A unique enthusiast chassis
The Corsair Carbide Air 540 is a very unique case. It fits a full size ATX motherboard and up to four dual-slot graphics cards but it's shorter than you might expect thanks to a design choice that splits the active components from the mostly passive ones. The result is a case that is more square than rectangular yet still combines the charm of Corsair designs with the performance enthusiasts want.
For the best view of the case check out the video review below and then continue on for some additional photos and commentary.
Divided into two side by side compartments, the Air 540 has a unique front style merging a mesh look on the left with matte black paint on the right.
The right hand side includes two 5.25-in optical drive bays turned 90 degrees to fit in the smaller right hand compartment. Honestly, I am looking forward to the day that a case vendor is gutsy enough to leave off optical bays completely in an enthusiast design as I just think they take away from the overall appeal and looks.
Subject: Cases and Cooling | June 3, 2013 - 06:08 PM | Tim Verry
Tagged: corsair, computex 2013, computex, carbide air 540, carbide 330r
Corsair is in attendance at Computex 2013 in Taipei, Taiwan this week to show off a number of new products. The latest product announcement is the release and availability of two new Carbide-series cases: the Carbide Air 540 and Carbide 330R.
Corsair Carbide Air 540 Mid Tower Chassis
The Corsair Carbide Air 540 is a dual chamber mid-tower ATX case that is optimized for maximum air cooling performance. The outside of the case is a boxy brushed aluminum affair with a stylized mesh grill running from the top panel to the front panel. The front panel IO ports sit below the two vertically-mounted 5.25” drives, and includes two USB 3.0 ports, two audio jacks, and power/reset buttons.
The case is split up into two chambers and uses the company's “Direct Airflow Path” techniques. The main (left) chamber hosts motherboards up to E-ATX in size along with PCI-E cards and two hot-swap 3.5” (2.5” drive compatible) drive bays. The second (right) chamber holds the ATX power supply, 5.25” drives, and SSD drive bay (which can hold up to four SSDs). The motherboard tray separates the two chambers, but Corsair has added a number of rubber cable routing grommets to aid in cable management and connecting devices in the main chamber to power.
A magnetic (removable) front filter protects the case from dust. Cooling options include up to six 120mm or five 1400mm fans. Water cooling enthusiasts can instead opt for up to a 240 or 280mm radiator on top and a 360mm radiator in the front of the case.
In all, the case measures 16.5” x 17” x 18” (407 x 432 x 457mm). It is available now with a MSRP of $139.99.
Corsair Carbide 330R Mid Tower Case
The other case that Corsair is launching today is the Carbide 330R. This case focuses on quiet operation and utilizes Direct Airflow Path techniques and sound dampening material throughout.
The Carbide 330R is a compact mid tower case clad in brushed aluminum with tapered edges and sharp corners. The front panel has a brushed aluminum front door, two USB 3.0 ports, two audio jacks, and power and reset buttons. Corsair is optimizing this case for low-noise operation by adding sound dampening material on the top, side, and front panels as well as using rubber case feet to reduce noise caused by vibration.
The Carbide 330R supports motherboards up to E-ATX in size, ATX power supplies, four 3.5” (or 2.5”) drives (in tool free trays), and a single 5.25” tool-less drive bay.
Cooling options include:
- 2 x 120mm or 140mm front panel mounts
- 2 x 120mm or 140mm top panel fan mounts
- 1 x 120mm rear fan mount
Users can remove the top panel cover to reveal the two 140mm fan mounts to add a 240mm watercooling radiator though you do lose out on some of the sound dampening potential when you remove that top panel.
The Carbide 330R measures 19.5” x 8.3” x 19” (495 x 210 x 482mm). It is available now with a MSRP of $89.99.
Get notified when we go live!