CES 2015: EVGA Shows Two New GTX 980 Cards

Subject: Graphics Cards, Shows and Expos | January 8, 2015 - 12:46 AM |
Tagged: video, maxwell, Kingpin, hydro copper, GTX 980, GM204, evga, classified, ces 2015, CES

EVGA posted up in its normal location at CES this year and had its entire lineup of goodies on display. There were a pair of new graphics cards we spotted too including the GTX 980 Hydro Copper and the GTX 980 Classified Kingpin Edition.

evga-1.jpg

Though we have seen EVGA water cooling on the GTX 980 already, the new GTX 980 Hydro Copper uses a self-contained water cooler, built by Asetek, rather than a complete GPU water block. The memory and power delivery is cooled by the rest of the original heatsink and blower fan but because of lowered GPU temperatures, the fan will nearly always spin at its lowest RPM.

evga-2.jpg

Speaking of temperatures, EVGA is saying that GPU load temperatures will be in the 40-50C range, significantly lower than what you have with even the best air coolers on the GTX 980 today. As for users that already have GTX 980 cards, EVGA is planning to sell the water cooler individually so you can upgrade yourself. Pricing isn't set on this but it should be available sometime in February.

evga-3.jpg

Fans of the EVGA Classified Kingpin series will be glad to know that the GTX 980 iteration is nearly ready, also available in February and also without an known MSRP.

evga-4.jpg

EVGA has included an additional 6-pin power connector, rearranged the memory traces and layout for added memory frequency and includes a single-slot bracket for any users that eventually remove the impressive air cooler for a full-on water block.

Coverage of CES 2015 is brought to you by Logitech!

PC Perspective's CES 2015 coverage is sponsored by Logitech.

Follow all of our coverage of the show at http://pcper.com/ces!

EVGA Teases Classified X99 Micro mATX Motherboard

Subject: Motherboards | August 23, 2014 - 11:45 PM |
Tagged: X99, socket 2011-3, Intel, Haswell-E, evga, ddr4, classified

As Intel's next generation enthusiast desktop platfom gets closer to fruition, several leaks (such as Gigabyte's X99 manual) and motherboard teasers have surfaced on the Internet. A few days ago, EVGA posted a teaser photograph of an upcoming "next generation" Micro ATX motherboard on its Instagram page.

EVGA X99 Micro mATX Haswell-E Motherboard.jpg

The so-called EVGA X99 Micro is set to be the company's smallest Classified-branded X99 chipset offering supporting multiple graphics cards, DDR4 memory, and (of course) Intel's upcoming Haswell-E processors. The all-black motherboard features black heatsinks over the PCH and power delivery hardware. It is outfitted with a 10-phase VRM that feeds the CPU socket (socket 2011-3), two DDR4 memory sockets on each side of the processor socket, three PCI-E 3.0 x16 slots (just enough to max out a Core i7-5820K), one M.2 connector, and six SATA III 6Gbps ports. The board will support USB 3.0 and USB 2.0 ports, but beyond that it is difficult to say what the exact rear IO port configuration will be as a metal shield blocks off the ports in the teaser photo. There is an eight pin CPU power connector along with a 24-pin ATX connector for getting power to the board. Overclockers will be further pleased to see physical power and reset buttons.

According to Maximum PC, this pint sized Classified motherboard will be priced around $250 USD making it one of the most expensive mATX motherboards around. As part of EVGA's Classified series, it should be packing plenty of overclocking friendly features in the UEFI firmware and hardware build quality. This could make for one heck of a powerful small form factor system though, and I'm looking forward to seeing what people are able to get out of this board (especially when it comes to overclocking Haswell-E)!

Source: EVGA

EVGA Demos X79 Classified Motherboard at GeForce LAN 6

Subject: Motherboards, Chipsets | October 16, 2011 - 10:23 PM |
Tagged: evga, x79, classified

NVIDIA held its 6th GeForce LAN this weekend on the USS Hornet aircraft carrier based in Oakland, CA and at that event EVGA took the time to show off its upcoming X79 Classified motherboard.  As reported by the guys over at Legit Reviews, there will apparently by three different models available at the time of the Socket 2011, Sandy Bridge-E launch sometime in November. 

evgax791.jpg

Image from Legit Reviews.com

With plans to release an SLI, FTW and Classified model, EVGA was showcasing the flagship Classified model on stage with overclocker Kingpin.  You can see that the board above has some very unique layout points and features including five x16 PCIe slots (with a single x1) and support for Quad SLI all spaced out for large graphics cards.  EVGA is using their enthusiast expertise to design a board specifically for power users it appears. 

evga792.jpg

Image from Legit Reviews.com

From the back panel it looks like the board will have 8 total USB 3.0 ports, dual Gigabit Ethernet, eSATA and Bluetooth. 

Intel was also on the stage and showed off its new Socket 2011 and LGA1366/1155/1156 compatible self-contained water cooler with a custom design from Asetek.  It should be available around the same time as the pending Sandy Bridge-E platform release, boxed and sold separately.  Interestingly it was pointed out that the fan was designed and built by Intel directly which will "offer a superior single fan cooling solution also optimized for outstanding acoustics."  I am eager to see what Intel was able to do differently than other cooling vendors.

There are more photos and details on the EVGA X79 Classified motherboard over at Legit Reviews so head over there for more!