Subject: Cases and Cooling | June 13, 2014 - 11:31 PM | Sebastian Peak
Tagged: enclosure, computex 2014, computex, cases, bitfenix pandora, bitfenix atlas, bitfenix aegis, bitfenix
Yes, Computex is over - and in its wake we’re still left with a ton of new product announcements. Three of these come from BitFenix, who unveiled new enclosures at their booth in Taipei last week.
The first is the BitFenix Atlas, which has incorporated some interesting design features including what they are calling “swappable chambers” and a “test-mode motherboard tray”. (Could this be an open test-bench feature?)
The design is very interesting (a bit along the lines of the Corsair Carbide Air 540), and the extra width allows for no less than ten 3.5” hard drive bays behind the motherboard tray! The Atlas also has six 2.5” bays for SSDs, and features a full array of dust filters and nifty RGB lighting.
Next we’ll look at the Aegis, a sleek minitower enclosure.
The Aegis supports micro-ATX and mini-ITX motherboards and features water cooling support and a built in fan controller. In addition to 240/280mm radiator support on the top, the Aegis also boasts 360mm radiator support up front.
Finally we have the Pandora, which in addition to streaming music (as I’ve been informed) is also apparently a PC case that looks like part of a stormtrooper’s armor.
Besides protecting imperial troops from rebel attacks, the Pandora offers a stylish take on a mini-ITX tower design and offers support for full-size ATX power supplies and (presumably) liquid cooling via two pairs of 120mm fan mounts.
No specifics on pricing or availability from BitFenix on these three new enclosures just yet, but expect them this year as they are part of the 2014 BitFenix catalog.
Subject: Cases and Cooling | April 30, 2014 - 12:16 PM | Sebastian Peak
Tagged: Power Supplies, modular psu, bitfenix
BitFenix, well known among system builders for their sizeable lineup of enclosures, today announces a new line of power supplies. The “Fury” PSU’s are will be offered in 550W, 650W, and 750W versons, and feature 80 PLUS Gold certification. What’s special about them? They come pre-sleeved with braided cables for a custom look.
TechPowerUp has a review of the 750 watt model up, and though the power supply performed respectably they had reservations on the reported MSRP of $169 (though no official prices have been released). BitFenix says the PSU’s will carry a 5-year warranty, which should make investing in the Fury a bit more palatable.
Not interested in shelling out for a fancy-looking PSU just yet? The folks at Performance-PCs.com are already offering a giveaway on their Facebook page.
The Fury line is set to be released in May, and we’ll see soon enough what kind of demand there is for a PSU with a premium on style in a very crowded market.
The BitFenix Fury Power Supply Series delivers a trifecta of performance, reliability, and aesthetics like no other PSU before it. From the brushed aluminum accents and stamped BitFenix logos, to the metallic fan grill and powder coated exterior, Fury is the first PSU designed to not be hidden away, but shown off. The semi-modular design allows for better cable management, and the cables themselves are sleeved with Alchemy sleeving for a premium look. Beyond good looks, Fury delivers the performance and reliability demanded by today's modern hardware with 80Plus Gold certification, single-rail power delivery, and active power factor correction. Equipped with exclusive BitShield™ Six-Point Protection and a five-year warranty, users can count on Fury to power their systems day-in and day-out.
Nanosleeve™ Braided Cables
With an ultra-dense weave and superb flexibility, the Nanosleeve braiding found on our Alchemy cable extensions is the premier choice of the world's top modders. The cable that come with Fury are pre-sleeved with this exact sleeving - no more voiding your warranty and spending hours sleeving cables yourself. With Fury, you get that premium modded look straight out-of-the-box.
Introduction, Packaging, and Specifications
The BitFenix Colossus has grown into a family of enclosures, from the massive E-ATX original all the way down to their diminutive mini-ITX version. But somewhere in between there lies a case offering some impressive flexibility, while still retaining a small footprint.
As the PC industry has evolved over the last decade, the days of high-performance rigs requiring large towers and full-size ATX and E-ATX motherboards are gone. Of course there is still a market (and need) for full tower systems, and the majority of enthusiast motherboards available are still full ATX. But the evolution in process technology and platforms has allowed for more and more to be done within a smaller footprint, and the micro-ATX form factor has emerged as a solid option for anything from budget systems to extreme multi-GPU gaming powerhouses. Regardless of the path you choose, all of those sweet components need a home, and finding the right computer case has long been a very personal odyssey.
BitFenix entered the PC enclosure market in 2010 with the original Colossus, and since then they have grown into a respected brand with a large and differentiated product offering. From that first massive Colossus to the popular Prodigy mini-ITX, they have created an enclosure for just about any build. And while many cases specialize in one or two particular areas, once in a while you will find an enclosure that just begs for experimentation. The micro-ATX variant of the Colossus from BitFenix is just such a case. Every aspect of this small enclosure has been given a close look by BitFenix, and there are options galore for a variety of builds.
Subject: Cases and Cooling | June 27, 2013 - 04:23 PM | Tim Verry
Tagged: ronin, mid-tower, bitfenix
PC Chassis manufacturer BitFenix has launched its new Ronin mid-tower ATX case. It will be available in July and carries a clean matte black aesthetic with many of the useful features that enthusiasts expect to see in today’s cases.
The BitFenix Ronin measures 270 x 560 x 530mm (approximately 10.6 x 22 x 20.9-inches), and is constructed of steel and plastic. BitFenix uses its “SoftTouch” micro texture surface treatment to give the matte black exterior a unique look and feel. The exterior is all matte black with an acrylic side window. A mesh design is used along the top and front panels, and aids in ventilation. The case uses rounded corners. The front panel IO is actually on the top-front of the case and includes two USB 3.0, two USB 2.0, and two audio ports along with the requisite power button. Other than that, the case is rather simplistic in design, which isn’t necessarily a bad thing.
The case can accommodate ATX, Micro ATX, and Mini-ITX motherboards. Internal features include tool-less drive cages, filtered front and bottom intake fan filters, cable management and CPU backplate cut-outs, water cooling grommets, and a bottom mounted power supply. BitFenix is also offering a piece of material that will cover up the PSU and drive cages to hide the drives and cables from the side window view.
The case can host up to three 5.25” drives and six 2.5” or 3.5” hard drives. There are 7 PCI slots and plenty of ventilation spots for fans. Specifically, cooling options include two bundled 120mm Spectre fans. Users can further expand the air cooling by adding the following fan(s).
- Top: 2 x 140mm
- Front: 2 x 120mm
- Bottom: 1 x 120mm
- Rear: 1 x 120mm
Further, when removing a drive bay, users can use up to 420mm long graphics cards.
The BitFenix Ronin will be available next month for an as-yet-announced price. For reference, it's model number is BFC-RON-300-KKWSK-RP. More information can be found here.
Subject: Cases and Cooling | November 28, 2012 - 01:11 AM | Tim Verry
Tagged: white, portable case, case, bitfenix, atx
BitFenix recently announced a new mid-tower computer chassis aimed at gamers and enthusiasts that want a portable PC that easily hosts a full ATX motherboard. Specifically, BitFenix has taken its Survivor case and made an edition clad in white that it has dubbed the Survivor White.
The case features a carrying handle that folds down into the top of the case when not in use, making it easier to carry to LAN parties. It is completely white minus a blue LED-lit BitFenix logo on the front, and features curved edges. There is space for two 200mm fans or three 120mm fans around the case. Also, the new Survivor has three 5.25” expansion bays, holes for passing water cooling tubes though the back panel, a bottom mounted power supply cutout, dust filters, and a hidden IO panel. The front IO includes the power and reset buttons, two USB 2.0 ports, two USB 3.0 ports, microphone and headphone jacks, and a single eSATA port. It also has on/off controls for the LED light for the BitFenix logo and for any BitFenix Spectre Pro LED fans (not included).
On the inside of the Survivor-series chassis, you will find a removable hard drive cage, CPU cutout on the motherboard tray, and cable management grommets. The inside of the case is the same white color as the outside, and the hard drive cage features tool-less mounting brackets. These are all things that are coming standard on enthusiast cases these days, but are nice to see nonetheless (especially for the price). With the hard drive cage installed, the case can hold up to seven 2.5” SSDs or six 3.5” hard drives.
BitFenix has stated that the white colored Survivor case will be available at the end of November for $109 USD or 99€ (including 19% VAT).
What do you think about the new Survivor SKU?
Subject: Cases and Cooling | October 19, 2012 - 06:22 PM | Jeremy Hellstrom
Tagged: bitfenix, Hydra Pro, Recon, fan controller
One of the best ways to bring down the noise your system generates without switching to alternate cooling methods is to install a fan controller in your system so that you can control the speed your fans run at and slow them when you don't need the extra cooling. Hardware Canucks finished a video review of two fan controllers from BitFenix, the basic five channel Hydra Pro and the Internet enabled, touch screen Recon which offers far more control than the analog Hydra Pro. Neither controller costs more than $50, check out the review and see which would fit your system best.
"Fan controllers may not be a marquee item within many enthusiasts’ systems but the power they grant over airflow within a case cannot be underestimated. BitFenix's Hydra Pro and Recon controllers hail from very different ends of the spectrum but they both grant end users complete control over their system fans."
Here are some more Cases & Cooling reviews from around the web:
- Cooler Master Hyper 412 PWM and Deepcool GAMMAXX 400 Coolers
- SilverStone Heligon Series HE01 CPU Cooler Review @ HardwareHeaven
- Be Quiet! Dark Rock 2 CPU Cooler Review @ eTeknix
- Reeven Kelveros (RC-1202) CPU Cooler Review @ eTeknix
- Zalman CNPS14X Lower Noise Heatsink Review @ Frostytech
- SilverStone HE02 CPU Cooler Review @ Hardware Secrets
- Xigmatek Dark Knight SD1283 Night Hawk Ed. Ceramic Coated Heatsink Review @ Frostytech
- Zalman CNPS9900DF Dual Fan Flower Heatsink @ Silent PC Review
- SilverStone Heligon HE02: Monster Fanless CPU Cooler @ Silent PC Review
- Cooler Master Hyper 412 Slim CPU Cooler Review @ eTeknix
- Zalman CNPS9900DF @ Frostytech
- Noctua NF-F12 PMW 120mm Fan @ lanOC Reviews
- Swiftech MCR240-QP "Quiet Series" Dual 140mm Radiator @ Tweaktown
- Swiftech Apogee Drive II Integrated Pump and Waterblock @ Tweaktown
- Cougar Challenger Mid Tower @ Kitguru
- Enermax Ostrog Mid-Tower PC Chassis Review @ eTeknix
- CM Storm Scout 2 Case Review @ OCC
- Nanoxia Deep Silence 1 @ Guru of 3D
- In-Win GRone Full Tower Chassis Review @ Legit Reviews
- Cooler Master Elite 120 Advanced @ LanOC Reviews
- NZXT Phantom 820 Full Tower Case Review @ Hi Tech Legion
- NZXT Phantom 820 Full-Tower Chassis Review @ eTeknix
- Cooler Master Elite 120 Advanced @ Kitguru
- NZXT Phantom 820 Case Review: Everything, Everything @ AnandTech
- Lian li PC-Q25 ITX Case @ XSReviews
- Nanoxia Deep Silence 1 @ techPowerUp
- Fractal Design Node 304 Mini-ITX PC Chassis Review @ eTeknix
- Cougar Challenger ATX @ SSD Review
- Cougar Challenger Mid-Tower ATX Gaming Case Review @ HCW
- In Win H-Frame Case Review @ Hardware Secrets
- Xigmatek Pure Black Asgard Pro Case Review @ Pro-Clockers
- BitFenix Prodigy @ Bjorn3D
- Nanoxia Deep Silence 1 Mid-Tower Chassis Review @ eTeknix
Subject: Cases and Cooling | August 12, 2011 - 06:39 AM | Tim Verry
Tagged: mid tower, chassis, bitfenix, atx
Gaming hardware designer BitFenix recently announced two new computer chassis. Named Merc Alpha and Merc Beta, both enclosures are of the mid-tower ATX design and deliver gaming features for budget prices. Product Manager David Jarlestedt stated confidently that “gamers will be hard pressed to find a better value enclosure in this segment.”
The differences between Merc Alpha and Merc Beta are subtle but important for cooling potential. Specifically, Merc Alpha is able to accommodate up to eight 120mm fans (including two on top) while the Merc Beta eschews the two top 120mm fan grills in favor of a flat surface and a total of six fans.
Features shared between both models include an all black interior and exterior coating, black cabling for the front ports, cable management features, CPU cooler motherboard cut-out, four USB 2.0 front panel ports, and easy to use thumbscrews to secure the case door and internal drives. Further, the cases support three 5.25” optical drives, seven 3.5” hard drives, and one 2.5” drive bay for an SSD.
Both Merc Alpha and Merc Beta will be available in stores starting August 2011 with an MSRP of $39. You can see more photos of the budget gaming cases here.
Subject: Cases and Cooling | June 29, 2011 - 01:32 PM | Jeremy Hellstrom
Tagged: bitfenix, shinobi window
BitFenix's Shinobi Window is anything but a high end case, more in line with some of NZXT's offerings which include as many features as possible while staying under the $100 mark. The USB and audio connectors, as well as the power button have all been moved to the top of the case, along with a large exhaust area which is wide open as this mid-tower case has the PSU located on the bottom. The side panel does indeed have a window and the motherboard tray has a hole cut into it for easy access to your heatsinks backplate. Tool-less assembly and wire management features are included as are grommets for watercooling. The Tech Report does make mention of the non-windowed version which costs $10 less and might be even more attractive to the value conscious case shopper.
"We're taking an in-depth look at the Shinobi Window, a mainstream mid-tower enclosure from the folks at Bit Fenix. We've run the case through our usual battery of tests to determine if it's a worthy contender at $70."
Here are some more Cases & Cooling reviews from around the web:
- SilverStone Grandia GD06 Case Review @ Hardware Secrets
- Thermaltake Level 10 GT Review @ HardwareLOOK
- Silverstone Raven RV03 Case Review @ Hardware Canucks
- Antec KUHLER H2O 920 CPU Cooler Review @ eTeknix
- ThermoLab Trinity Ultra-Quiet CPU Cooler Review @ eTeknix
- Cooler Master HAF 932 Advanced @ Overclockers Online
- Gaming Cases from NZXT: Phantom and Vulcan @ X-bit Labs
- Enermax SpineRex @ techPowerUp
- Sentey Burton Full-Tower Computer Case @ Benchmark Reviews
- Antec KÜHLER H2O 620 Review @ HardwareLOOK
- Scythe Attacks: Mine 2 Super-Cooler @ X-bit Labs
- Giant from Scythe: Susanoo CPU Cooler @ X-bit Labs
- Zalman CNPS7X LED CPU Cooler Review @ Hardware Secrets
- NZXT Havik 140 CPU Cooler Review @ ThinkComputers
- Coolink Corator DS @ Hardware Bistro
- Noctua Ultra Silent 140mm NF-P14 FLX Fan @ reviewstash
Subject: Cases and Cooling | June 13, 2011 - 12:25 PM | Jeremy Hellstrom
Tagged: bitfenix, colossus venom
We have been seeing a lot of Bitfenix's work recently, Steve reviewed their Colossus E-ATX case and there have been sightings of the smaller Survivor and Shinobi cases at other sites. R&B Mods has a look at a modified version of the Colossus called the Venom which features 5 glowing stripes on the outside of the case which glow red and green depending on your taste ... or disabled. Don't be scared off by the aesthetics of the case if you are not a fan of glowing lights, the case is deep enough to handle most coolers and long enough to handle high end video cards. There are numerous grommets for watercooling loops and cable management as well as properly implemented tool-less assembly.
"Today we will take a look at the Colossus Venom Edition enclosure made by Bitfenix. It is based on the same case as the normal Colossus but with some extra bits added to it. Let’s take a closer look what it has to offer and how it performs!"
Here are some more Cases & Cooling reviews from around the web:
- Cooler Master Silencio 550 Chassis Review @ eTeknix
- Silverstonetek PS05 System @ Metku.net
- Thermaltake Level 10 GT Full Tower Case Review @Hi Tech Legion
- Antec Six Hundred V2 Review @ Neoseeker
- NZXT Classic Series H2 @ Tweaktown
- NZXT H2 Silent Mid-Tower Chassis Review @ Techgage
- Azza Toledo 301 Mid Tower Case Review @Hi Tech Legion
- BitFenix Survivor Case Review @ Hardware Secrets
- Corsair Obsidian 650D Mid-tower Chassis Review @ OCIA
- Corsair Graphite Series 600T White Case Review @ Hardware Secrets
- EVGA Superclock CPU Cooler Review @ Legit Reviews
Get notified when we go live!