Be Quiet! Silent Base 600 Coming In September

Subject: General Tech | June 12, 2015 - 01:49 AM |
Tagged: silent pc, mid-tower, computex 2015, computex, be quiet!, be quiet

Be Quiet unveiled the Silent Base 600 at Computex last week which is the company's second PC case. It is a smaller, quieter, and cheaper version of the existing Silent Base 800 while maintaining the same design and emphasis on noise reduction. Available in September, Be Quiet! is offering this mid tower case in both a side panel and windowed version at $99 and $115 respectively.

The Silent Base 600 is black with angled edges and a brushed metal front panel. It sits on four case feet that lift it up slightly to improve airflow. A panel on the front hides three 5.25" bays while the front IO sits along the top edge and two large vertical grilles act as front intakes. The side panel(s) have an adjustable height vent to increase or decrease airflow. A fan can be attached to the side panel (the window version of the case does not have vents) and users can adjust the intake around the edges of the vent to balance airflow and noise. Two Be Quiet! Pure Wings 2 fans come pre-installed (one 120mm in the rear and one 140mm front intake fan) and users can additionally install up to two 120/140mm fans up top, one 120mm side panel fan, one 140mm bottom mounted fan, and an extra 140mm front intake fan for a total of seven fans (or six if you opt for the windowed model). Be Quiet provides removable filters on all the intakes which is a nice touch.

be-quiet-silent base 600 black with side window.jpg

Check out Gamer's Nexus for more photos from be quiet!'s Computex booth!

Front I/O on the Silent Base 600 includes two USB 3.0, two USB 2.0, two audio jacks, and an integrated fan controller. Be Quiet! continues to emphasis noise reduction with the inclusion of sound dampening material in the side panels, rubber mounts for the tool-less drives, and rubber mounts for the included fans to reduce vibration noise.

The Silent Base 600 will be available in black, silver, and orange colors. The color options get you accents around the front grilles and rubber cable management grommets in your chosen color among other color tweaks.

Internally, the Silent Base 600 has room for ATX motherboards, bottom mounted power supplies (290mm max), CPU coolers up to 170mm tall, and up to 400mm long graphics cards. Storage is handled by three 5.25", three 3.5", and two 2.5" drive bays. Other features include three rubber grommets to support external water cooling radiators, grommets in the motherboard tray to help with cable management, an optional fan controller to control an additional three fans, and seven PCI expansion slots should you be so inclined.

In all, it looks like a good base for an extremely quiet PC though I would have liked to see 360mm radiator support so that I could finally upgrade my case and move my radiator inside (heh). I'm looking forward to the reviews and seeing how well the noise reduction tweaks work.

Jimmy Thang (from Maximum PC) was able to check out the new case at Computex 2015 and you can watch their video with Chris from be quiet! on YouTube.

What do you think about Be Quiet!'s new mid tower case?

Thermaltake Announces Haswell-Compatible Power Supplies

Subject: Cases and Cooling | May 21, 2013 - 11:52 PM |
Tagged: be quiet, Power Supplies, haswell, Intel, c6, c7

In addition to Be Quiet!, Thermaltake has announced its own list of Haswell-compatible PSUs. The majority of high end Thermaltake power supplies will work with Haswell and its new sleep states. Further, all of the current generation high-end and mid-range Thermaltake power supplies are compatible with the new CPUs.

Power supplies in the Toughpower, EVO, and Smart M family are compatible with Haswell. Specifically, the chart below details which specifc models are compatible with Haswell and the new C6 and C7 low power sleep states.

Thermaltake Haswell PSU List.jpg

The following companies have also listed Haswell-compatible power supplies:

German PSU Manufacturer Be Quiet! Lists Its Haswell-Ready Power Supplies

Subject: Cases and Cooling | May 21, 2013 - 10:50 PM |
Tagged: sleep state, PSU, Power Supplies, haswell, c7, c6, be quiet

Be quiet!, a power supply manufacturer based in Germany, has announced that almost all of its recent power supply lineups are fully compatible with Intel's upcoming Haswell processors. The PC Perspective team has talked in-depth about the new C6 and C7 sleep states used by Haswell CPUs. However, for the uninitiated, the new Intel processors have two new low power sleep states. The lowest state, C7, draws as little as 0.05A from the 12V PSU rail. That is a good thing, but not all power supplies will be compatible with the new sleep states as such low load on the 12V rail was not a concern when the PSUs were designed and manufactured. Notably, even incompatible power supplies will still work in Haswell systems, but those computers will not be able to enter the lower-power C6 and/or C7 sleep states.

Be Quiet Dark Power Pro 10 PSU.jpg

There is good news for users of Be Quiet! Power supplies, however. The following power supplies are fully compatible with Haswell and the new sleep states:

  • Dark Power Pro 10 Series (all models)
  • Straight Power E9 Series (all models)
  • Pure Power L8 Series (all models)
  • System Power 7 Series (all models)
  • Pure Power L7 Series (the 630W and 730W models only)

Older Be Quiet! power supplies will still work in Haswell systems, but use of the lowest power C7 state is not recommended. Fortunately, most desktop users can live without the new low power states (which, while nice to have, the new sleep states are more beneficial to laptop users).

As the launch of Haswell approaches, more and more PSU manufacturers are releasing compatibility information. So far, the following companies have put together compatibility lists.