Subject: Cases and Cooling | January 7, 2014 - 11:35 PM | Morry Teitelman
Tagged: water cooling, Intel, Glacer 360L, cooler master, CES 2014, CES, amd
Courtesy of Cooler Master
The Glacer 360L CPU cooler is the latest all-in-one cooler from Cooler Master. With a 3x120mm radiator and the ability to add new components into the existing cooling loop, this cooler is sure to make a splash.
Courtesy of Cooler Master
Courtesy of Cooler Master
The Glacer 360L CPU Cooler builds on the design of Cooler Master's previous generation all-in-one cooler, the Glacer 240L, with enhanced cooling surface area and the promise of expandability. This all-in-one cooler features a copper and brass based 3x120mm radiator and a powerful 3500 RPM pump, integrated into the CPU block housing. The CPU block itself is copper based to ensure the best heat transfer capabilities and minimize galvanic corrosion with the radiator. Additionally, Cooler Master has designed the Glacer 360L to be upgradeable, allowing for user addition of other cooling apparatus to the loop.
Cooler Master has not yet released pricing information or retail availability information for the Glacer 360L CPU cooler at this time. Please go here for additional information.
Follow all of our coverage of the show at http://pcper.com/ces!
Subject: General Tech, Cases and Cooling | October 21, 2013 - 01:39 AM | Tim Verry
Tagged: c7, modular psu, gm series, cooler master, 80 Plus Bronze
Cooler Master has launched a new series of power supplies aimed at gamers. The new Cooler Master GM Series is a line of 80 PLUS Bronze rated semi-modular PSUs that come in 450W, 550W, 650W, and 750W models.
The GM series feature a semi-modular design with a permanently attached ATX and CPU cable paired with modular ports for attaching the flat ribbon power cables with SATA, Molex, and PCI-E power connectors. The power supplies have a single 120mm cooling fan and a 3D circuit board that eliminates some internal cabling and improves cooling as a result (according to Cooler Master). The 80+ Bronze PSUs have a single 12V rail design that can deliver up to 62 amps on the 12V rail. They are also compatible with Haswell’s C6 and C7 sleep states.
The G750M, which is the 750W PSU, has the following connectors:
- 1 x 24 pin ATX
- 1 x 4+4 pin CPU
- 4 x 6+2 pin PCI-E
- 8 x SATA
- 6 x Molex
- 1 x Floppy power
More information on the new GM series can be found on the Cooler Master website. As is usually the case with product launches, exact pricing and availability in the US is still unknown.
Subject: General Tech | September 5, 2013 - 01:18 PM | Ken Addison
Tagged: xbox one, x79, WD Red, WD, video, podcast, Ivy Bridge-E, haf stacker, cooler master, 4960x
PC Perspective Podcast #267 - 09/05/2013
Join us this week as we discuss the Ivy Bridge-E i7-4960x, 4TB and Laptop WD Red drives, AMD's Processor Shift and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store
- RSS - Subscribe through your regular RSS reader
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Jeremy Hellstrom, Josh Walrath, and Allyn Malventano
Program length: 1:19:40
Week in Review:
News items of interest:
Hardware/Software Picks of the Week:
1-888-38-PCPER or firstname.lastname@example.org
Subject: General Tech | August 31, 2013 - 11:42 PM | Tim Verry
Tagged: stackable, mini ITX, haf stacker, HAF, full tower, cooler master
Cooler Master recently took the wraps off of its new HAF Stacker series which the company has been teasing for a few weeks now. The new series of computer cases was unveiled at PAX Prime 2013 and is currently on display at booth number 3446 in Seattle, WA.
The new Cooler Master HAF Stacker series includes the full tower HAF 925, and the Mini-ITX HAF 915R and HAF 915F cases. Cooler Master also offers the HAF 935 which includes two cases stacked: the full tower HAF 925 and Mini-ITX HAF 915R. Currently, it appears as though users will not be able to buy the full tower HAF 925 itself. I have reached out to Cooler Master for comment and will update the article if the company responds.
Users can use the HAF Stacker series cases as standalone cases or in a stacked configuration. The various cases are able to stack on top of each other using a patent-pending Cooler Master designed rail system that is reportedly inspired by military picatinny rails. Cooler Master stated in the press release that the cases securely connect in a simple two step process.
The Cooler Master HAF 925 is a full tower case with three optical drive bays, six 3.5” hard drives, a mesh front panel, bottom mounted PSU, eight PCI slots, a large 140mm exhaust fan below three water cooling grommets, and a large side panel window with fan. Front IO includes two USB 3.0, two USB 2.0, and two audio jacks.
Interestingly, the HAF Stacker cases, including the 925 have rubber grommets in the floor and top of the case to allow users to pass cables and/or water cooling tubes to the other stacked cases. This should allow for some fun compartmentalization and water cooling options!
The Mini ITX HAF Stacker 915R and HAF STacker 915F are variants of the same case and have the power supply mounted in either the front or rear of the case respectively. It is similar in design to the full tower HAF 925 but smaller. It has a mesh front panel, a single 5.25” drive, two USB 3.0 ports and two audio jacks on the front panel, and two PCI slots. There are large vents on the side panel to allow for a water cooling radiator or 120mm fans. The small Mini ITX cases can be stacked on top of or below the other HAF Stacker cases.
Cooler Master has stated that the entire HAF Stacker chassis series will be available in Q4 of this year with pricing that will “vary by region.” You can follow the progress of the cases and get more information on this Cooler Master micro-site.
The press release from Cooler Master is included after the break.
Subject: Cases and Cooling | August 29, 2013 - 09:21 PM | Tim Verry
Tagged: mini ITX, htpc, elite 130, cooler master
Cooler Master recently released the Elite 130 Mini ITX case, which is an update to the existing Elite 120. The Elite 130 measures 9.4” x 8.1” x 14.9” (240mm x 205mm x 377.5mm) and will be available for under $50.
The Elite 130 weighs 6.8 pounds and is constructed of a steel alloy body with a polymer mesh front panel. The all black chassis has a mesh front panel with IO on the left and a single 5.25” drive bay. There is an 80mm vent on the right panel and a vent (without a fan) on the left side panel. The rear of the case features two PCI slots and a single rubber grommet for water cooling or USB 3.0 pass through cables. The case supports standard ATX power supplies through the use of an extension bracket. The PSU sticks out slightly from the back of the case and a vent on the case’s top panel allows for the power supply to pull in cool air from the outside rather than from the case internals.
Front IO on the Cooler Master Elite 130 includes two USB 3.0 ports and two audio jacks.
Internally, the Elite 130 supports a single 5.25” drive, two 3.5” hard drives, and a single solid state drive mounted in a side bracket. Alternatively, users can forgo an optical drive in favor of having three total 3.5” drives or four total 2.5” drives.
The case comes pre-installed with a 120mm intake fan and users can add a single 80x15mm fan on the right side panel. Users can swap out the front intake fan for water cooling radiator.
The Elite 130 supports Mini ITX motherboards, graphics cards up to 13.5,” CPU coolers up to 2.5” tall, and power supplies up to 180mm long.
Subject: Cases and Cooling | August 24, 2013 - 02:17 PM | Tim Verry
Tagged: mid-tower, gamescom, cosmos se, cosmos, cooler master, aluminum
At GamesCom in Germany earlier this week, Cooler Master showed off an updated mid-tower version of its Cosmos S: the Cosmos SE. This new case was on display at the company's GamesCom booth and is an aluminum mid-tower clad in all black. The Cosmos SE shares a similar outward appearance and form factor to the existing (full tower) Cosmos S, except it is shorter and features a redesigned front bezel. The side panel window shape is the same on the two Cosmos S-series cases. The new Cosmos SE does keep the solid aluminum handles and raised legs, however. The front IO is located above the 5.25" bays on the top edge of the case and includes two USB 3.0, two USB 2.0, and two audio jacks.
Internally, the case can accommodate ATX motherboards, three 5.25" drives, and at least five 3.5" or 2.5" hard drives or SSDs. A bottom mounted power supply sits below the motherboard, but with enough room for two dual slot graphics cards.
As far as cooling, the Cosmos SE can fit a 240mm radiator on the top of the case and a 360mm radiator with the front hard drive bays removed. Cable management has reportedly been tweaked as well.
The case looks nice but the ability to mount a 360mm rad (even at the cost of removing the 5.25" bays) to the top of the case would have been a welcome feature.
Unfortunately, beyond the photos coming out of GamesCom, details on the new case are scarce. Pricing and availability in particular are still unknown.
Are you excited for the Cosmos SE?
Subject: Mobile | August 8, 2013 - 03:50 PM | Jeremy Hellstrom
Tagged: CM Storm SF-17, cooler master, laptop cooler
If you have a high powered gaming notebook you have probably learned not to put it directly on your lap while gaming. This somewhat limits the comfortable positions that you can use the notebook in and in some cases requires you to prop the notebook in an awkward position to ensure you don't overheat the machine. The new CM Storm SF-17 is a smart alternative to roasting your expensive machine with a 180mm fan to move hot air away from your machine. Check out what Overclockers Club thought of this notebook cooler in their full review.
"Cooler Master did a good job with the CM Storm SF-17 Gaming Notebook Cooler. Great build quality and looks that will definitely appeal to the those that like a rugged style make this cooler very unique. The fan speed control is a welcome feature that will enable users to bring down the generated noise to acceptable levels. And the four height adjustment settings provide some flexibility depending on your typing style. The anti-slip material used on this cooler is simply great; even at the highest setting the laptop did not move the slightest. Finally, the cable management integration is more efficient than what was available on other laptop coolers."
Here are some more Mobile articles from around the web:
- Acer Aspire S7 (2013) Review @ TechReviewSource
- Competition for the Microsoft Surface Pro: Acer Aspire P3, Lenovo Yoga 11s and Toshiba WT310 @ Hardware.info
- ASUS ROG G750 Budget Gaming Laptop @ TechwareLabs
- Toshiba Qosmio X75 Review @ TechReviewSource
- Apple AirPort Extreme and Time Capsule review: 802.11ac according to Apple @ Hardware.info
- EagleTech Neptor NP056K 5600mAh Battery Pack Review @ HiTech Legion
- Cooler Master Comforter Mini Review @ OCC
- ASUS MeMO Pad HD7 Review: $149 Nexus 7.1 Successor & Our First Look at MediaTek's MT8125 @ AnandTech
- Google Nexus 7 2nd Generation Tablet Review @ Legit Reviews
- Google Nexus 7 Review @ TechReviewSource
- Samsung Galaxy S4 Mini @ The Inquirer
- Samsung Galaxy S4 Smartphone Review @ Hardware Canucks
- Samsung Galaxy S4 Zoom @ The Inquirer
- Gigabyte GSmart Maya M1 v2 Quad Mobile Phone Review @ Madshrimps
- Nokia Lumia 925 Review: Windows Phone at its best, but is it enough @ TechSpot
Subject: General Tech | August 6, 2013 - 02:34 PM | Jeremy Hellstrom
Tagged: input, cooler master, quickfire xt, Cherry MX
The Cooler Master QuickFire XT comes in four different flavours of Cherry, Blue, Red, Brown and Green. You can pick your preferred type of mechanical switch, from low resistance to strong as well as a click or a non-click feedback for a keypress. It can also function either as USB or PS/2 for those who like to push more than a half dozen buttons at once and looks very familiar, lacking the sometimes ridiculous amount of extra media buttons. You can easily swap keys around for those who prefer bright red WSAD or who want to incorporate the two unique CM buttons. Legit Reviews has the full story here.
"As expected with mechanical keyboards, typing on the QuickFire XT was an overwhelmingly positive experience as a result of Cherry’s switch mechanism. Individuals have their own preferences and so it’s not fair to rate or rank the switch types. Cooler Master avoids the issue of forced switch selection by making the QuickFire XT available in four Cherry MX switches..."
Here is some more Tech News from around the web:
- CM Storm QuickFire XT Keyboard Review @ Hardware Secrets
- CM Storm QuickFire XT Mechanical Keyboard Review @ Techgage
- Corsair K95 Mechanical Keyboard @ eTeknix
- MSI GK-601 Mechanical Gaming Keyboard @ Benchmark Reviews
- ROCCAT Isku FX @ DV Hardware
- SteelSeries APEX Gaming Keyboard @ NikKTech
- Rosewill Helios RK-9200 Mechanical Keyboard Review @ TechwareLabs
- ZOWIE G-TF Rough mousepad @ DV Hardware
- CMStorm Havoc Professional Gaming Mouse @ eTeknix
- Logitech G700s @ LanOC Reviews
- Gigabyte Aivia Neon Touch-Charge Air Presenter Mouse
- Leetgion Hellion @ Legion Hardware
- Cooler Master Havoc Gaming Laser Mouse @ Funky Kit
- ROCCAT Kone Pure Color Gaming Mouse Review @ Madshrimps
- Steelseries Sensei [RAW] Rubber Surface Edition Ambidextrous Mouse @ eTeknix
Introduction and Technical Specifications
Courtesy of Cooler Master
The HAF XB mid tower case is the newest member of the Cooler Master HAF line of cases. Touted as a LAN box, this cube-shaped case has both looks and features that appeal to any enthusiasts. We decided to put the HAF XB on our test bench to validate these claims. At a base price of $99.99, the HAF XB is a bargain for the features you are getting.
Courtesy of Cooler Master
Courtesy of Cooler Master
Cooler Master designed the HAF XB with a scratch-resistance, flat-black colored coating applied to all surfaces. Both side panels have integrated hand-holds for easy lifting and transport to your event and the front and top panels contain non-impeding mesh grills allowing for optimal airflow across your vital system components. Integrated into the case's front panel are power and reset buttons, power indicator LEDs, audio input and output port, USB 3.0 device ports, two 5.25" device bays, and two hot-swappable hard drive bays.
Subject: Cases and Cooling | July 30, 2013 - 08:26 AM | Tim Verry
Tagged: cooler master, cm 690 III, atx
Cooler Master has announced the CM 690 III, which is a redesigned full tower case in the same enthusiast vein as the original CM 690. Cooler Master has primarily redesigned the interior with a new hard drive mounting cage, tool-less drive bays, and additional cable management space behind the motherboard tray.
The new Cooler Master CM 690 III measures 507mm x 230mm x 502mm (HxWxD) and weighs approximately 19 lbs (8.7kg). The case is all black with mesh front and top panels. The top of the case has a small storage compartment and front panel IO options including two USB 3.0, two USB 2.0, and two audio jacks. The front of the case has three externally-accessible 5.25” bays and space for a 200mm intake fan.
The CM 690 III comes in two SKUs, depending on whether you want a side panel case window or not. The model with a side window supports up to 7 fans while the model without a window supports up to 9 fans, and up to three 200mm fans. Also, cooling support further includes grommets on the rear of the case for external radiators, support for a 240mm water cooling radiator on both the top and front panel, and a 120mm raditor on the rear. Dust filters are located on the top, front, and PSU vents.
The CM 690 III supports graphics cards up to 423mm long and CPU coolers up to 171mm high. Users can install up to 7 3.5” hard drives or up to 10 2.5” SSDs (one behind the motherboard and one on the bottom of the case).
The updated CM 690 III will be available in August for an undisclosed price.