CES 2014: Corsair Flash Voyager GO is On-The-Go (OTG)

Subject: General Tech, Storage, Mobile, Shows and Expos | January 7, 2014 - 12:00 PM |
Tagged: OTG, On-The-Go, Flash Voyager GO, corsair, CES 2014, CES

So this makes sense, finally. USB On-The-Go is a specification which allows for devices to perform as either a USB Host or a USB Slave at will. In other words, your can plug your phone into your PC via its MicroUSB 3.0 (Update: It looks like I'm wrong and it's Micro USB 2.0) connection to synchronize files and charge it and then, later, have that same port accept USB thumb drives. Of course, that requires a USB storage device with a MicroUSB 3.0 2.0 plug.

corsair-voyager_go_3D_64GB.jpg

The Corsair Flash Voyager GO USB OTG is one such thumb drive. It has the ability to plug into MicroUSB 3.0 2.0 ports on Android OTG-compatible phones and tablets. For convenience, it also has the ability to plug into full-sized USB 3.0 making it useful for both phone and laptop or desktop. USB 2.0 is also supported. It registers as a standard USB Mass Storage Device so no special software is required for Windows, Mac OSX, or Linux.

I find this very interesting albeit I am not a mobile user. I do wonder when we will see large capacity harddrives using this standard. It seems like a natural progression as demand for phones with video-out increases. Flash memory is nice but, when compared to microSD cards which are not vulnerable and hanging out of the USB port, I am not sure if there is enough capacity. Again, I am not a mobile user. I know that someone out there already has their credit card out.

The Flash Voyager GO will be available in 16 GB ($19.99 USD), 32 GB ($29.99 USD), and 64 GB ($49.99 USD) variants. It is rated to transfer at up to 135 MB/s over USB 3.0.

Press release after the break.

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Corsair

CES 2014: Corsair AX1500i Announcement

Subject: General Tech, Cases and Cooling, Shows and Expos | January 7, 2014 - 12:00 PM |
Tagged: PSU, corsair, CES 2014, CES, Arc Welding, 1500W PSU

Yadda yadda arc welding yadda Allyn yadda yadda podcast bingo.

For the last seven or eight years, Corsair has released a boatload of power supplies, running the whole gamut of potential customers, since their initial HX620W release in 2006. Their current line-up is broken into eight distinct series. Some are modular, some are fully modular, and others are not. Several models hold the lowercase "i" suffix which signify USB connectivity to monitor and adjust the unit from their Corsair Link utility.

corsair-AX1500i_FPO.png

Today, Corsair is announcing the AX1500i fully modular power supply. At 1500 watts, this should be an effective upper limit on desktop power consumption. The real news is its efficiency: 94% efficient at half load on 115V input (North America). The PSU exceeds the specification set out for 80 PLUS Platinum and falls within the current draft of 80 PLUS Titanium (consumer).

It is also designed to be quiet and even fanless when drawing under 450 watts.

The suffix on the AX1500i signifies that it also integrates with Corsair Link through USB. Temperature, draw, loads, fan speed adjustments, and power efficiency are exposed to the user who wants to see a few more graphs in their secondary monitors... because if you have a single 1080p panel then you are doing something wrong somewhere.

The AX1500i is expected to retail for $449.99 in Q2 2014 and is backed by a 7-year warranty.

Press blast after the break!

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Corsair

Corsair Hydro Series H105 Liquid CPU Cooler

Subject: Cases and Cooling | January 7, 2014 - 12:00 PM |
Tagged: water cooling, Intel, Hydro Series, H105, corsair, CES 2014, CES, amd

The newest member of the Corsair Hydro Series ™ all-in-one liquid coolers is the H105 CPU liquid cooler.

02-H105_hero_no_fan.png

Courtesy of Corsair

03-H105_hero_base.png

Courtesy of Corsair

The Hydro Series ™ H105 Liquid CPU Cooler features a dual-fan radiator capable of hosting up to four 120mm fans (two on the front and two on the back). The radiator has been redesigned compared with past models to enhance its cooling potential. Corsair increased the radiator thickness to 38mm (compared to the 25mm thickness on the H100), increasing the radiator's surface area for better heat dissipation potential compared with the 25mm models. Further, Corsair redesigned the CPU mounting block to make it entirely tool-free. The CPU block is a round copper base plate with an integrated pump and illuminated Corsair logo.

 

04-H105_ring_blue.png

Courtesy of Corsair

05-H105_ring_red.png

Courtesy of Corsair

Corsair added a new level of customization to the H105 by including two additional color rings, allowing you to change the color ring along the top of the CPU water block to match your case theme. In addition to the base grey, Corsair includes red and blue rings for the top of the waterblock.

06-H105_hardware_kit.png

Courtesy of Corsair

The Corsair Hydro Series ™ H105 Liquid CPU Cooler supports a variety of AMD and Intel CPUs and motherboards out of the box including the following: AM2, AM3, FM1, FM2, LGA 1156, 1155, 1150, 1366, and 2011.

The Corsair Hydro Series ™ H105 Liquid CPU Cooler will be available in January 2014 from all worldwide retailer partners for an MSRP for $119.99. The unit also comes with an impressive 5 year warranty.

Press release after the break.

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Corsair

CES 2014: Corsair Launches the Obsidian 250D Mini ITX Case

Subject: General Tech, Cases and Cooling | January 7, 2014 - 12:00 PM |
Tagged: obsidian 250d, corsair, CES 2014, CES

Do you like the design of Corsair's Obsidian Series PC cases, but don't have room for a mid-tower or full tower form factor? Well, Corsair may have a solution for you with the release of its new Obsidian 250D, which is the company's first Mini ITX chassis. The Obsidian 250D brings the aesthetics and many of the builder-friendly features of its larger brethren in a small sub-$100 brushed aluminum and steel case.

Specifically, the Obsidian 250D measures 11.4" x 10.9" x 13.81". The cube-like case is all black with a basic brushed aluminum texture. Corsair branding, a single 5.25" drive bay, two USB 3.0 ports, and two audio jacks adorn the front while vents sit on the left, right, and rear sides of the case. Further, the top panel of the case is removable and is how you get to the internal hardware. The case is propped up on integrated feet as well.

250D_hero_down_from_left.png

Corsair's new Mini ITX case supports both air and water cooling. The case comes pre-installed with one AF140L and one AF120L fan, and users can install a total of 5 fans (including the bundled fans). On the water cooling front, users can install a 120mm or 140mm radiator in the front of the case as well as a 120mm or 240mm radiator on the side of the case. One nice feature on the cooling front is that Corsair has included removable dust filters on the front, side, and PSU vents.

250D_Close_up_hydro_series_install.png

Despite the Mini ITX form factor, the case actually allows users to cram a fair amount of hardware into it. In all, the Obsidian Series 250D supports two PCI slots, four hard drives, a single optical drive, a full size power supply, and Mini ITX motherboards. Users can install a graphics card up to 290mm in length, which is most cards on the market at a bit over 11-inches. The case supports ATX power supplies up to 200mm. When it comes to storage options, users can install up to two 2.5" drives and two 3.5" drives (or four total 2.5" drives) which is not bad. Additionally, this Obsidian case features cable management tie down points and tool-less drive bays.

250D_back_view.png

The Obsidian 250D has an MSRP of $89.99 and will be available for purchase later this month in the US. The mini ITX chassis comes with a 2 year manufacturer warranty. It looks like a decent case, and I'm interested to see what reviewers have to say about it when it comes to ease of working with and installing hardware into.

Please stay tuned to PC Perspective for more CES 2014 coverage!

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Corsair

CES 2014 Podcast Day 2 - ASUS, Lucid, Valve, Seagate and more!!

Subject: General Tech | January 7, 2014 - 05:21 AM |
Tagged: video, valve, SteamOS, Seagate, podcast, lucid, LaCie, iosafe, CES 2014, CES, asus

CES 2014 Podcast Day 2 - 01/06/14

It's time for podcast fun at CES!  Join us as we talk about the second day of the show including new products from ASUS, Lucid, Valve, Seagate and more!!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Ryan Shrout, Josh Walrath, Allyn Malventano and Ken Addison

Program length: 57:03

Be sure to subscribe to the PC Perspective YouTube channel!!

 

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Digital Storm Releases the Bolt II: Steam Machine!

Subject: Systems | January 7, 2014 - 05:08 AM |
Tagged: CES, steam os, Steam Machine, Steam Controller, small form factor, dual boot, Digital Storm, CES 2014, Bolt 2

Today Digital Storm has announced the Bolt 2 small form factor computer.  This little number is marketed as a “Steam machine”, and for very good reasons.  This particular number packs in quite a punch in a very small space.

b201.jpg

The custom designed case has a very effective and logical layout.  It really is quite small, but it is very strong and robust.  It can handle a micro-ITX board, multiple drives, and a dual slot graphics card.  The system I saw was decked out with a GTX 780 Ti along with the Intel i7 4770K.  It includes Digital Storm’s proprietary lighting and cooling module which of course controls the lighting… and cooling fan speed for the system.

Cooling is primarily based on the Corsair H100i dual fan unit.  This portion takes air from one side/top of the case (depending on orientation) and then vents it through the rest of the chassis.  The graphics card takes air from the other side of the case and routes it out the back.  This cooling solution allows a fair amount of overclocking to be attempted by the end user, but it does have limitations as compared to a larger system with more airflow.

b202.jpg

The design utilizes a 700 watt power supply, which is pretty impressive considering the space constraints that Digital Storm has to deal with.  A lot of work with partners has allowed them to include this very small unit with a pair of 30 mm fans at either end.  One would expect such fans to produce a LOT of noise.  This is happily not the case.  The design is good enough, and efficient enough, that at higher loads (including overclocking) it stays very quiet.

The system is very accessible, far more than most would expect.  Anyone that has worked on an older small form factor case will testify as to how annoying and contorted setting up hardware (or swapping it out) can be.  Digital Storm again took their time with the design to make sure that installation and the changing of components is as simple as possible.  A person armed with a screwdriver can get to any major component in a few seconds.  Swapping out the video card would take the amount of time of removing four screws, unplugging the power, and making sure not to rip out the PCI-E 16X ribbon connecting the card to the board.

b203.jpg

Prices for the unit start at $1500 and go above $2500, depending on component choices.  When Valve finalizes the Steam OS and has it ready for prime time, Digital Storm will be including the Steam controller with the build.

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

AMD CES 2014 Presentation: Kaveri Goes Official

Subject: Processors | January 7, 2014 - 04:52 AM |
Tagged: amd, CES, 2014, Kaveri, A10 7850K, A10 7700K, APU, firepro, hsa

This year’s AMD CES was actually more interesting than I was expecting.  The details of the event were well known, as most Kaveri details have been revealed over the past few months.  I was unsure what Lisa Su and the gang would go over, but it was actually more interesting than I was expecting.

kav01.jpg

This past year has been a big one for AMD.  They seem to be doing a lot better than others expected them to, especially with all of the delayed product launches on the CPU side for quite a few years.  This year saw the APU take a pretty prominent place in the industry with the launch of the latest generation consoles from Sony and Microsoft.  AMD made inroads with mobile form factors with a variety of APUs.  The HSA Foundation members have grown and HSA members ship two out of every three connected, smart devices.  Apple also includes Firepro graphics cards with all of their new Mac Pros.

Kaveri is of course the big news here.  AMD feels that this is the best APU yet.  The combination of Steamroller CPU cores, GCN graphics compute cores, HSA, hUMA, HQ, TrueAudio, Mantle support, PCI-E 3.0 support, and a configurable TDP makes for a pretty compelling product.  AMD has shuffled some nomenclature about by saying that Kaveri, at the top end, is comprised of 12 compute cores.  These include 4 Steamroller cores and 8 GCN compute clusters.  Each compute cluster matches the historical definition of a core, but of course it looks quite a bit different than a traditional x86 core.

kav02.jpg

We have gone over Kaveri pretty extensively in the past.  The CPU is clocked at 3.7 GHz with a 4 GHz boost.  The graphics portion clocks in at 720 MHz.  It can support up to DDR-3 2400 MHz memory, which is really needed to extract as much performance out of this new APU.  Benchmarks provided by AMD show this product to be a big jump from the previous Richland, and in these particular benchmarks are quite a bit faster than the competing i5 4670K.

Gaming performance is also improved.  This APU can run most current applications at 1080P resolutions with low to medium quality settings.  Older titles can be run at 1080P with Medium to High/Extreme settings.  While this processor is rated at around 867 GFLOPS, which is around 110 GFLOPS greater than the previous top end Richland, it is more efficient at delivering that theoretical performance.  It looks to be a significant improvement all around.

kav03.jpg

Software support is improving with applications from companies like Adobe, The Document Foundation, and Nuance.  These cover HSA applications and in Nuance’s case, using the TrueAudio portion to clean up and accelerate voice recognition.  TrueAudio is also being supported in five upcoming games.  This is not a huge amount, but it is a decent start for this new technology.

Mantle is gaining a lot more momentum with support from 3 engines, 5 developers, and 20+ games in development.  They showed off Battlefied 4 running Mantle on a Kaveri APU for the first time publicly.  They mentioned that it ran 45% faster than Direct3D at the same quality levels on the same hardware.  The display showed frame rates up in the low 50 fps area.

kav04.jpg

AMD is continuing to move forward on their low power offerings based on Beema and Mullins.  Lisa claims that these parts are outperforming the Intel Baytrail offerings in both CPU performance and graphics.  Unfortunately, she mentioned noting about the power consumption associated with these results.  They showed off the Discovery tablet as well as a fully functional PC that was the size of a large cellphone.

They closed up the even by talking about the Surround House 2.  This demo looks significantly better than the previous iteration we saw last year.  This features something like a 34.2 speaker setup in a projected dome.  It is much more complex than the House from last year, but the hardware running it all is rather common.  A single high end Firepro card running on a single A10 7850K.  The demo is also one of the first shows of a 360 degree gesture recognition setup.

kav05.jpg

AMD has come a long way since hitting rock bottom a few years back.  They continue to claw their way back to relevance, and they hope that Kaveri will help them regain a foothold in the computing market.  They are certainly doing well in the graphics market, but the introduction of Kaveri should help them gain more momentum in the CPU/APU market.  We have yet to test Kaveri on our own, but initial results look promising.  It is a better APU, but we just don’t know how much better so far.

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

 

Source: AMD

CES 2014: ioSafe 1513+ spotted

Subject: Storage, Shows and Expos | January 7, 2014 - 04:33 AM |
Tagged: synology, NAS, iosafe, CES 2014, CES

Earlier today, ioSafe launched a new 5-bay disaster-proof NAS device. The ioSafe 1513+ is essentially a Synology DS 1513+ wrapped in ioSafe's durable and fire / water resistant enclosure tech.

2014-01-06 23-26-06.JPG

Here's a quick video interview with ioSafe CEO Rob Moore:

Three of these devices can be chained together, and with 6 TB drives installed, you get a whopping 90 TB of disaster-proof on-site storage!

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Full press blast after the break.

Source: ioSafe 1513+

CES 2014: Valve And 13 Launch Partners Unveil Slew of Steam Machines

Subject: Editorial, General Tech | January 7, 2014 - 02:25 AM |
Tagged: valve, SteamOS, steambox, opinion, Gabe Newell, CES 2014, CES

Valve Co-Founder Gabe Newell took the stage at a press conference in Las Vegas last night to introduce SteamOS powered Steam Machines and the company's hardware partners for the initial 2014 launch. And it has been quite the launch thus far, with as many as 13 companies launching at least one Steambox PC.

The majority of Steam Machines are living room friendly Mini-ITX (or smaller) form factors, but that has not stopped other vendors from going all out with full-tower builds. The 13 hardware partners have all put their own spin on a SteamOS-powered PC, and by the second half of 2014, users will be able to choose from $500 SFF cubes to ~$1000 Mini-ITX builds with dedicated graphics, to powerhouse desktop PCs that have MSRPs up to $6,000 and multiple GPUs. In fact, aside from SteamOS and support for the Steam Controller, the systems do not share much else, offering up unique options–which is a great thing. 

For the curious, the 13 Steam Machine hardware vendors are listed below.

  1. Alienware
  2. Alternate
  3. CyberPowerPC
  4. Digital Storm
  5. Falcon Northwest
  6. Gigabyte
  7. iBuyPower
  8. Materiel.net
  9. Next
  10. Origin PC
  11. Scan Computers
  12. Webhallen
  13. Zotac

As luck would have it for those eager to compare all of the available options, the crew over at Ars Technica have put together a handy table of the currently-known specifications and pricing of each company's Steam Machines! Some interesting takeaways from the chart include the almost even division between AMD and NVIDIA dedicated graphics while Intel has a single hardware win with it's Iris Pro 5200 (Gigabyte BRIX Pro). On the other hand, on the CPU side of things, Intel has the most design wins with AMD having as many as 3 design wins versus Intel's 10 (in the best case scenario). The pricing is also interesting. While there are outliers that offer up very expensive and affordable models, the majority of Steam Machines tend to be closer to the $1000 mark than either the $500 or $2000+ price points. In other words, about the same amount of money for a mid-range DIY PC. This is not necessarily a bad thing, as users are getting decent hardware for their money, a free OS, and OEM warranty/support (and there is nothing stopping the DIYers from making their own Steamboxes).

A SFF Steambox (left) from Zotac and a full-tower SteamOS gaming desktop from Falcon Nothwest (right).

So far, I have to say that I'm more impressed than not with the Steam Machine launch which has gone off better than I had expected. Here's hoping the hardware vendors are able to come through at the announced price points and Valve is able to continue wrangling developer support (and to improve the planned game streaming functionality from a Windows box). If so, I think Valve and it's partners will have a hit on their hands that will help bring PC gaming into the living room and (hopefully) on par (at least) in the mainstream perspective with the ever-popular game consoles (which are now using x86 PC architectures).

What do you think about the upcoming crop of Steam Machines? Does SteamOS have a future? Let us know your thoughts and predictions in the comments below!

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: Ars Technica

CES 2014: CyberPowerPC Steam Machine Series Coming In 2H 2014

Subject: General Tech, Systems | January 6, 2014 - 11:53 PM |
Tagged: steambox, steam os, Steam Machine, Cyberpower, CES 2014, CES

Today, CyberPowerPC announced its series of SteamOS-powered Steam Machines. Set to be available in the second half of this year, the Steam Machine series will come in several customizable models ranging in price from $499 to $699.

All models share a custom Steam Machine gaming case, a 500GB 7200RPM mechanical hard drive, 8GB of DDR3 memory clocked at 1600MHz, Valve's Steam OS, and a bundled Steam Controller. From there, the systems differ by processor, graphics, and networking hardware.

CYBERPOWERPC Steam Machine.JPG

On the low end, the $499 CyberPowerPC Steambox is powered by a dual core AMD A6-6400K Richland APU clocked at 3.9GHz, a Radeon R9 270 graphics card with 2GB of GDDR5 memory, and a Mini-ITX motherboard with 802.11n Wi-Fi and Bluetooth support.

Stepping up to the $699 mark gets you Intel and NVIDIA hardware in the form of a dual core/quad threaded Intel Core i3-4330 CPU clocked at 3.5GHz and a NVIDIA GeForce GTX 760 with 2GB of GDDR5 memory. The networking is also upgraded to 802.11ac Wi-Fi and Bluetooth 4.0.

CyberPowerPC Steam Machine Specification List.png

The chassis is a white case with black front panel and green LEDs. A Valve logo is on the top of the case. It certainly has a gaming console look that should sit well in your entertainment center. The front of the case has three USB 3.0 ports and two audio jacks. Personally, I look at the case and am reminded of classic cartridge-loading game consoles due to the cutout/depressed gray accent.

As always, stay tuned to PC Perspective for more information as it becomes available!

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: CyberPower