Subject: Storage | November 11, 2014 - 05:32 PM | Allyn Malventano
Tagged: Intel, ssd, dc s3500, M.2
Today Intel refreshed their Datacenter Series of SSDs, specifically their DC S3500. We have reviewed this model in the past. It uses the same controller that is present in the S3700, as well as the SSD 730 Series (though it is overclocked in that series).
The full line of Intel Datacenter SSDs (minus the P3700). DC S3500 is just right of center.
Todays refresh includes higher capacities to the S3500, which now include 1.2TB and 1.6TB on the hign end of capacity. This suggests that Intel is stacking 20nm dies as many as 8 to a package. IOPS performance sees a slight penalty at these new higher capacities, while maximum sequentials are a bit higher due to the increased die count.
Also announced was an M.2 version of the S3500. This packaging is limited to only a few capacity points (80GB, 120GB, 340GB), and is p;rimarily meant for applications where data integrity is critical (i.e. ATM's, server boot partitions, etc).
A standard press blast was unavailable, but full specs are listed after the break.
Introduction and Specifications
Intel has pushed out many SSDs over the years, and unlike many manufacturers, they have never stopped heavily pushing SSD in the enterprise. They did so with their very first push of the X25-M / X25-E, where they seemingly came out of nowhere and just plunked down a pair of very heavy hitting SSDs. What was also interesting was that back then they seemed to blur the lines by calling their consumer offering 'mainstream', and considering it good enough for even some enterprise applications. Even though the die-hard stuff was left to the SLC-based X25-E, that didn't stop some consumers from placing them into their home systems. The X25-E used in this review came from a good friend of mine, who previously had it installed in his home PC.
With several enterprise class models out there, we figured it was high time we put them all alongside each other to see where things are at, and that's the goal of this particular piece. We were motivated to group them together by the recent releases of the DC S3500 and DC S3700 drives, both using Intel's new Intel 8-channel controller.
|X25-E||SSD 320||SSD 710||SSD 910*||DC S3500||DC S3700|
|Capacity||32, 64GB||40, 80, 120, 160, 300, 600GB||100, 200, 300GB||400, 800GB||80, 120, 160, 240, 300, 480, 600, 800GB||100, 200, 400, 800GB|
|Write (4k)||3.3k||23k (8GB span)||2.7k||18.7k||11k||32k|
- Since the SSD 910 is subdivided into 4 or 2 (depending on capacity) physical 200GB volumes, we chose to test just one of those physical units. Scaling can then be compared to other units placed into various RAID configurations. 910 specs were corrected to that of the single physical unit tested.
- All other listed specs are specific to the tested (bold) capacity point.
Starting with the good old X25-E, which pretty much started it all, is Intel's original SATA 3Gb/sec 10-channel controller. Despite minor tweaks, this same controller was used in the X25-M, X25-M G2, SSD 320 and SSD 710 Series. Prior to Intel releasing their own 6Gb/sec SATA controller, they filled some of those voids by introducing Marvell and SandForce controllers with the 510 and 520, respectively, but those two were consumer-oriented drives. For the enterprise, Intel filled this same gap with the 910 Series - a PCIe LSI Falcon SAS RAID controller driving 2 or 4 6Gb/sec SAS Hitachi Ultrastar SSDs. Finally (and most recently), Intel introduced their own SATA 6Gb/sec controller in the form of the DC S3500 and DC S3700. Both are essentially the same 8-channel controller driving 20nm or 25nm IMFT flash, respectively.
More to follow on the next page, where we dive into the guts of each unit.