Author:
Subject: Storage, Mobile
Manufacturer: Corsair

500GB on the go

Corsair seems to have its fingers in just about everything these days so why not mobile storage, right?  The Voyager Air a multi-function device that Corsair calls as "portable wireless drive, home network drive, USB drive, and wireless hub."  This battery powered device is meant to act as a mobile hard drive for users that need more storage on the go including PCs and Macs as well as iOS and Android users. 

The Voyager Air can also act as a basic home NAS device with a Gigabit Ethernet connection on board for all the computers on your local network. And if you happen to have DLNA ready Blu-ray players or TVs nearby, they can access the video and audio stored on the Voyager Air as well.

IMG_9838_0.JPG

Available in either red or black, with 500GB and 1TB capacities, the Voyager Air is slim and sleek, meant to be seen not hidden in a closet. 

IMG_9836_0.JPG

The front holds the power switch and WiFi on/off switch as well as back-lit icons to check for power, battery life and connection status. 

IMG_9835_0.JPG

Continue reading our review of the Corsair Voyager Air 500GB Wireless USB 3.0 HDD!!

Sometime a boxy design is a bonus; Corsair's Carbide Series AIR 540

Subject: Cases and Cooling | July 9, 2013 - 07:21 PM |
Tagged: corsair, Carbide Series AIR 540

It may not look like it at first glance but Corsair's AIR 540 can fit an EATX motherboard inside, it can also fit a mATX board but that might look a little odd inside a case this large.  The extra depth that is obvious in the picture serves two purposes, firstly to create two chambers as the PSU is installed beside the add in card bays, not below or above and secondly to ensure even the tallest CPU cooler can be installed with plenty of spare room around it.  The intake filters are completely removable and it is quite easy to do so, a theme carried on throughout this chassis.  Take a look at the full review at [H]ard|OCP.

H_air540.jpg

"Corsair is adding a somewhat nonconformist computer case design to its product stack with the AIR 540. Its product features tout better cooling, easier adaptation of high end air and water cooling, all while being a quieter solution. The AIR 540 looks to be a simple cube shape, but inside it holds an uncommon dual chamber design."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Podcast #258 - Corsair 900D, HD 7790 vs GTX 650Ti BOOST, Leaked AMD APUs and more!

Subject: General Tech | July 4, 2013 - 12:45 AM |
Tagged: podcast, video, corsair, 900D, 7790, 650ti boost, amd, Richland, nvidia, kepler, titan, Intel, ssd

PC Perspective Podcast #258 - 07/04/2013

Join us this week as we discuss the Corsair 900D, HD 7790 vs GTX 650Ti BOOST, Leaked AMD APUs and more!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Ryan Shrout, Josh Walrath, Jeremy Hellstrom and Allyn Malventano

Program length: 1:14:23

  1. Week in Review:
  2. News items of interest:
  3. 0:58:25 Hardware/Software Picks of the Week:
    1. Allyn: USB Practical Meter (kickstarter)
  4. 1-888-38-PCPER or podcast@pcper.com
  5. Closing/outro

 

Author:
Manufacturer: Corsair

You need some extra space? We got that.

Corsair likes to make cases, I think we know that much for sure by now.  I mean, they have designed something on the order of 13 different chassis, not including color variations.  The very first case Corsair shipped was the Obsidian 800D and at the time it was massive, just down right big. 

Today though we are doing a preview of an even bigger case: the Obsidian 900D.  Seriously, the Obsidian 350D can nearly fit inside the primary bay of this case...

Measuring 27 inches tall, 25 inches deep and more than 10 inches wide, the 900D will dominate just about any landscape you put it on, including a desk as you can tell in the video above.

IMG_0173.JPG

It's height and depth give the 900D space for more processing and cooling components than you will likely ever really need to use, unless you're one of those few crazies out there.  I mean, just looking in the window below you'll see we have a standard ATX motherboard installed and it is just dwarfed.

Continue reading for some more photos of the Corsair Obsidian 900D Case!!

High speed DIMMs for Haswell, Corsair's Vengeance Pro series

Subject: Memory | June 27, 2013 - 07:44 PM |
Tagged: corsair, Corsair Vengeance, Corsair Vengeance Pro, DDR3-2400

Hot on the heels of Haswell comes high speed DIMMs from most manufacturers in much greater quantity than previously available.  For instance the Corsair Vengeance Pro 16GB 2400C10 Memory Kit, a pair of 8GB DIMMs with timings of 10-12-12-31 at stock and part of a family of RAM that runs from 8GB to 32GB and is available in speeds of up to 2933MHz.  MadShrimps just reviewed these DIMMs and while they didn't have much luck overclocking them they were more than satisfied with the stability at stock speeds.

MS_IMG_8212.jpg

"CORSAIR just recently launched their brand new Vengeance Pro series kits. These are designed to set new levels in value and overclocking. With a new stylish and aggressive looking heat spreader design, available in four different flavors: Blue, Gold Red and Silver color. The current products range up from 8GB to a whopping 64GB kit. The rated speeds start of at 1600MHz up to 2933MHz for the flagship version; especially the high end versions are being optimized for Intel's 4th generation Haswell processors. At Computex 2013, CORSAIR already showed higher specced versions, though if these will ever hit the shelves remains a big question. The today's reviewed Vengeance Pro kit is one of the more enthusiast targeted kits, comprising out of two 8GB 2400MHz Cas 10 DIMMs, with a red accent finish."

Here are some more Memory articles from around the web:

Memory

Source: MadShrimps

7 way PSU showdown; 550-600W weight class

Subject: Cases and Cooling | June 24, 2013 - 06:40 PM |
Tagged: TR2, thermaltake, seasonic, PowerX, in win, GS600, G Series, Dark Power Pro 10, CX600M, Cougar, corsair, Commander III, be quiet!

There is a roundup over at Legit Reviews, with seven 550-600W PSUs of which only two models will cost you more than $100.  They are a mix of 80 PLUS Bronze and Gold, some are partially modular others non-modular and of course, they offer differing power quality and acoustic performance.  In this case the most expensive PSU also came out as the winner, but pay attention to the PSU in second place which costs half as much as the Dark Power Pro 10.

LR_43.JPG

"It is natural for an enthusiast to be dazzled by monsters such as the Corsair AX1200i and the Cooler Master Silent Pro M2 1500W; however, even the majority of the enthusiasts would not actually purchase such a beast. It is (or should be) common knowledge that even a very good gaming system does not demand more than 300W-350W and thus, as power supplies are being designed to optimally perform at about 50% capacity, 550W-600W units are plenty for the vast majority of gamers and common users. It is only with multiple video cards, large raid arrays and other “specialized” designs that power requirements may increase substantially. Knowing that and realizing the need to offer our readers insight on products which truly are of interest to them, today we bring you a roundup review of seven quality 550W-600W power supplies..."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Quickly say LAMD Amber controller 3 times ... or read this Neutron GTX reivew

Subject: Storage | June 20, 2013 - 07:40 PM |
Tagged: LAMD Amber, corsair, neutron gtx

Corsair's Neutron GTX has 240GB of 19nm MLC NAND with a LAMD Amber controller, similar to the previous model but with process shrunk RAM.  Write speeds do suffer from the new flash, but that will only be noticeable during large file transfers not during normal usage scenarios.  On the other hand [H]ard|OCP noticed many performance increases which were due to the LAMD Amber controller and netted this drive a Silver award.  The SSD market is very large, with many makes and models available; this drive is worth putting on your short list.

netronH.jpg

"Corsair moves to a smaller 19nm Toshiba Toggle MLC NAND with its LAMD-controlled Neutron GTX Series of SSDs. This shrink comes amongst stiff competition from other manufacturers, and a new SSD that is very similar to the Neutron GTX. Today we see how the new GTX stacks up against its increased competition."

Here are some more Storage reviews from around the web:

Storage

Source: [H]ard|OCP

Corsair Adding Gold Vengeance Pro DDR3 Modules To Lineup

Subject: Memory | June 4, 2013 - 10:15 PM |
Tagged: vengeance pro, ddr3, corsair, computex 2013, computex

PC Perspective motherboard reviewer Morry Teitelman posted a review of Corsair's latest Vengeance Pro DDR3 modules yesterday, and the memory did well enough in his testing to earn a PC Perspective Editor's Choice award. The 16GB DDR3-1866MHz Vengeance Pro DIMMS he reviewed are available now for $144. 8GB Vengeance Pro 1866MHz kits are around $80, and 32GB DDR3-1866  memory kits are $295. There are also other SKUs with even higher clockspeeds for bit more money. On the other hand, going with the 1600MHz kits that are available will save you about $20 versus 1866MHz if you will be using these in a systerm where you don't plan to overclock much (if at all). 

In addition to the blue, red, and silver colored Vengeance Pro kits mentioned in our review, Corsair is also making an additional gold colored SKU available. Note that the underlying memory hardware is not changing, just the aesthetics. The gold version was just added into the mix today, so while current reviews may not note a black and gold module option, one is coming.

Corsair Vengeance Pro DDR3 4 DIMMS.png

The new black and gold Vengeance Pro DDR3 DIMMs.

Therefore, if you were waiting for the Vengeance Pro to go on sale, but wishing that it better matched your gold-laden ECS or ASUS Gryphon motherboard, it might be worth holding off until the gold SKU hits the market (which should be very soon).

Also in Corsair news, the company teased an 8GB Vengeance Pro DDR3 memory kit clocked at an impressive 3200MHz (CAS11, 11-14-14-36 timings) at Computex for Haswell-based machines, but it is unclear exactly when this particular 2x4GB kit will be available.

The full press release is available below for reference.

Also read:

Source: Corsair

Computex 2013: Corsair Adds New Gaming Peripherals To Its Vengeance and Raptor Brands

Subject: General Tech | June 3, 2013 - 09:09 PM |
Tagged: Vengeance K70, vengeance, raptor, corsair, computex 2013, computex

In addition to its new mid tower cases, Corsair is launching four new mechanical keyboards and two new gaming mice to the Vengeance and Raptor gaming lineups. The new gear includes Vengeance K70, Vengeance K65, and Raptor K50 gaming keyboards and the Raptor M40 and M30 mice. All of the new gaming hardware will be available later this summer.

Corsair Vengeance K70

Earlier this year, Corsair released a new K70 mechanical gaming keyboard using Cherry MX Red switches to complement its existing K60 and K90 keyboards (which Scott reviewed last year). At Computex, Corsair announced two new models that use different Cherry MX switches. Instead of the reds, the new models will use either Cherry MX Brown or Cherry MX Blue switches.

K70_GM_US.png

The K70 features a gun-metal anodized aluminum case with adjustable blue backlighting on a key-by-key basis. The keyboard features an anti-ghosting matrix with full key rollover and a 1000Hz polling rate. It will be available for purchase in July with a MSRP of $129.99.

Corsair Vengeance K65

The Vengeance K65 is a new, more compact, mechanical keyboard that utilizes Cherry MX Red switches. It has a full-size key layout, but the palm rest and extra horizontal space has been cut down to enable the K65 to fit on smaller desks. It retains the anti-ghosting, full key rollover and 1000Hz polling rate of the K70 mechanical keyboard along with a brushed metal aesthetic.

K65_B.jpg

This mechanical gaming keyboard will be available in July for $89.99.

Corsair Raptor K50

Whie Corsair's previous keyboard products ahve been mechanical in nature, the new Raptor K50 uses membrane keys rather than the more expensive mechanical variety. In keeping with the gaming nature, the Raptor K50 features 18 programmable keys with 3 banks allowing for up to 54 total macros. It also has a Windows lock key that prevents accidental presses of the Windows key from interrupting your game session as well as six multimedia playback control keys.

K50_top_G.png

Additionally, the Raptor K50 has customizable backlighting that can be adjusted to any number of RGB colors. It supports full key rollover and will be for sale starting in July for $99.99.

Corsair Raptor M40

Corsair is also releasing two new gaming mice to complement the new gaming keyboards. The Raptor M40 is a right-handed optical mouse with seven programmable buttons. It features adjustable weight, an Avago ADNS-3090 4000 DPI optical sensor, and DPI switching buttons.

M40c.jpg

The new gaming mouse will be available later this month for $59.99.

Corsair Raptor M30

Finally, Corsair is also launching a low-cost gaming mouse called the Raptor M30. This mouse is a less complex design, but it still packs a 4000 DPI optical sensor, six buttons, DPI switching, and red LEDs. It ergonomically favors right handed gamers.

M30d.jpg

The Raptor M30 will go on sale sometime this month for $49.99.

Corsair is taking full advantage of Computex to launch new products, with new gaming peripherals, cases, and memory coming out of Day 1 of the show! You can read more about the company's other product releases in the articles below.

Stay tuned to PC Perspective for more information as it develops!

Also read:

Source: Corsair

Computex 2013: Corsair Launches Carbide Air 540 and 330R Mid Tower Cases

Subject: Cases and Cooling | June 3, 2013 - 09:08 PM |
Tagged: corsair, computex 2013, computex, carbide air 540, carbide 330r

Corsair is in attendance at Computex 2013 in Taipei, Taiwan this week to show off a number of new products. The latest product announcement is the release and availability of two new Carbide-series cases: the Carbide Air 540 and Carbide 330R.

Corsair Carbide Air 540 Mid Tower Chassis

The Corsair Carbide Air 540 is a dual chamber mid-tower ATX case that is optimized for maximum air cooling performance. The outside of the case is a boxy brushed aluminum affair with a stylized mesh grill running from the top panel to the front panel. The front panel IO ports sit below the two vertically-mounted 5.25” drives, and includes two USB 3.0 ports, two audio jacks, and power/reset buttons.

AIR540_back.png

The case is split up into two chambers and uses the company's “Direct Airflow Path” techniques. The main (left) chamber hosts motherboards up to E-ATX in size along with PCI-E cards and two hot-swap 3.5” (2.5” drive compatible) drive bays. The second (right) chamber holds the ATX power supply, 5.25” drives, and SSD drive bay (which can hold up to four SSDs). The motherboard tray separates the two chambers, but Corsair has added a number of rubber cable routing grommets to aid in cable management and connecting devices  in the main chamber to power.

AIR540_hero_down.png

A magnetic (removable) front filter protects the case from dust. Cooling options include up to six 120mm or five 1400mm fans. Water cooling enthusiasts can instead opt for up to a 240 or 280mm radiator on top and a 360mm radiator in the front of the case.

In all, the case measures 16.5” x 17” x 18” (407 x 432 x 457mm). It is available now with a MSRP of $139.99.

Corsair Carbide 330R Mid Tower Case

The other case that Corsair is launching today is the Carbide 330R. This case focuses on quiet operation and utilizes Direct Airflow Path techniques and sound dampening material throughout.

The Carbide 330R is a compact mid tower case clad in brushed aluminum with tapered edges and sharp corners. The front panel has a brushed aluminum front door, two USB 3.0 ports, two audio jacks, and power and reset buttons. Corsair is optimizing this case for low-noise operation by adding sound dampening material on the top, side, and front panels as well as using rubber case feet to reduce noise caused by vibration.

330R_hero_down.png

The Carbide 330R supports motherboards up to E-ATX in size, ATX power supplies, four 3.5” (or 2.5”) drives (in tool free trays), and a single 5.25” tool-less drive bay.
Cooling options include:

  • 2 x 120mm or 140mm front panel mounts
  • 2 x 120mm or 140mm top panel fan mounts
  • 1 x 120mm rear fan mount

Users can remove the top panel cover to reveal the two 140mm fan mounts to add a 240mm watercooling radiator though you do lose out on some of the sound dampening potential when you remove that top panel.

The Carbide 330R measures 19.5” x 8.3” x 19” (495 x 210 x 482mm). It is available now with a MSRP of $89.99.

Source: Corsair