Subject: Networking | November 17, 2015 - 05:56 PM | Tim Verry
Tagged: nitroQAM, mu-mimo, gigabit router, broadcom, asuswrt, asus, 802.11ac
Asus has officially launched the RT-AC5300, a massive
replicator tri-band wireless router. The new router is fenced in by eight large antennas that allow the device to support 4 x 4 MU-MIMO wireless on two 5 GHz and one 2.4 GHz bands.
The menacing high-end wireless router supports the latest wired and wireless consumer networking technologies and runs the AsusWRT firmware. The RT-AC5300 is clad in black with red accents. The top of the router is mesh to facilitate cooling. In addition to the eight antennas, there are five gigabit Ethernet ports (up to two ports can be configured as WAN ports), a USB 3.0 port, one USB 2.0 port, and physical buttons for WPS, Wi-Fi, and LED on/off.
Powered by a Broadcom chipset, the router supports 802.11ac as well as older N/G/B Wi-Fi standards. Using NitroQAM technology, the two 5 GHz bands each support up to 2,167 Mbps speeds while the 2.4 GHz band tops out at 1,000 Mbps. This is a boost over the usual 1,734 Mbps for 5 GHz and 600 Mbps for 2.4 GHz wireless bandwidth numbers. Asus claims that the router can run all three bands simultaneously along with beamforming to improve the signal to devices by focusing the signal. Note that the combined advertised "5334 Mbps" of the router includes all three bands but a single device would max out at the 2,167 Mbps theoretical maximum of a single band. The router is capable of automatically figuring out and using the optimal band to communicate with each device based on its capabilities and signal strength.
When it comes to wired connections, the router has four 1 Gbps LAN ports. It also supports 802.3ad link aggregation which allows using two of the gigabit ports to create a single 2 Gbps link to supported devices like network attached storage (NAS) and workstations.
Asus is using ASUSWRT firmware along with AiRadar beamforming, AiProtect security, and a subscription to WTFast GPN which is a service aimed at gamers that reportedly delivers decreased pings and lower latency connections to game servers.
Pricing and availability have not been announced, but CNET is reporting an expected price of $400 USD.
To say that this router is overkill for most is an understatement, but it is packed with features and is ready to stream a Stargate SG-1 marathon to all your devices!
Subject: Motherboards | June 3, 2015 - 09:03 PM | Jeremy Hellstrom
Tagged: msi, z97, h97, LGA1150, broadcom
If you had any worries about being able to use the new Broadwell processors on your LGA 1150 board you can feel much better after this press release from MSI. They have announce full support for Intel's new processors when they arrive on the market, after applying an update to your motherboards Click BIOS 4.
MSI, leading in motherboard design, is proud to announce that our Z97 & H97 motherboards fully support the 5th Generation Intel® Core™ processors! With the latest BIOS update, current MSI Z97 & H97 motherboards are completely compatible with the 5th Gen Intel® Core™ processors, and able to unleash your system’s full performance. Committed to ensuring compatibility and performance, the MSI R&D team is making sure you never have to worry about your MSI Z97 & H97 motherboard supporting the latest generation of Intel® Core™ processors. If you want to fully enjoy all the advantages of the 5th Generation Intel® Core™ processors, MSI Z97 & H97 motherboards are definitely your best choice.
Click BIOS 4, the highly-awarded UEFI design
MSI Click BIOS 4 is optimized for the 5th Generation Intel® Core™ processors. The highly awarded design is reliable, easy to use, and able to unleash your system’s performance. Besides providing great performance and stability, MSI Click BIOS 4 is recognized as an extraordinary piece of kit which allows you to fully customize your PCs setup.
Subject: Editorial, General Tech | December 8, 2013 - 09:11 AM | Scott Michaud
Tagged: TSMC, GLOBALFOUNDRIES, broadcom
Josh Walrath titled the intro of his "Next Gen Graphics and Process Migration: 20nm and Beyond" editorial: "The Really Good Times are Over". Moore's Law predicts that, with each ~2 year generation, we will be able to double the transistor count of our integrated circuits. It does not, however, set a price.
A look into GlobalFoundries.
"Moore's Law is expensive" remarked Tom Kilroy during his Computex 2013 keynote. Intel spends about $12 billion USD in capital, every year, to keep the transistors coming. It shows. They are significantly ahead of their peers in terms of process technology. Intel is a very profitable company who can squirrel away justifications for these research and development expenses across numerous products and services.
The benefits of a process shrink are typically three-fold: increased performance, decreased power consumption, and lower cost per chip (as a single wafer is better utilized). Chairman and CTO of Broadcom, Henry Samueli, told reporters that manufacturing complexity is pushing chip developers into a situation where one of those three benefits must be sacrificed for the other two.
You are suddenly no longer searching for an overall better solution. You are searching for a more optimized solution in many respects but with inherent tradeoffs.
He expects GlobalFoundries and TSMC to catch up to Intel and "the cost curve should come back to normal". Still, he sees another wall coming up when we hit the 5nm point (you can count the width or height of these transistors, in atoms, using two hands) and even more problems beyond that.
Image Credit: IONAS
From my perspective: at some point, we will need to say goodbye to electronic integrated circuits. The theorists are already working on how we can develop integrated circuits using non-electronic materials. For instance, during the end of my Physics undergraduate degree, my thesis adviser was working on nonlinear optics within photonic crystals; waveguides which transmit optical frequency light rather than radio frequency electric waves. Of course I do not believe his research was on Optical Integrated Circuits, but that is not really the point.
Humanity is great at solving problems when backs are against walls. But, what problem will they try?
Power consumption? Cost? Performance?
Subject: Editorial, General Tech | May 8, 2012 - 04:39 AM | Ryan Shrout
Tagged: netgear, giveaway, contest, broadcom, 802.11ac
Broadcom and Netgear came to PC Perspective recently to discuss some upcoming products based on the new 802.11ac protocol, a new technology that will enable a minimum of 1 Gigabit wireless networking in the 5 GHz spectrum.
While we are learning about the new products that the two companies are partnering on, they offered up a few prizes for our readers: one of three new Netgear R6300 dual-band, 802.11ac routers!!
While not on the market yet, these routers will offer some impressive new features including:
The NETGEAR R6300 WiFi Router delivers next generation WiFi at Gigabit speeds. It offers the ultimate mobility for WiFi devices with speeds up to 3x faster than 802.11n.
Compatible with next generation WiFi devices and backward compatible with 802.11 a/b/g and n devices, it enables HD streaming throughout your home. The R6300 with simultaneous dual band WiFi technology offers speeds up to 450+1300‡ Mbps† and avoids interference, ensuring top WiFi speeds and reliable connections. This makes it ideal for larger homes with multiple devices. In addition, four Gigabit Ethernet ports offer ultra-fast wired connections. Wirelessly access and share USB hard drive and USB printer using the two USB 2.0 ports.
The NETGEAR Genie® app provides easy installation from an iPad®, tablet, computer or smartphone. It includes a personal dashboard, allowing you to manage, monitor, and repair your home network. NETGEAR customers can download the app at http://www.netgear.com/genie or from the Google Play or App Store.
All you have to do to enter this contest is submit your answer the question below and be sure to include your REAL email address so we can contact you!! The survey will run through the rest of this week (May 11th) and you can enter from all over the world! They had one simple question:
Subject: General Tech, Systems | January 26, 2012 - 04:45 PM | Tim Verry
Tagged: Raspberry Pi, linux, htpc, hd, gpu, broadcom
As reported earlier, the Raspberry Pi is a small computer intended to run Linux and is made to be portable and able to be powered by USB. The small board is based on the Broadcom BCM2835 chipset, which includes an ARM 11 CPU and a dual core VideoCore IV graphics card co processor. The Raspberry Pi further includes connections for HDMI, component output, and USB ports. The higher tier $35 model will further feature an Ethernet jack and twice the RAM (512 MB).
The Raspberry Pi will soon be available for sale and if the company behind the device- The Raspberry Pi Foundation- is to be believed, the GPU in the little Linux computer will pack quite a punch for its size (and cost). In a recent Digital Foundry interview with Raspberry Pi Executive Director Eben Upton reported on by Eurogamer, Upton made several claims about the Raspberry Pi’s graphics capabilities. He explained that the Broadcom BCM2835’s VideoCore IV GPU is a tile mode architecture that has been configured with an emphasis on shader performance. Upton said “it does very well on compute-intensive benchmarks, and should double iPhone 4S performance across a range of content."
The comparison to the iPhone 4S relates to his further claims that the Raspberry Pi GPU is the best on the market and can best both the iPhone 4S’s PowerVR (Imagination Technologies) based graphics and even the mighty Tegra 2 in fill rate performance. Rather large claims for sure; however, we do have some independent indication that his claims may not be wholly inflated. The coders behind XBMC, open source media center software that allows users to play a variety of media formats, have demonstrated their XBMC software running on the Raspberry Pi. They showed the Raspberry Pi playing a 1080p blu ray movie at a smooth frame rate thanks to the Broadcom GPU being capable of 1080p 30 FPS H.264 hardware accelerated decoding. You can see the Raspberry Pi in action in the video below.
The little Raspberry Pi is starting to look quite promising for HTPC (and even light gaming) use, especially for the price! At $25 and $35 respectively, the Raspberry Pi should see quite the following in the modding, enthusiast, and education community.