Subject: Processors | June 6, 2012 - 02:08 PM | Josh Walrath
Tagged: Zacate, Hudson-M3L, FCH, E2-1800, E2-1200, computex, brazos 2.0, brazos, Bobcat, amd
Today AMD is officially releasing their Brazos 2.0 parts. This is a case of good news/bad news for the company. The good news is that they have an updated product that is based on their very successful Brazos 1.0 platform and that particular part has sold over 30 million units and is included in some 160 designs. The bad news is that AMD did not improve the product dramatically over what we previously had.
While Brazos will not beat these Intel offerings in pure performance, they do match up nicely in terms of price and battery life.
It is well known that AMD cancelled their original Bobcat 2.0 28 nm parts last fall (Krishna and Wichita), and instead worked on improving the fabrication of the current Brazos APUs. Little is known as to why those original 28 nm parts were cancelled, but perhaps the overriding reason is that there simply would not be enough 28 nm production through the first three quarters of 2012 to enable AMD to adequately meet demand on these parts (all the while sacrificing higher margin GPU wafer orders on the 28 nm node). We also must consider that AMD could have been counting on GLOBALFOUNDRIES to have their flavor of 28 nm HKMG process up and running, which of course at this time it is not.
These new Brazos 2.0 chips are still manufactured on TSMC’s 40 nm process, but that particular process is very mature at this time. This has allowed AMD and TSMC to squeeze every last drop of performance and efficiency out of the aging 40 nm node, and in so doing has allowed AMD a bit more headroom when it comes to the Zacate APUs that Brazos 2.0 is based off of. The two new processors are the E2-1800 and the E2-1200.
The E2-1800 is a dual core Bobcat CPU featuring an APU with 80 stream units based on the older HD 5000 series of parts. AMD has renamed the GPU to the HD 7340, though it has little in common with the GCN (Graphics Core Next) based HD 7000 graphics units. AMD increased the core CPU speed from the E-450 by 50 MHz and the GPU portion by 80 MHz. This gives the E2-1800 a core clockspeed of 1.7 GHz and the graphics runs at a brisk 680 MHz. This continues to be an 18 watt TDP part and the die size is the same 75 mm squared.
Subject: General Tech | June 6, 2012 - 10:08 AM | Jeremy Hellstrom
Tagged: computex, computex 2012, nvidia, corsair, asrock
The Tech Report have been every bit as busy as Ryan, trying to get in as much of Computex as possible and post the sights to the web. They dropped by Broadcom's booth to see new ARM based SoCs which will be used in the next generation of 802.11ac routers, taking wireless beyond gigabit speeds, with USB 3.0 added on for easy media distribution. They snapped a few pictures of the ASRock motherboards we saw earlier this week, including the dual Thunderbolt Z77 Extreme which features a DisplayPort in port to allow you to use a Thunderbolt display without needing Lucid's Virtu to translate. They also saw Corsair's surprise new SSD controller from Link_A_Media Devices (LAMD), which will provide SATA 6Gbps and can use either ONFI or Toggle DDR NAND. NVIDIA was showing off the new GT 640 which will use a 28nm Kepler chip sport 384 shader ALUs and cost under $100 and should bring a bit more power to low end machines, though don't expect a huge jump from the previous GTS450
Here is some more Tech News from around the web:
- Computex 2012 Day 1 - Hit the floor sleepy @ Ninjalane
- Computex: Zalman prepares T1 chassis for affordable victory @ Kitguru
- SilverStone unveils the Raven RV04 and Fortress FT04 @ Kitguru
- Techies beg world to join the 1% on IPv6 launch day @ The Register
- Trend in mobile computing: Q&A with Intel's Gregory Bryant @ DigiTimes
- Samsung takes a seat with Intel and IBM at the Linux Foundation @ The Inquirer
- Windows Phone 8 launches on 20 June @ The Inquirer
- Ubuntu 12.10 Sets To Make ARM Even Stronger @ Phoronix
Subject: Motherboards | June 5, 2012 - 05:40 PM | Tim Verry
Tagged: X79S-UP5 WiFi, x79, socket 2011, Intel, gigabyte, computex
Although Ivy Bridge is the new hotness, socket 2011 is still the company’s top-end enthusiast and workstation platform. And to to be forgotten, Gigabyte dedicated some space at its Computex booth to show off a new high-end X79 socket 2011 motherboard. The Gigabyte GA-X79S-UP5 WiFi is a EATX motherboard with a 2011 socket that is surrounded by heatpipes and VRM heatsinks (we recently reviewed the X79-UD5) The board further supports eight DDR3 DIMM slots, eight SAS connectors, six SATA ports, four PCI-E 3.0 x16 slots (up to 3 way SLI/CrossFireX), one PCI-E 3.0 x1 slot, and one legacy PCI slot at the bottom of the motherboard. It also has internal connectors for front panel audio, SPDIF, Firewire (1394), TPM, one USB 3.0, two USB 2.0 headers, and four fan headers (one of which is for the CPU).
Integrated Gigabyte technology includes the company’s all-digital and “3D Power,” dual UEFI BIOSes, 8 phase VRM, Gigabyte Bluetooth 4.0 and WiFi card, 110dB SNR (signal-to-noise ration) HD audio, and 3X USB power and On/Off Charge to charge iPads and tablets even when the computer is powered down. Quad channel memory and socket 2011 processors give CAD engineers, video editors, and other 3D modelers the most performance possible out of a single socket workstation system.
Rear IO for the X79S-UP5 WiFi board includes a PS/2 port, four USB 2.0 ports, a firewire port, UEFI BIOS reset and overclock profile buttons, four USB 3.0 ports, two eSATA ports, a USB/eSATA combo port, Gigabit LAN, optical audio output, and five analog audio outputs.
In short, this is a motherboard that Gigabyte has packed to the brim with features for enthusiasts. Below you will find several high-resolution images of the new socket 2011 motherboard. If your internet connection is ready, dive right in!
Gigabyte GA-X79S-UP5 WiFi Motherboard Images
Even considering my bias of my favorite color being blue, the board looks really nice, especially the heatsink designs which really make the board stand out.
CPU socket area:
Here we can see the 2011 socket, VRMs, and DDR3 DIMM slots.
More photos after the break!
Subject: General Tech, Motherboards | June 5, 2012 - 05:04 PM | Tim Verry
Tagged: thunderbolt, motherboard, gigabyte, ga-z77x-up5 th, computex
Intel’s 10Gbps copper-based Thunderbolt technology is big at this year’s Computex show, and Gigabyte was not shy about showing off their Thunderbolt hardware. Not to be outdone by the Intel booth, Gigabyte had on display a Thunderbolt motherboard and no less than 13 pieces of Thunderbolt hardware!
The motherboard in question is Gigabyte’s GA-Z77X-UP5 TH which is an ATX form factor board that supports Intel Ivy Bridge processors, dual UEFI BIOS technology, SLI and CrossFireX multi-GPU setups, four DDR3 DIMM slots, six SATA 6Gbps ports, three PCI-E 3.0 x1 slots, three PCI-E 3.0 x16 slots, and a single legacy PCI slot. It also, of course, features a Thunderbolt port.
The list of Thunderbolt-enabled peripherals was impressive – they only seemed to be missing Thunderbolt docks. The full list of devices is available in the table below, but Gigabyte had the Apple Thunderbolt display, several Thunderbolt external hard drives, a Thunderbolt SSD, Thunderbolt-equipped RAIDed NAS boxes from several vendors, and the active Thunderbolt cables themselves (from Sumitomo Electric).
|Blackmagic design||UltraStudio 3D||Video editing|
|Blackmagic design||Intensity Extreme||Video editing|
|LaCie||eSATA Hub Thunderbolt||Hub|
|Promise Technology, Inc||Pegasus R6||Storage|
|Seagate||GoFlex ThunderBolt Adapter||HDD Adapter|
|Seagate||GoFlex Desk ThunderBolt Adapter||HDD Adapter|
|Sonnos||Sonnet ECHO ExpressCard||ExpressCard|
|Sumitomo Electric||Thunderbolt Cable||Cable|
|Western Digital||My Book Thunderbolt Drive||Storage|
Although Thunderbolt is going to be a niche connection (mostly due to expense of cables and components vs the “good enough” and much cheaper USB 3.0 standard) for the foreseeable future, Computex 2012 is trying its best to drive home the idea that Thunderbolt is not going away. There are definitely more Thunderbolt devices than I had originally predicted to show up at the show in Taipei.
Subject: Motherboards | June 5, 2012 - 03:40 PM | Tim Verry
Tagged: trinity, msi, htpc, fm2, computex, amd
Located at Booth L0810 in Nangang Hall 4F, MSI is showing off a tong of new hardware. One of the interesting displays is a wall of new motherboards based on AMD’s desktop Trinity APUs. Using the company’s Hybrid Digital Power design, the FM2 socket-based motherboards come in three sizes: EATX, ATX, and mini-ITX to meet various project needs.
MSI's Trinity display at Computex 2012. Source: MSI
The smallest of the bunch is the MSI A85IA-E53 motherboard, which is designed for HTPC use. Based on AMD’s A75 chipset, the mini-ITX board features an AMD FM2 socket in the middle, with two DDR3 DIMM slots (a maximum of 16GB of memory) below, a single PCI-E 2.0 x16 slot to the left, and four SATA 6Gbps ports to the right of the FM2 socket.
Rear IO on the board includes a combo PS/2 port, optical audio (TOSLink) output, VGA and HDMI video outputs, three eSATA ports, two USB 3.0 ports, two USB 2.0 ports, a Gigabit LAN port, and analog audio out via three 3.5mm jacks. The motherboard also features integrated WiFi and Bluetooth radios. Built with the company’s military class III components, the A85IA-E53 comes packed with the ClickBIOS II, OC Genie II, and support for HD7000 series graphics cards.
MSI has two mid-sized ATX form factor motherboards with the the MSI A55M-P33 (F2) and MSI A85MA-35. The former is intended for traditional desktop use cases while the latter is rather shallow in depth and is meant to be used in living room HTPCs.
MSI A55M-P33 (F2)
The MSI A55M-P33 (F2) is the company’s budget desktop motherboard. It supports OC Genie II and ClickBIOS II technologies as well as AMD Dual Graphics which allows the pairing of a Trinity APU integrated graphics card and discrete AMD GPU. In adition to the FM2 socket, the board features two DDR3 DIMM slots (maximum of 16GB of 1866MHz memory), four SATA 3Gbps ports, one PCI-E 2.0 x16 slot, one PCI-E 2.0 x1 slot, and one legacy PCI slot.
This motherboard is actually based on the AMD A55 chipset which explains the lack of 6Gbps ports and USB 3.0 support. The company describes the board as the “value choice” for those upgrading to a new Trinity-based system. Rear IO on the A55M-P33 (F2) includes eight USB 2.0 ports, six 3.5mm jacks for analog audio output, Gigabit Ethernet, and DVI and VGA display outputs.
The second ATX motherboard is the MSI A85MA-E35. This motherboard has been designed wider and shallower than traditional desktop ATX boards so that it can fit into slim HTPC cases (that usually have more room longways than height-wise as they need to be able to fit into AV racks and other short spaces). It is essentially the mATX A85IA-E53’s big brother as it takes the AMD A75 chipset and takes advantage of the larger PCB area to add additional functionality. The motherboard features MSI’s OC Genie II and ClickBIOS II technology and AMD’s Dual Graphics support for pairing a dedicated GPU with the Trinity APU’s graphics portion.
The board is rather spaced out as the PCB is stretched out to keep things as shallow as possible. It does feature two DDR3 DIMM slots (maximum of 16GB 1866MHz RAM), the AMD FM2 processor socket, one PCI-E 2.0 x16 slot, two PCI-E 2.0 x1 slots, and one legacy PCI slot. The only motheboard component with a heatsink attached is the southbridge, which is powering six SATA ports, at least four of which are 6Gbps (MSI only lists four 6Gbps ports in the documentation, seen above and to the right of the board [TechPowerUp indicates that all six are 6Gbps, however]). Rear IO includes four USB 3.0 ports, six analog audio out jacks, Gigabit LAN, and what is likely a PS/2 port and optical audio output.
Finally, the FM2 motherboard to rule them all (or at least the company’s AMD lineup) is the MSI A85XA-G65. The board comes packed with MSI technology including Military Class III components, OC Genie II, ClickBIOS II, Hybrid Design Power, THX TruStuio Pro, AMD Dual Graphics (APU+discrete card), AMD CrossFire, NVIDIA SLI, and AMD Eyefinity.
In other words, MSI has bolted just about everything it could to this board. They confidently labeled the motherboard as the board for enthusiasts to use to push Trinity overclocks as far as possible. The first thing I noticed about the image (seen below) of the A85XA-G65 was the massive heatsinks on the VRMs and southbridge – did I mention they were huge? In addition to the well-cooled VRMs, the motherboard features four DDR3 DIMM slots (max of 32GB 1866MHz RAM), two PCI-E 2.0 x16 slots, three PCI-E 2.0 x1 slots, and two legacy PCI slots towards the bottom of the board. To the right is the southbridge (with relatively large heatsink) powering eight SATA 6Gbps ports.
The A85XA-G65 supports DisplayPort, DVI, HDMI, and VGA video outputs. Beyond that, rear IO includes a combo PS/2 port, four USB 2.0 ports, two USB 3.0 ports, Gigabit LAN, six 3.5mm jacks for multi-channel analog audio outputs, and an optical audio output. If you want to push desktop Trinity to the max, this board definitely seems like a good place to start.
MSI has definitely come out in full force with a slew of AMD Trinity motherboards. The HTPC ones, and the mini-ITX one in particular, interest me. The beastly A85XA-G65 is also pretty neat for overclocking potential. Stay tuned to PC Perspective for more Computex 2012 coverage! What do you guys want to see from the show? You can see a few more photos after the break.
Subject: General Tech | June 5, 2012 - 10:37 AM | Tim Verry
Tagged: windows 8, computex, benchmarking, 3dmark
Popular benchmarking software company Futuremark has announced on their website a new version of their 3DMark application for Windows 8 benchmarking. While not available for download (yet), the application can be used to benchmark the performance of Windows 8 machines. Currently the company is calling the software "3DMark for Windows 8" which breaks the traditional numbered naming scheme.
Not much is known about the particulars yet, but we were able to snag some screenshots from their site which may or may not be publicly available any more. Take a look below the break (there are quite a few). More information should be coming shortly as Computex 2012 marches on.
I will miss the rocket powered airship and big guy with the minigun, but I suppose these benchmarks will be fun to watch as well.
Subject: Graphics Cards | June 5, 2012 - 09:59 AM | Tim Verry
Tagged: nvidia, mars 3, gtx 680, computex, asus
ASUS has created a graphics card that places two NVIDIA GTX 680 GPUs and 8GB of RAM on a single PCB cooled by three fans and a heatpipe-aided fin array. With three PCI-E power connectors and a dual slot design, you can bet that it will be expensive, large, and in charge (of your electric bill). (Even so, I still want one even if I have to get a new case :P).
ASUS is showing off a graphics card at Computex that is sure to be of interest to enthusiasts everywhere. The successor to their elusive Mars II (which we reviewed here), the new ASUS Mars III is a dual GPU graphics card utilizing two NVIDIA GTX 680 GPUs and a total of 8GB of GDDR5 memory on a single PCB. The dual slot card is cooled by three fans on an aluminum and heatpipe aided fin array. Around the back of the card are three eight pin PCI-E power connectors for up to 525watts of power! There is also a red button to the left of the connectors that spins the fans up to 100% for maximum overclocking. Towards the front is a single SLI connector (for up to 4-way SLI) along with three DVI ports and a mini-DisplayPort for video output.
In short, this graphics card is a total beast. Although we do not yet know clockspeeds or other specific details, you can expect the cards to be expensive and very fast. According to VR-Zone, the card being shown off at Computex 2012 is an engineering sample and the company is still working to refine the final design – particularly the cooler and PCB. You can find more photos of this massive card here.
Subject: Storage | June 4, 2012 - 10:07 PM | Allyn Malventano
Tagged: ssd, sandisk, pcie, enterprise, computex
Just over a month back we took a look at the Intel SSD 910 Series PCIe SSD. While the specs and performance were excellent, there were some factors preventing use in workstation systems - namely the prohibitive cost and lack of a Boot ROM. With that, it seems SanDisk has made an attempt to answer that call. Today at Computex they announced a new PCIe Enterprise SSD, the PCIe Lightning:
This is a much simpler layout, with flash right alongside the controller - an option not possible with the multi-PCB Intel 910 Series as it contained much more flash on its daughter boards. With this simpler layout comes lower cost but unfortunately lower maximum capacities. Less complexity also means lower maximum specs, but they still look quite good given the price point this card will be filling:
- Price: $1350 (200GB) / $2350 (400GB)
- 4k 70/30 R/W split: 23,000 IOPS
- Sequential Throughput: 425 MB/sec
- Warranty: 5 Year
- Endurance: 10 full-drive writes per day for warranty duration
I'm glad to see some good PCIe SSD competition cropping up - especially the bootable kind.
Subject: General Tech, Cases and Cooling, Shows and Expos | June 4, 2012 - 09:09 PM | Jeremy Hellstrom
Tagged: rosewill, computex, computex 2012, Fortress, Tachyon, SilentNight, Hercules, Throne
Rosewill is up to quite a bit at this years Computex with quite a few different products to house or interface with your computer. Starting with the largest of their new lineup; who wouldn't want another full sized Throne in their house?
Nine hard drive bays with four fans passing air over them, ten expansion bays to handle even the Wonder Twin Dream System with handy grommets for watercooling or wire management the interior of your case will look snazzy. A bottom mounted PSU and top mounted large exhaust fan does make air cooling an extreme system possible for any hydrophobics out there. Those preferring a good looking exterior will like the LEDs.
Speaking of PSUs, they are showing off an 80Plus Platinum Certified tro at Computex with the Fortress, Tachyon and SilentNight with the 1600W Hercules standing tall above them.
They have two mechanical keyboards on display as well, though they do not specify which type they have used, the Limited Edition Elite Ivory RK-9000 series and the backlit RK-9100. That doesn't cover all the releases they have (though it does their pictures), as they have the RSV-L4500 server chassis with up to 15 3.5" drives and eight 120mm fans, the RMX-N360RT wireless router for beginning network techs as well as experienced ones and a dual Xeon Super System named after a cult classic, which may be the only way to lay your hands on four GTX680's, the Red Dawn.
Subject: Motherboards, Displays | June 4, 2012 - 06:30 PM | Ryan Shrout
Tagged: Z77, thunderboltex, thunderbolt, h77, computex, asus
Ever since we posted our series of videos with ASUS on the new Z77 chipset and the features ASUS was introducing on their P8Z77 lineup, we have had countless questions about the Thunderbolt header, the implementation and finally the required add-on card to enable it. Well thankfully at Computex this week ASUS is revealing the product that users of the P8Z77 motherboards will need to enable the Thunderbolt connection, the ASUS ThunderboltEX.
Even though we have already had some hands-on time with the new ASUS P8Z77-V Premium motherboard that integrates a Thunderbolt header on the board directly, the rest of the P8Z77-V line has a 9-pin header labeled "TB_header" that will allow users to purchase the ThunderboltEX card and enable the technology in their system. ASUS was the only company to really plan ahead for Thunderbolt technology across the entire series of Z77 motherboards and as such should enjoy the feature benefits of TB for some time.
The ThunderboltEX will plug into the bottom PCIe slot using up the x4 connection and will be required to use a header cable to connect to the TB_header shown above. This header serves a dual purpose - it allows the integrated graphics of the Ivy Bridge (and even discrete graphics) to pass through to the ThunderboltEX card and then out to either a Thunderbolt enabled display or a DisplayPort monitor in a daisy chain of devices. It also allows ASUS to make sure this card is ONLY used on their own lineup of motherboards - sorry, you won't be able to buy the ASUS ThunderboltEX and use it on your Gigabyte or MSI or even your non "TB_header" ASUS motherboard.
You will also have to install an included full-size DisplayPort cable from the output on the Z77 motherboard back panel to the full-size DP input on the ThunderboltEX itself. This allows the pass through of all the video data.
Once everything is configured, users will have a full speed 10 Gbps ready Thunderbolt connection to use with external storage, break out boxes and other accessories coming down the pipeline rapidly. ASUS claims this implementation will still support 6 daisy-chained devices with a seventh device as either a Thunderbolt or mini-DisplayPort monitor. Even better, hot plug support will still be enabled!
ASUS stands committed to the belief that motherboard design is not just about pure spec but ensuring a quality design and overall implementation. This is achieved through many means such as sensible layout, flexible I/O connectivity and robust control over parameters of operation. In addition foresight in design can play an important role. ASUS recently launched the world’s first certified native Thunderbolt motherboard with the P8Z77-V Premium. While the Premium leads the industry in respect to connectivity and overall functionality it carries a flagship price for its premium feature set. ASUS had kept this in mind along with thinking about how to best support the advanced new interconnect that is Thunderbolt. With this in mind ASUS is proud to unveil its exclusive Thunderbolt upgrade solution for its line of Z77 and H77 motherboards. The ThunderboltEX card is the first add-on card on the market enabling an easy way to upgrade ASUS motherboards with the latest I/O. This is proof in having foresight in design as compatible boards had to have a special TB header in place to support this upgrade.
Currently, the ThunderboltEX is awaiting Thunderbolt device certification and ASUS will obviously announce when that occurs.
Obviously this implementation of Thunderbolt is not as elegant as the one you will find on the ASUS Premium Z77 motherboard or the MSI Z77A-GD80, but it does enable other ASUS Z77 motherboard users to add the feature to their systems without REQUIRING to the cost up front to everyone. It does remind me a little bit of the first days of ATI CrossFire but I think most of you would agree that this solution is better than forcing users to buy a $450 motherboard.
I don't have any information on pricing or availability but you can be sure as soon as our questions are answered by ASUS we will update this post!
If you are looking for more information on Thunderbolt devices and performance, check out our stream of posts on the subject and take a look at the Thunderbolt / ASUS video below!