Cirrus7 Shows Off Fanless Nimbini Broadwell NUC PC

Subject: General Tech, Cases and Cooling | April 28, 2015 - 08:15 PM |
Tagged: cirrus7, SFF, nuc, broadwell-u, fanless

Next month, German manufacturer Cirrus7 will begin shipping its new Nimbini system. The Nimbini is an even smaller variant of the company’s small form factor Nimbus PC. This time, Cirrus7 has managed to pack a Intel NUC system into a fanless case with multiple layers of stacked laser cut aluminum panels that double as a heatsink for the internals. Even better, the Nimbini supports Intel’s Rock Canyon and Maple Canyon NUC boards, and supports Broadwell-U processors up to the 28W Core i7 models with Iris Graphics (e.g. the two core, four thread, Core i7-5557U with Iris Graphics 6100).

Cirrus7 Nimbini Fanless Broadwell NUC Case.jpg

The Nimbini will come as a complete system (150 x 150 x 87mm) preloaded with Windows or Ubuntu Linux operating systems or as a barebones DIY kit – which at upwards of 90 pieces (per FanlessTech) is not for the faint-of-heart! This case can be customized to add different covers and to vary the thickness of the case by adding or removing layers. The standard configuration leaves room for a 2.5” drive in addition to the usual M.2 SSD used with NUCs. If you aren’t using that second storage drive, you can make the case thinner or expand it for maximum cooling. While also aesthetically pleasing, the best part about the aluminum construction is that it is a fanless design which is perfect for a HTPC (home theater PC) or audio engineering setup. Cirrus7 claims to support up to 28W processor TDPs without any fans.

Cirrus7 Nimbini Fanless Broadwell NUC Case Back.jpg

Rear IO for the Intel Maple Canyon NUC installed in the layered Nimbini chassis.

Cirrus7 will being taking pre-orders in May. Among others, both the Rock Canyon (with its IR receiver and accompanying case window) and Maple Canyon internal hardware (NUC boards) with dual DisplayPort outputs will be on offer. Pricing has not yet been announced, but it looks promising if you are looking for a premium silent SFF PC.

Source: Cirrus7

Newly Refreshed Cirrus7 Nimbus Looks Cool (Pun Intended)

Subject: General Tech, Systems | November 11, 2014 - 11:11 PM |
Tagged: cirrus7, haswell-t, haswell, fanless

This one is more for our European readers, because this company operates out of Germany, but the Cirrus7 Nimbus is an interestingly designed, fanless system. Its fin shape is said to be assembled out of laser-cut layers of aluminum that sandwiches in the I/O plate at the rear. FanlessTech has noted that the systems are now available with Haswell processors, up to a Core i7 based on Haswell-T. Their storage options now also include the Samsung 850 Pro, up to 1TB.

cirrus-nimbus_2.jpg

Image Credit: Cirrus7 via FanlessTech

The customization options are actually pretty decent. I find that a lack of meaningful upgrades to be a problem with modern PC builders, however this one does not apply. Eight CPUs are offered, ranging from a Celeron up to a 45W Haswell-T; RAM comes in 4GB, 8GB, or 16GB; up to three drives can be installed, up to one mSATA and up to two SATA; Intel Wireless N or AC is available; external DVD or BluRay burners are an option; and one of seven OSes can be installed, including two versions of Linux (Ubuntu 14.04 or Ubuntu 14.10). If you get all of the bells and whistles, you are probably up to about 3,000 USD, but you cannot expect two terabytes of Samsung 850 Pro SSDs to be cheap. It seems reasonable enough, especially for the EU. The big limiter is the lack of a discrete GPU unless you are using this device for something like audio recording, which an Intel HD 4600 can easily handle.

The Cirrus7 Nimbus is available now at their website.

Source: Cirrus7

Cirrus7 Launches SFF Nimbus PC With Aluminum Fin Stack (Heatsink) Case

Subject: Systems | May 28, 2013 - 06:22 PM |
Tagged: SFF case, SFF, passive cooling, nimbus, heastink, fanless, cpu cooler, cirrus7

German PC manufacturer Cirrus7 has launched a new small form factor (SFF) PC called the Nimbus that uses slices of aluminum that do double duty as both a case and a passive CPU cooler (heatsink).

The Nimbus PC features an Intel DQ77KB motherboard and low-power Intel processor along with configurable DDR3 and mSATA storage options. The base model will come with 4GB of DDR3 and a 60GB mSATA SSD. CPU options include the Intel G1610T, G2020T, Core i3-3220T, i3-3470T, i5-3570T, and i7-3770T. From there you can add up to two 7mm 2.5” hard drives (or SSDs) and increase the amount of RAM (for a higher price, of course).

Cirrus7 Nimbus SFF PC.jpg

The Intel DQ77KB board supports vPro and KVM over IP on systems with the Core i5 or higher processor. It has the following external IO options:

  • 4 x USB 3.0
  • 4 x USB 2.0
  • 2 x Intel Gigabit LAN
  • 2 x Audio jacks (green jack is dual purpose, mini-TOSLink compatible)
  • 1 x HDMI
  • 1 x DisplayPort

The SFF PC comes preloaded with either Ubuntu 13.04, Ubuntu 12.04, or Windows 8 (depending on your choice at checkout).

Cirrus7 Nimbus PC.jpg

Check out more photos of the Nimbus at FanlessTech.

In order to keep the hardware cool, Cirrus7 has opted for an all-aluminum enclosure that is built around and over the motherboard in a fin-spacer-fin pattern. Each aluminum fin is 12mm high and the height of the system can be varied by adding or reducing the number of fins used. For example, using all fins allows Cirrus7 to support higher TDPs like the Core i7 3770T. Alternatively, if you are just using an i3-3220T, you could get by with a smaller (and lighter) case/heatsink. Notably, judging by the hands-on photos over at FanlessTech, the Nimbus does not use a copper CPU block which may have reduce the heatsink's effectiveness. That, or maybe Cirrus7 expects that they have slapped enough aluminum fins on the system that it doesn't matter much (heh). Also note that the case is not completely sealed, so although it is passively cooled, it is definitely not water or dust proof. Beyond that though, the case looks nice and the system would make a nice silent backup server, router, or HTPC!

The Nimbus will be available towards the end of June in Germany and Europe, with worldwide shipping available upon request. The system starts at €499 for the base model which is approximately $640 USD (before shipping). That price includes the case, processor, motherboard, RAM, and mSATA drive. Cirrus 7 has stated that Haswell-based models of the Nimbus will be available at some point, but are not expected until around the end of 2013 at the earliest.

Source: Cirrus7