Subject: Cases and Cooling | June 6, 2016 - 12:03 PM | Sebastian Peak
Tagged: SX800-LTI, small form-factor, Silverstone, SFX-L, SFX, SFF, PSU, power supply, computex 2016, computex, 80 Plus Titanium
SilverStone introduced a 700W SFX-L power supply at CES in January, and with that SX700-LPT PSU now officially released the company has raised the bar again as no less than 800W is coming to the SFX-L form-factor.
Image credit: TechPowerUp
SilverStone's SX800-LTI not only offers a massive 800W, but does so with an 80 PLUS Titanium certification (!). The power supply pushes this massive wattage along a single +12V rail, and the SX800-LTI features a fully-modular design for a clean build. An added benefit to the SFX-L form-factor, other than the potential for these powerful designs, is the use of a 120 mm fan, which allows for much quieter operation under load compared to the smaller SFX variant.
Image credit: TechPowerUp
We are now approaching full ATX power with these SFX-L PSUs, and indeed the 800-850W range should be all most users would need for even a dual-GPU system (especially as we enter the era of 14-16nm GPUs with their lower power requirements).
No word yet on price or availability.
Subject: Cases and Cooling | June 2, 2016 - 02:34 AM | Sebastian Peak
Tagged: water cooler, Silent Series, liquid cooler, cpu cooler, computex 2016, computex, be quiet!, AIO
More be quiet! news from Computex as the company has introduced their first all-in-one liquid CPU coolers with the Silent Loop series; “silence-optimized” liquid coolers ranging from 120mm - 280mm.
Here are some of the features from be quiet!:
- Newly designed reverse-flow pump for virtually inaudible operation
- No vibrating noise
- Very quiet Pure Wings 2 PWM fans
- High performance full copper radiator
- Compact and flat pump design
- Refill port
- 3-year warranty
The Silent Loop coolers are available in three sizes; 120 mm, 240 mm, and 280 mm.
Here’s the preliminary cost breakdown (prices are not yet final according to be quiet!):
120mm / MSRP: $109.99
240mm / MSRP: $129.90
280mm / MSRP: $149.90
The Silent Loop liquid coolers are slated for a September 2016 launch.
Subject: Cases and Cooling | June 1, 2016 - 03:38 PM | Sebastian Peak
Tagged: enclosure, Dark Base 900 Pro, Dark Base 900, computex 2016, computex, case, be quiet!, atx case
A pair of enclosures from be quiet! have been announced, with the Dark Base 900 and Dark Base 900 PRO, and both models offer modular construction for greater build flexibility.
Here are some of the specs and features from be quiet!:
- High flexibility through high modularity
- Modular motherboard tray can invert and also slide vertically to make space for radiators, etc.
- Motherboard tray is decoupled to avoid vibrations
- Removable motherboard tray can be used as a test bench, or install system completely outside the case first
- Separated HDD cages for maximum flexibility - each holds one 3.5” or two 2.5” drives
- Removable ODD cage
- Standard storage support: 2x ODD / 7x HDD / 15x SSD
- Highest compatibility to water cooling
- PWM fan control
- 3x SilentWings 3 PWM 140mm fans pre-installed
- Aluminum finish on top and front
- 4mm tempered glass side panel
- LED strips with 5 colors
- QI charger for mobile devices
The system looks spacious, and offers removable cages for storage drives:
The motherboard tray is removable, and it can also be inverted if desired for an alternate internal layout:
And what premium enclosure would be complete without LED lighting? The PRO version of the Dark Base offers LED strips with your choice of 5 colors:
The Dark Base 900 has an MSRP of $199, and the Dark Base 900 PRO is $249, with availability set for June 28.
Subject: Processors | June 1, 2016 - 03:57 AM | Scott Michaud
Tagged: Zen, computex 2016, computex, amd
At the end of the AMD Computex 2016 keynote, Lisa Su, President and CEO of the company, announced a few details about their upcoming Zen architecture. This will mark the end of the Bulldozer line of architectures that attempted to save die area by designing cores in pairs, eliminating what AMD projected to be redundancies as the world moved toward multi-core and GPU compute. Zen “starts from scratch” and targets where they now see desktop, server, laptop, and embedded devices heading.
They didn't really show a whole lot at the keynote. They presented an animation that was created and rendered on the new architecture. I mean, okay, but that's kind-of like reviewing a keyboard by saying that you used it to type the review. It's cool that you have sample silicon available to use internally, but we understand that it physically works.
That said, Lisa Su did say some hard numbers, which should be interesting for our readers. AMD claims that Zen has 40% higher IPC from their previous generation (which we assume is Excavator). It will be available for desktop with eight cores, two threads per core, on their new AM4 platform. It also taped out earlier this year, with wide sampling in Q3.
I'm curious how it will end up. The high-end CPU market is a bit... ripe for the picking these days. If AMD gets close to Intel in performance, and offers competitive prices and features alongside it, then it would make sense for enthusiast builds. We'll need to wait for benchmarks, but there seems to be low-hanging fruit.
AMD gets aggressive
At its Computex 2016 press conference in Taipei today, AMD has announced the branding and pricing, along with basic specifications, for one of its upcoming Polaris GPUs shipping later this June. The Radeon RX 480, based on Polaris 10, will cost just $199 and will offer more than 5 TFLOPS of compute capability. This is an incredibly aggressive move obviously aimed at continuing to gain market share at NVIDIA's expense. Details of the product are listed below.
|RX 480||GTX 1070||GTX 980||GTX 970||R9 Fury||R9 Nano||R9 390X||R9 390|
|GPU||Polaris 10||GP104||GM204||GM204||Fiji Pro||Fiji XT||Hawaii XT||Grenada Pro|
|Rated Clock||?||1506 MHz||1126 MHz||1050 MHz||1000 MHz||up to 1000 MHz||1050 MHz||1000 MHz|
|Memory Clock||8000 MHz||8000 MHz||7000 MHz||7000 MHz||500 MHz||500 MHz||6000 MHz||6000 MHz|
|Memory Interface||256-bit||256-bit||256-bit||256-bit||4096-bit (HBM)||4096-bit (HBM)||512-bit||512-bit|
|Memory Bandwidth||256 GB/s||256 GB/s||224 GB/s||196 GB/s||512 GB/s||512 GB/s||384 GB/s||384 GB/s|
|TDP||150 watts||150 watts||165 watts||145 watts||275 watts||175 watts||275 watts||230 watts|
|Peak Compute||> 5.0 TFLOPS||5.7 TFLOPS||4.61 TFLOPS||3.4 TFLOPS||7.20 TFLOPS||8.19 TFLOPS||5.63 TFLOPS||5.12 TFLOPS|
The RX 480 will ship with 36 CUs totaling 2304 stream processors based on the current GCN breakdown of 64 stream processors per CU. AMD didn't list clock speeds and instead is only telling us that the performance offered will exceed 5 TFLOPS of compute; how much is still a mystery and will likely change based on final clocks.
The memory system is powered by a 256-bit GDDR5 memory controller running at 8 Gbps and hitting 256 GB/s of throughput. This is the same resulting memory bandwidth as NVIDIA's new GeForce GTX 1070 graphics card.
AMD also tells us that the TDP of the card is 150 watts, again matching the GTX 1070, though without more accurate performance data it's hard to assume anything about the new architectural efficiency of the Polaris GPUs built on the 14nm Global Foundries process.
Obviously the card will support FreeSync and all of AMD's VR features, in addition to being DP 1.3 and 1.4 ready.
AMD stated that the RX 480 will launch on June 29th.
I know that many of you will want us to start guessing at what performance level the new RX 480 will actually fall, and trust me, I've been trying to figure it out. Based on TFLOPS rating and memory bandwidth alone, it seems possible that the RX 480 could compete with the GTX 1070. But if that were the case, I don't think even AMD is crazy enough to set the price this far below where the GTX 1070 launched, $379.
I would expect the configuration of the GCN architecture to remain mostly unchanged on Polaris, compared to Hawaii, for the same reasons that we saw NVIDIA leave Pascal's basic compute architecture unchanged compared to Maxwell. Moving to the new process node was the primary goal and adding to that with drastic shifts in compute design might overly complicate product development.
In the past, we have observed that AMD's GCN architecture tends to operate slightly less efficiently in terms of rated maximum compute capability versus realized gaming performance, at least compared to Maxwell and now Pascal. With that in mind, the >5 TFLOPS offered by the RX 480 likely lies somewhere between the Radeon R9 390 and R9 390X in realized gaming output. If that is the case, the Radeon RX 480 should have performance somewhere between the GeForce GTX 970 and the GeForce GTX 980.
AMD claims that the RX 480 at $199 is set to offer a "premium VR experience" that has previously be limited to $500 graphics cards (another reference to the original price of the GTX 980 perhaps...). AMD claims this should have a dramatic impact on increasing the TAM (total addressable market) for VR.
In a notable market survey, price was a leading barrier to adoption of VR. The $199 SEP for select Radeon™ RX Series GPUs is an integral part of AMD’s strategy to dramatically accelerate VR adoption and unleash the VR software ecosystem. AMD expects that its aggressive pricing will jumpstart the growth of the addressable market for PC VR and accelerate the rate at which VR headsets drop in price:
- More affordable VR-ready desktops and notebooks
- Making VR accessible to consumers in retail
- Unleashing VR developers on a larger audience
- Reducing the cost of entry to VR
AMD calls this strategy of starting with the mid-range product its "Water Drop" strategy with the goal "at releasing new graphics architectures in high volume segments first to support continued market share growth for Radeon GPUs."
So what do you guys think? Are you impressed with what Polaris looks like its going to be now?
Subject: Mobile | May 30, 2016 - 06:14 PM | Sebastian Peak
Tagged: zenfone 3, snapdragon 820, Snapdragon 625, smartphone, ips, computex 2016, computex, asus, Android, AMOLED
The Zenfone 3 family has been officially announced, and ASUS has provided all of the details of these new Android smartphones from Computex 2016.
The Zenfone 3 family is comprised of three phones; the Zenfone 3, Zenfone 3 Deluxe, and the massive Zenfone 3 Ultra. The first of these is the standard Zenfone 3, which replaces the Zenfone 2 not only in number, but architecture. While the previous version was powered by an Intel SoC, this new Zenfone contains a conventional ARM-based SoC; the Snapdragon 625.
A 5.5-inch device with a FHD (1920x1080) IPS display protected by Gorilla Glass 4, the 7.69 mm thick Zenfone 3 also boasts a 16MP “PixelMaster” camera with OIS and “ultra-fast 0.03s instant focus” for clear photos. Other features include a sizable 4GB of RAM, a “5-magnet” speaker design and 24-bit/192kHz high-resolution audio support, and a 3000 mAh battery. The phone uses USB Type-C connectivity, and arrives with Android 6.0 with ZenUI 3.0.
Moving to the Zenfone 3 Deluxe, this higher-end model offers a slightly larger 5.7” FHD AMOLED display (rather than IPS), and adds Quick Charge 3.0 for the 3000 mAh, and USB 3.0 speed to the Type-C connector. The SoC powering the Deluxe is the biggest upgrade over the standard Zenfone 3, with the powerful Snapdragon 820 replacing the base model’s Snapdragon 625.
If you enjoy a more tablet-like experience, the 6.8-inch (!) Zenfone 3 Ultra might be for you!
While still FHD at this tablet-like size, the rear camera on the Ultra is a big upgrade, with a 23MP PixelMaster Camera (via the Sony IMX318 sensor). The battery is also a big upgrade over the smaller phones, as the larger chassis allows a 4600 mAh capacity. The big question (pun intended) becomes, will people want to use a 6.8-inch smartphone? To which the answer must be, no, we will hold out for the 7+ inch phones! (Or not.)
As to pricing, the Zenfone 3 is nearly as aggressive as the previous version, with an MSRP of $249. The Deluxe version is priced much more like premium handset at $499, and the Ultra is just behind it at $479. Availablity has not been announced.
Subject: Graphics Cards, Motherboards, Systems, Shows and Expos | May 30, 2016 - 12:04 PM | Ryan Shrout
Tagged: crazy people, concept, computex 2016, computex, avalon, asus
If you expected Computex to be bland and stale this year, ASUS has something that is going to change your mind. During the company's Republic of Gamers press conference, it revealed a concept PC design it has been working on dubbed Avalon. The goal of this project was to improve on the fundamental design of the PC; something that hasn't changed for decades. ASUS wanted to show that you could build a platform that would allow DIY machines to be "more modular, easier to build, and more tightly integrated."
The result is a proof of concept design that looks more like a high end turntable than a PC. In reality, you are looking at a machine that has been totally redesigned, from the power supply to motherboard and case integration to cooling considerations and more. ASUS has posted a great story that goes into a lot of detail on Avalon, and it's clear this is a project the team has been working on for some time.
The brainchild of Jonathan Chu, the Avalon concept takes a notebook-like approach to desktop design. The motherboard is designed in conjunction with the chassis to enable more seamless cooperation between the two.
The first example of changes to Avalon is something as simple as the front panel connectors on a case. Connecting them to your motherboard is the same today, basically, as it has ever been. But if you are the manufacturer or designer of both the chassis and the motherboard itself, it is trivial to have the buttons, lights and even additional capabilities built into a specific location on the PCB that matches with access points on the case.
Re-thinking the rear IO panel was another target: making it modular and connected to the system via PCI Express means you can swap connectivity options based on the user's needs. Multiple Gigabit NICs a requirement? Done. Maximum USB capability? Sure. Even better, by making the back panel IO a connected device, it can host storage and sound controllers on its own, allowing for improved audio solutions and flexible data configurations.
ASUS even worked in a prototype power supply that is based on the SFX form factor but that uses a server-style edge connector, removing wires from the equation. It then becomes the motherboard's responsibility to distribute power through the other components; which again is easy to work through if you are designing these things in tandem. Installing or swapping a power supply becomes as simple as pulling out a drive tray.
This is all made possible by an internal structure that looks like this:
Rethinking how a motherboard is built, how it connects to the outside world and to other components, means that ASUS was able to adjust and change just about everything. The only area that remains the same is for the discrete graphics card. These tend to draw too much power to use any kind of edge connector (though the ASUS story linked above says they are working on a solution) and thus you see short run cables from a break out on the motherboard to the standard ROG graphics card.
The ASUS EdgeUp story has some more images and details and I would encourage you to check it out if you find this topic compelling; I know I do. There are no prices, no release dates, no plans for sampling yet. ASUS has built a prototype that is "right on the edge of what’s possible" and they are looking for feedback from the community to see what direction they should go next.
Will the DIY PC in 2020 be a completely different thing than we build today? It seems ASUS is asking the same question.
Subject: Motherboards, Shows and Expos | May 30, 2016 - 11:18 AM | Ryan Shrout
Tagged: ROG, rampage v edition 10, computex 2016, computex, asus
In celebration of 10 years of ASUS ROG motherboards, the company today revealed the new Rampage V Edition 10, an X99 motherboard targeting the release of the Intel Broadwell-E processors that are also set to be announced this week at Computex. This new board has basically every feature and capability an ROG product and buyer could ask for, including more LED and LED control than I know what to do with.
Some more detail from the ASUS press release:
The Rampage V Edition 10 is a celebratory refresh of ROG’s flagship extreme-performance motherboard designed to let gamers and overclockers break every limit.
Based on the Intel® X99 chipset, the new motherboard sets new industry standards. It features the ultimate RGB lighting scheme with five independently-controlled onboard LED areas plus one 4-pin 5050 RGB header, and all can be synchronized by the all-new Aura software for stunning aesthetics. ROG has also teamed up with well-known RGB strip-makers and case manufacturers, including CableMod, IN WIN, Deepcool, BitFenix, and Phanteks — helping simplify RGB lighting compatibility and control.
The new motherboard is equipped with multiple ASUS exclusive features to aid extreme overclockers. These include Extreme Engine Digi+ voltage-regulator module (VRM) for the cleanest, smoothest power, ASUS-exclusive T-topology technology for maxed-out DDR4 performance, and 5-Way Optimization for easy overclocking and fan tuning with one click.
The Rampage V Edition 10 also includes multiple technologies to deliver the best gaming experience. The included SupremeFX Hi-Fi audio amplifier ensures flawless audio, dual Intel Gigabit Ethernet and GameFirst combine forces for low-latency networking, and ASUS Safe Slot reinforcement for PCIe connectors to prevent damage from heavy graphics cards. The new board introduces a patent-pending integrated I/O shield for style, easier construction, and enhanced durability. There’s also a slew of onboard storage and connectivity options, including U.2, M.2, USB 3.1, and 3x3 Wi-Fi.
According to a post on an ASUS sub-site, the board will retail for $599 and should be on the market very soon!
Subject: Displays | May 30, 2016 - 11:12 AM | Ryan Shrout
Tagged: computex, asus, ROG, swift, pg248q
During the company's Republic of Gamers event at Computex 2016, ASUS officially announced the release of the ROG Swift PG248Q monitor. Though we have seen it teased previously, today's information release has some interesting new details.
Based on a 24-inch 1920x1080 TN panel, the PG248Q was specifically built for gamers that desire a smaller display, to avoid being forced to move their head to find a specific target. The idea here is that eSports players, and those aspiring, need to have the entire monitor in their field of view at all times.
The small size and 1080p resolution don't mean the display is devoid of impressive features though. It is a G-Sync monitor, so gamers can enjoy tear-free, smooth gaming with GeForce graphics cards as well as a 180Hz refresh rate! Add to that combination a rated response time of 1ms (grey to grey) and you have an incredibly high performance gaming panel.
The PG248Q will be the official display of some impressive gaming events including the ESL One 2016 and The International 2016, so I expect ASUS to have a ground swell of interest in this model.
No specifics on pricing or availability quite yet, but I've put in the requests accordingly.
Subject: General Tech | May 26, 2016 - 09:53 PM | Allyn Malventano
Tagged: X99P-SLI, toshiba, revodrive, review, RD400, podcast, pcper, ocz, msi, hardware, gigabyte, fdsoi, computex, amd, AM4, am3, am2, 303, 22nm
PC Perspective Podcast #401 - 05/26/2016
Join us this week as we discuss the Gigabyte X99P-SLI, RevoDrive is back, GPU Drivers, Computex, and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store (audio only)
- Google Play - Subscribe to our audio podcast directly through Google Play!
- RSS - Subscribe through your regular RSS reader (audio only)
- MP3 - Direct download link to the MP3 file
Hosts: Allyn Malventano, Jeremy Hellstrom, Josh Walrath, and Sebastian Peak
Week in Review:
News items of interest:
Hardware/Software Picks of the Week
- http://twitter.com/ryanshrout and http://twitter.com/pcper