Corsair Releases ML Series Fans With Magnetic Levitation Bearings

Subject: Cases and Cooling | July 12, 2016 - 09:42 AM |
Tagged: magnetic levitation, fans, Corsair ML Series, corsair, case fan, air cooling

Corsair has announced the launch of their ML Series fans, which use the company's new Magnetic Levitation Bearing, along with a custom rotor design. Corsair says this combination will "deliver higher airflow, lower noise and better cooling".

ml_series.jpg

Corsair ML Series fans (Image credit: Corsair)

"When powered, the magnetic levitation bearing completely suspends the fan blades from the motor housing, delivering almost frictionless operation. The huge reduction in friction, in comparison to all conventional physical contact bearings, allows the ML Series to offer lower noise at higher RPMs giving PC Enthusiasts a true no-compromise fan."

Corsair will offer 10 variants of this new ML Series, with 120 and 140 mm versions in different colors, as well as RGB options (of course!).

Falcon_120_LED_WHT.jpg

Corsair ML120 Pro LED in white (Image credit: Corsair)

"ML Series also provides next-level fan customization. ML PRO fans feature removable color co-coordinated corners fitted to the fan’s vibration dampening rubber grommets, allowing easy color matching to accent your build’s color scheme. ML PRO LED goes even further, mounting four ultra-bright LEDs into the central fan hub to radiate vibrant, even lighting through the fan’s frosted blades."

As to performance, Corsair offers this information from their press release:

"All ML fans offer a huge PWM range, giving users total control over how their fans perform. Value silence above all else? At their lowest speed of 400 RPM, the ML Series will push more airflow at near silent 16 dBA (decibel A-weighting). Performance junkie? ML Series fans push up to 97 CFM (cubic feet per minute) of air. Be it a low noise case, high density radiator or anywhere in-between, the ML Series delivers best-in-class performance."

Corsair provides this video for the launch of the ML Series:

The fans are available immediately, and prices start at $24.99 for a single ML120 Pro fan, with 2-packs of the standard version starting at $34.99

Source: Corsair

BitFenix Introduces Spectre Xtreme Fans for CPU Coolers

Subject: Cases and Cooling | January 14, 2016 - 01:59 PM |
Tagged: bitfenix, case fan, cpu fan, static pressure, air cooling, Spectre Xtreme

BitFenix has introduced a line of Spectre dual-frame fans based on the Pro series with their new Xtreme high static pressure fans. These are made with CPU cooling in mind, and are available in both black (without LEDs) and multiple color LED options.

SX-Blk-MasterImage.png

The Spectre Xtreme fans operate from 950 - 2000 RPM with newly-designed fan blades for airflow up to 66 CFM with "optimum static pressure", making them "an ideal choice for liquid cooling solutions". The fans use fluid dynamic bearings for reduced noise levels, as well as increased efficiency and life expectancy, according to BitFenix.

BFF-SXTR-12025K-RP (1).jpg

"With the introduction of dual frame design of the BitFenix Spectre Pro series we raised the standards of system fans to a new level. The new BitFenix Spectre Xtreme fans offer many features redefining the standards of cooling fans. Spectre Xtreme gives you the best performance and aesthetics using the latest in cooling fan technology and innovative designs.

Cooling fans used in liquid cooling systems not only need to have a high airflow but also they need to be optimized for static pressure. The newly designed blades of the Spectre Xtreme not only look good but also improve the airflow of the fan to 66CFM while maintaining optimum static pressure. This makes the Spectre Xtreme fans an ideal choice for liquid cooling solutions."

79_en.png

In addition to black, the LED versions are available in white, blue, red, and a green color which BitFenix has taken “special care…to match the Green LED with the light emitted from NVIDIA GeForce GTX stock coolers”.

Source: BitFenix

Noctua Announces Some New Fans - During a Brownout?

Subject: Cases and Cooling | May 13, 2014 - 11:05 PM |
Tagged: noctua, fans, cpu cooling, case fan

Noctua, well-known Austrian maker of high-performance fans and CPU coolers, announced two new fan product lines today – and there’s something very different about them.

noctua_nf_s12b_redux_5.jpg

Do not adjust your monitor. These fans are in full color (or lack thereof)

Of some interest here is the “redux” line. True to its name, “redux” is a reissue of some of Noctua’s best-know models but with a very different look. Gone is the trademark brown and tan! Noctua also plans on selling these for “3/4 the price” of the standard models.

According to Noctua’s official statement, “the introduction of the two new product lines allows us to respond to the recurring demands for Noctua fans in different colors." So the voices have been heard. (While I personally don’t mind the old color scheme there are certainly people who do!)

The “redux” lineup will include PWM and 3-pin versions of the existing NF-P14, NF-S12B, NF-B9 and NF-R8, in a gray/darker gray color scheme.

So what of this second new product line? That would be the “industrialPPC” fan lineup with high speed offerings for use in “challenging environments” – and Noctua makes mention of “PC enthusiasts striving for extreme performance”. Sounds like these might warrant some overclocking trials...

noctua_nf_ippc_5.jpg

The industrialPPC lineup consists of “ruggedized” 2000 and 3000rpm versions of the NF-F12 and NF-A14 fans, and they feature an all-black color scheme.

Competition is a good thing, and it’s nice to see Noctua diversify their offerings and offer some lower pricing (with the redux line) in this market, though their fans will still demand a premium price.

Check out Noctua’s official announcement for more information including MSRP’s.

Source: Noctua

NZXT's New "Grid" Hub Can Consolidate Up To 10 Case Fans

Subject: Cases and Cooling | April 19, 2013 - 08:46 AM |
Tagged: nzxt, case fan, fan controller, fan hub, cooling, grid

NZXT has announced that it is making its Grid fan hub available to the masses. No longer only available with certain NZXT cases, the Grid fan hub takes a single Molex power cable and provides 3-pin power outputs for up to ten fans.

The NZXT kit will come with the Grid hub, a 200mm long Molex power adapter, a single 200mm long (3-pin) female-to-female adapter cable, and two 200mm (3-pin) fan extension cables. NZXT is also including five black cable ties to assist with cable management.

NZXT Grid Fan Hub For Up to 10 Case Fans.jpg

Unfortunately, the Grid does not provide functionality to allow adjustable fan speeds. All fans connected to the Grid hub will run at 100% unless other means (such as resistors) are used inline to slow them down. If you only care for speed, and are in a situation where your motherboard does not support enough fan headers but you cannot justify a full fan controller the Grid might be for you. For the price, it is serviceable in that regard.

Speaking of pricing, the Grid fan hub will be available soon with a MSRP of $11.99. More information is available on NZXT's product page.

Is the Grid something that you could see yourself using?

Source: NZXT

Prolimatech PT14015 Fan With 17 Blades Pictured

Subject: Cases and Cooling | December 5, 2012 - 11:30 PM |
Tagged: pt14015, prolimatech, fan, case fan, APL

Prolimatech reportedly has a new fan on the way that is based on the PT12025 fan developed by Prolimatech and Air Propulsion Labratory if photos uncovered by EXPreview hold true. The new PT14015 is a thin 140mm fan that is designed to balance airflow and noise as well as to be compatible with many tower-style heatsinks without blocking the memory slots.

 

Prolimatech PT14015.jpg

The Prolimatech PT14015 is 15mm thick and has 17 14cm-long blades. Interestingly, it has mounting holes that line up with 120mm fans that should increase the compatibility with existing radiators and processor heatsinks. The curved fins have a sharp leading edge, and the 17 moving blades and increased 140mm form factor should make the PT14015 a fairly quiet fan.

There is no word yet on pricing or availability, but EXPreview has several photos of the new fan. As far as fans go, it looks pretty cool (pun intended).

Source: EXPreview