Subject: Cases and Cooling | May 13, 2014 - 11:05 PM | Sebastian Peak
Tagged: noctua, fans, cpu cooling, case fan
Noctua, well-known Austrian maker of high-performance fans and CPU coolers, announced two new fan product lines today – and there’s something very different about them.
Do not adjust your monitor. These fans are in full color (or lack thereof)
Of some interest here is the “redux” line. True to its name, “redux” is a reissue of some of Noctua’s best-know models but with a very different look. Gone is the trademark brown and tan! Noctua also plans on selling these for “3/4 the price” of the standard models.
According to Noctua’s official statement, “the introduction of the two new product lines allows us to respond to the recurring demands for Noctua fans in different colors." So the voices have been heard. (While I personally don’t mind the old color scheme there are certainly people who do!)
The “redux” lineup will include PWM and 3-pin versions of the existing NF-P14, NF-S12B, NF-B9 and NF-R8, in a gray/darker gray color scheme.
So what of this second new product line? That would be the “industrialPPC” fan lineup with high speed offerings for use in “challenging environments” – and Noctua makes mention of “PC enthusiasts striving for extreme performance”. Sounds like these might warrant some overclocking trials...
The industrialPPC lineup consists of “ruggedized” 2000 and 3000rpm versions of the NF-F12 and NF-A14 fans, and they feature an all-black color scheme.
Competition is a good thing, and it’s nice to see Noctua diversify their offerings and offer some lower pricing (with the redux line) in this market, though their fans will still demand a premium price.
Check out Noctua’s official announcement for more information including MSRP’s.
Subject: Cases and Cooling | April 19, 2013 - 08:46 AM | Tim Verry
Tagged: nzxt, case fan, fan controller, fan hub, cooling, grid
NZXT has announced that it is making its Grid fan hub available to the masses. No longer only available with certain NZXT cases, the Grid fan hub takes a single Molex power cable and provides 3-pin power outputs for up to ten fans.
The NZXT kit will come with the Grid hub, a 200mm long Molex power adapter, a single 200mm long (3-pin) female-to-female adapter cable, and two 200mm (3-pin) fan extension cables. NZXT is also including five black cable ties to assist with cable management.
Unfortunately, the Grid does not provide functionality to allow adjustable fan speeds. All fans connected to the Grid hub will run at 100% unless other means (such as resistors) are used inline to slow them down. If you only care for speed, and are in a situation where your motherboard does not support enough fan headers but you cannot justify a full fan controller the Grid might be for you. For the price, it is serviceable in that regard.
Speaking of pricing, the Grid fan hub will be available soon with a MSRP of $11.99. More information is available on NZXT's product page.
Is the Grid something that you could see yourself using?
Subject: Cases and Cooling | December 5, 2012 - 11:30 PM | Tim Verry
Tagged: pt14015, prolimatech, fan, case fan, APL
Prolimatech reportedly has a new fan on the way that is based on the PT12025 fan developed by Prolimatech and Air Propulsion Labratory if photos uncovered by EXPreview hold true. The new PT14015 is a thin 140mm fan that is designed to balance airflow and noise as well as to be compatible with many tower-style heatsinks without blocking the memory slots.
The Prolimatech PT14015 is 15mm thick and has 17 14cm-long blades. Interestingly, it has mounting holes that line up with 120mm fans that should increase the compatibility with existing radiators and processor heatsinks. The curved fins have a sharp leading edge, and the 17 moving blades and increased 140mm form factor should make the PT14015 a fairly quiet fan.
There is no word yet on pricing or availability, but EXPreview has several photos of the new fan. As far as fans go, it looks pretty cool (pun intended).