Subject: Systems | March 4, 2013 - 04:19 PM | Jeremy Hellstrom
Tagged: SFF, htpc, zotac, zbox ad06 plus, E2-1800
Zotac's ZBOX AD06 plus puts some graphical zip into a tiny package using an AMD E2-1800 1.7GHz and 2GB MHz DDR3-1333 with 320GB of local storage on a 5400RPM HDD. They've included a VESA mount so it is quite possible to attach this device to the back of a display and control most functions with the included remote control. Heat should not be an issue, when displaying 1080P clips it only pulls 16.8W, 27.7W when under full loads such as transcoding. The benchmark results that TechPowerUp saw might not measure up to a full desktop system but they are certainly at the top of the pile when it comes to similar systems. You can expect to pay just under $300 for the full system when it becomes available, or about $200 without RAM or HDD if you happen to have some handy.
"The Zotac ZBOX AD06 utilizes the newest generation of AMD APUs, while the Plus model comes fully configured with a 320 GB hard drive and pre-installed memory."
Here are some more Systems articles from around the web:
- Zotac ZBOX ID83 Plus Mini PC Review @ Hi Tech Legion
- Gateway SX2380-UR318 Review @ TechReviewSource
- Sapphire EDGE VS8 Barebones Model @ Kitguru
- High-End Meets Small Form Factor: GeForce Titan in Falcon Northwest's Tiki @ AnandTech
- iBuyPower Revolt System Review: Closing the Boutique and Opening the Store @ AnandTech
- PCSpecialist Vanquish Z11 @ Kitguru
- Building a DIY All-in-One PC with GIGABYTE's H77TN Thin Mini-ITX @ Tweaktown
- Apple Mac mini (2012) @ Hardware.info
Subject: Processors | June 6, 2012 - 05:08 PM | Josh Walrath
Tagged: Zacate, Hudson-M3L, FCH, E2-1800, E2-1200, computex, brazos 2.0, brazos, Bobcat, amd
Today AMD is officially releasing their Brazos 2.0 parts. This is a case of good news/bad news for the company. The good news is that they have an updated product that is based on their very successful Brazos 1.0 platform and that particular part has sold over 30 million units and is included in some 160 designs. The bad news is that AMD did not improve the product dramatically over what we previously had.
While Brazos will not beat these Intel offerings in pure performance, they do match up nicely in terms of price and battery life.
It is well known that AMD cancelled their original Bobcat 2.0 28 nm parts last fall (Krishna and Wichita), and instead worked on improving the fabrication of the current Brazos APUs. Little is known as to why those original 28 nm parts were cancelled, but perhaps the overriding reason is that there simply would not be enough 28 nm production through the first three quarters of 2012 to enable AMD to adequately meet demand on these parts (all the while sacrificing higher margin GPU wafer orders on the 28 nm node). We also must consider that AMD could have been counting on GLOBALFOUNDRIES to have their flavor of 28 nm HKMG process up and running, which of course at this time it is not.
These new Brazos 2.0 chips are still manufactured on TSMC’s 40 nm process, but that particular process is very mature at this time. This has allowed AMD and TSMC to squeeze every last drop of performance and efficiency out of the aging 40 nm node, and in so doing has allowed AMD a bit more headroom when it comes to the Zacate APUs that Brazos 2.0 is based off of. The two new processors are the E2-1800 and the E2-1200.
The E2-1800 is a dual core Bobcat CPU featuring an APU with 80 stream units based on the older HD 5000 series of parts. AMD has renamed the GPU to the HD 7340, though it has little in common with the GCN (Graphics Core Next) based HD 7000 graphics units. AMD increased the core CPU speed from the E-450 by 50 MHz and the GPU portion by 80 MHz. This gives the E2-1800 a core clockspeed of 1.7 GHz and the graphics runs at a brisk 680 MHz. This continues to be an 18 watt TDP part and the die size is the same 75 mm squared.