini-ITX for users to meet their different demands with AIO (All-In-One) and motherboards. To target different segments, ECS Thin Mini-ITX motherboards are not only compatible with AIO but also with small form factor PCs, offering a wide range of solutions including H61H2-TI, H61H2-G11 and CDC-TI. With the growth in popularity of AIO, acceptance of the Thin Mini-ITX platform proves to be leading standard of this new trend, allowing for future-proof upgradeability.

CDC-TI(A)02.jpg

The brand new CDC-TI Thin Mini-ITX motherboard supports Intel® Atom™ D2700/D2550/D2500 Dual-core processors. The CPU and Memory are supported 100% by Solid Capacitors in order to provide better conductivity and longevity. CDC-TI features 2 x DDR3 SO-DIMM socket supporting up to 4GB, 2 x SATA 3Gb/s, 2 x USB 2.0, 2 Mini-PCIe (1 Full/ 1 Half), VGA, HDMI and LVDS support. It is distinguished by its fan-less design because of the lowest CPU power consumption of <10W TDP. ECS CDC-TI not only works well for Thin Mini-ITX AIOs but also for other form factors that can take advantage of a low-profile board.

H61H2-TI(A)02.jpg

The other H61H2-TI Thin Mini-ITX motherboard can support socket LGA1155 Intel® 2nd and 3rd Generation Core processors. It features Intel® H61 Express chipset with SATA 3Gb/s, 2 x DDR3 SO-DIMM socket up to 16GB, 2 x USB 3.0, 2 Mini-PCIe (1 Full/ 1 Half), 1 x mSATA, and HDMI input/output that deliver you an excellent performance and amazing experience. ECS H61H2-TI provides you a multi-functional solution within a limited space. Small but versatile.

Five X79 boards to choose from

Subject: Motherboards | January 23, 2012 - 05:22 PM |
Tagged: x79, asus, asrock, Intel, msi, ECS, lga2011, p9x79 deluxe, X79 Extreme9, X79R-AX, DX79SI, X79A-GD65(8D)

There are five usual suspects when discussing the X79 chipset, Asus's P9X79 Deluxe, the Asrock X79 Extreme9, ECS's X79R-AX, Intel's DX79SI and last but not least, MSI's X79A-GD65(8D).  While very similar overall, each board has distinct features that the companies have introduced as standard over the years, from ASUS' Q-LED to MSI's OC Genie.  TechSpot had their work cut out for them, the boards range in price by $100 and the board that they picked as the winner might just surprise you.

TS_Intel_10S.jpg

"Those wanting to build the ultimate performance system will naturally turn to Intel’s new LGA2011 platform which recently made its debut with the Sandy Bridge-E processors. This highly refined architecture takes the original Sandy Bridge design and pumps it full of steroids, while adding a few new things. Moreover, the platform is expected to support enthusiast-level Ivy Bridge processors that are slated for release by the end of 2012, adding to the platform's longevity.

So if you're already spending $600+ on a processor alone, you'll want to make sure your motherboard is equally impressive. Today we are checking out five high-end X79 motherboards from Asus, Asrock, ECS, Intel and MSI."

Here are some more Motherboard articles from around the web:

Motherboards

Source: TechSpot

ECS and their no holds barred approach to the X79 chipset

Subject: Motherboards | November 30, 2011 - 05:29 PM |
Tagged: ECS, X79R-AX Extreme, x79

ECS put out the X79R-AX Extreme and it certainly deserves that moniker.  They went for 4 USB 3.0 ports instead of 2, they included a CLRTC button on the back panel, dual NIC s and Bluetooth and as well as WiFi with an external wire style antenna.  Internally there are 8 SATA 6Gb/s ports and 4 SATA 3Gb/s ports, a diagnostic LED which also displays current CPU temperature and 4 PCIe x16 slots and 2 PCIe x1 slots.  That list goes far beyond the other Extreme X79 boards on the market.  Guru3D warns that the BIOS is more than a little confusing when you overclock but at roughly $300 to pick up when it becomes available this is a sweet example of an X79 motherboard.

g3d_ecsx79.jpg

"Today we take a look at the new motherboard from ECS, the X79R-AX Extreme. We'll throw in a decent photo-shoot and a benchmark suite at the product and get an indication what performance is like with the Intel Core i7-3960X (Sandy Bridge-E).

Admittedly I was a little shocked when the motherboard arrived, as it is probably the most feature rich X79 motherboard we've had in our labs."

Here are some more Motherboard articles from around the web:

Motherboards

 

Source: Guru3D

More industry fallout from the flooding in Thailand

Subject: General Tech | November 9, 2011 - 12:43 PM |
Tagged: asus, gigabyte, ECS, asrock, msi, market share

With HDD shortages come a reduced demand for most PC components as shipping a system without a hard drive tends to be frowned upon.  This will be hitting motherboard makers fairly hard over the last quarter of 2011.  DigiTimes reports an estimated 20% drop for Gigabyte; MSI, ECS and ASRock are expecting around a 10% decrease and ASUS projects somewhere in the neighbourhood of 5-10%.  We can certainly hope that there will be discounts offered in the attempt to focus on upgraders.  A nice price on some of the new motherboards that have just come onto the market might draw the attention of those who already have a fully functional PC but are considering a possible hardware refresh.

line-graph-down.jpg

"Motherboard makers have been impacted by HDD shortages arising from flooding in Thailand since mid-October, and are expected to see their fourth-quarter shipments decrease 10-15% on quarter, according to industry sources.

Gigabyte Technology may see shipments falling 20-25% from five million in the third quarter to below four million in the fourth."

Here is some more Tech News from around the web:

Tech Talk

 

Source: DigiTimes
Author:
Subject: Motherboards

Introduction and Specifications

icon2.jpg

Courtesy of ECS

ECS developed the HDC-I motherboard to take advantage of AMD's new Brazos platform that's based on the Hudson M1 chipset and their latest E-350 dual-core processor and integrated DDR3 800/1066 memory controller. The dual-core E-350 APU, which combines the CPU and GPU, brings a host of features to mini ITX enthusiasts like USB 3.0 compability, SATA 6Gb/s support, bluetooth and Radeon HD 6310 graphics and UVD 3 to play 3D Blu-ray and HD-1080P movies.

icon1.jpg

Courtesy of ECS

Another huge advantage of going with a mini ITX motherboard for your next home theater PC is the balance of computing power and power consumption that the AMD Brazos platform adds to the ECS HDC-I. The HDC-I is an energy-efficient motherboard that has integrated computing power and graphics firepower for users looking for an "all-in-one" solution for their next small form factor build.

Continue reading our review of the ECS HDC-I Fusion Mini ITX Motherboard!!

ECS Announces Three New A55 Based AMD Motherboards

Subject: Motherboards | August 9, 2011 - 06:42 PM |
Tagged: motherboard, ECS, APU, amd, A55

According to Tech Connect, ECS is about to release three ECS FM1 motherboards powered by the lighter A55 chipset to compliment the company’s higher end A75 boards. The new A55 based motherboards will be known as the A55F-A, A55F-M2, and the A55F-M3, the first being ATX and the remaining two boards being micro-ATX.

ECSA55F-A.jpg

The new motherboards will support AMD’s A Series APUs and will feature one PCI-E x16 slot, Gigabit Ethernet, and one VGA connection. The standard ATX sized A55F-A will further have four DDR3 DIMM slots, five SATA II 3Gb/s ports, 12 USB 2.0 ports, and HDMI and DVI video connectors. The A55F-M2 on the other hand with receive two DDR3 DIMM slots, six SATA 3Gb/s ports, 12 USB 2.0 ports, and HDMI and optional DVI connections. Lastly, the A55F-M3 has two DDR3 DIMM slots, four SATA 3Gb/s ports, and eight USB 2.0 ports.

More photos of the new boards can be seen here. Price and availability of the new A55 chipset motherboards have not yet been released.

Source: Tech Connect

ECS Motherboards on display at Computex 2011

Subject: Motherboards, Shows and Expos | June 4, 2011 - 10:42 PM |
Tagged: x79, fusion, ECS, e-350, computex, 990fx

ECS, aka Elitegroup, had a large booth at Computex that focused more on its ODM aspects than consumer aspects, but there were still a couple of interesting designs to look at.

ecs01.jpg

The board we spotted was the new A990FXM-A motherboard that is of course based on the latest 990FX chipset from AMD.  Supporting the AM3+ processor socket and thus the pending AMD Bulldozer processors, the 990FX is going to be a long term product rather than a short term. One interesting addition to the board is found on the chipset heatsink that has a temperature reactive plastic on it that will turn from grey to orange-ish as the ambient case temperature increases.  This could be a great feature to easily gauge the heat level inside a windowed case.  

ecs02.jpg

Also an interesting move, ECS has elongated the receptacle on the 8-pin CPU power connection to make it easier to plug in and to remove.  If you have ever experienced a pinched finger or sliced finger nail from trying to reach down and unplug an ATX connector, you will see this as a nice addition.

ecs03.jpg

ECS also had its X79 motherboard variant on display, showing the company's readiness for the pending Sandy Bridge-E release.

ecs04.jpg

Also on the motherboard wall was the upcoming A75F-A with support for the AMD Llano Fusion-based processors that should be ready later in the summer. 

ecs05.jpg

Finally, a motherboard that we have just recently received for review purposes, the HDC-I is an AMD E-350 or E-240 Zacate platform mini-ITX form factor.  This solution might be a great option for users looking to build an HTPC box so be sure you check out our full review coming shortly.

Computex 2011 Coverage brought to you by MSI Computer and Antec

Source: ECS