Subject: General Tech | November 13, 2015 - 12:55 PM | Jeremy Hellstrom
Tagged: battery, quantum dots, iron pyrite
Earlier this month we saw researchers seeing success by mixing air into lithium ion based batteries and today we hear of a different experiment aimed at increasing battery life. As was discussed in the previous article the inevitable formation of crystals inside the battery is what prevents a battery from fully recharging and eventually being unable to hold any charge whatsoever. Researchers have experimented with adding millions of iron pyrite quantum dots of varying sizes to lithium and sodium ion batteries and found they can make cells which charge more quickly than standard cells and survive more recharging cycles. There is still a lot of work to be done, if you are interested in reading up on the research you can follow the links from Slashdot.
"The problem is that when the size of the crystals drop below a certain size they begin to react chemically with the electrolytes which prevents them from recharging. Now, however, a team of engineers from Vanderbilt University report in an article published in the journal ACS Nano that they can overcome this problem by making the nanocrystals out of iron pyrite, commonly known as fool's gold."
Here is some more Tech News from around the web:
- openSUSE Leap 42.1 Review: The Most Mature Linux Distribution @ Linux.com
- Microsoft rolls out first 'major update' to Windows 10 @ The Register
- Linux brings together the supercomputing community to form OpenHPC @ The Inquirer
- Samsung unveils Exynos 8890 processor built using 14nm FinFET process @ DigiTimes
- Samsung sells off LCD equipment in move towards OLED production @ The Inquirer
- Intel & Microsoft Encourages Consumers To Make Magic @ TechARP
- Marvelous Machinima: Valve Open Saxxy Award Voting @ Rock, Paper, SHOTGUN
- Microsoft creates its own movie moment with fancy privacy manifesto @ The Register
- Ransomware 101 With Trend Micro @ TechARP
- Yes, We Really Built the Flaming Sword from Fallout 4 @ MAKE:Blog
Subject: General Tech | November 6, 2015 - 12:48 PM | Jeremy Hellstrom
Tagged: Li-air, battery
Many great discoveries happen accidentally, when a scientist is attempting to create a new material or upgrade an existing one, only to stumble upon something different or to achieve the desired results in an unexpected way. Such was the case for K M Abraham who was trying to improve the performance of LiOn batteries when one of his batteries sprung a leak and allowed air into the cells. Over the past twenty years we have barely managed to triple the power of batteries so any advancement in battery technology is welcome even ones which seem at first to have serious drawbacks. The problem with this particular battery design is in the formation of Li2O2 deposits as the battery discharges which will eventually render the battery nonchargeable and useless. Read on at The Register to see how that problem has been overcome and the possible uses of this new type battery.
"Rather than try to fix the leak, Abraham investigated and discovered the first rechargeable lithium-air (Li-air) battery. So far this discovery hasn’t led to any technically viable products, but a paper published in Science from a University of Cambridge research group may be about to change that."
Here is some more Tech News from around the web:
- Signups start at 'Windows Store for Business' @ The Register
- Latest Android adware threat is 'virtually impossible' to remove @ The Inquirer
- Dell and HP tech support staff are telling customers to ditch Windows 10 @ The Inquirer
- Linus's Thoughts on Linux Security @ Slashdot
- 3D Printed Objects Found Toxic To Fish Embryos @ Slashdot
- NikKTech & Biostar Kick Off Your New Build Worldwide Giveaway
Subject: General Tech, Mobile | June 26, 2015 - 04:53 PM | Scott Michaud
Tagged: Samsung, battery
When I was in my Physics program, there was a running joke that the word “Nano” should be a red flag when reading research papers. This one has graphene and nanoparticles, but it lacks quantum dots and it looks privately funded by a company, so we might be good. Kidding aside, while I have little experience with battery technology, they claim to have surrounded silicon anodes for lithium batteries with a layer of graphene.
Image Credit: Samsung via Nature
This addition of graphene is said to counteract an issue where silicon expands as it is used and recharged. The paper, which again is the first source that I have seen discuss this issue, says that other attempts at using silicon adds vacant space around the anode for future growth. If you can keep the material at the same volume over its lifespan, you will be able to store more electricity in smaller devices. I wonder why Samsung would want something like that...
Upgrades from Anker
Last year we started to have a large amount of mobile devices around the office including smartphones, tablets and even convertibles like the ASUS T100, all of which were charged with USB connections. While not a hassle when you are charging one or two units at time, having 6+ on our desks on any day started to become a problem for our less numerous wall outlets. Our solution last year was Anker's E150 25 watt wall charger that we did a short video overview on.
It was great but had limitations including different charging rates depending on the port you connected it to, limited output of 5 Amps total for all five ports and fixed outputs per port. Today we are taking a look at a pair of new Anker devices that implement smart ports called PowerIQ that enable the battery and wall charger to send as much power to the charging device as it requests, regardless of what physical port it is attached to.
We'll start with the updated Anker 40 watt 5-port wall charger and then move on to discuss the 3-port mobile battery charger, both of which share the PowerIQ feature.
Anker 40 watt 5-Port Wall Charger
The new Anker 5-port wall charger is actually smaller than the previous generation but offers superior specifications at all feature points. This unit can push out more than 40 watts total combined through all five USB ports, 5 volts at as much as 8 amps. All 8 amps can in fact go through a single USB charging port we are told if there was a device that would request that much - we don't have anything going above 2.3A it seems in our offices.
Any USB port can be used for any device on this new model, it doesn't matter where it plugs in. This great simplifies things from a user experience point of view as you don't have to hold the unit up to your face to read the tiny text that existed on the E150. With 8 amps spread across all five ports you should have more than enough power to charge all your devices at full speed. If you happen to have five iPads charging at the same time, that would exceed 8A and all the devices charge rates would be a bit lower.
Subject: General Tech | December 6, 2011 - 01:37 PM | Ryan Shrout
Tagged: battery, ups, eaton, 3s, just delivered
Just Delivered is a new section of PC Perspective where we share some of the goodies that pass through our labs that may or may not see a review, but are pretty cool none the less.
Sometimes computer technology isn't sexy - but you need it anyway. Just look at items like optical drives (debatable), floppy discs and ZIP drives? Amiright? An uninterruptible power supply (UPS) is just one of those items. You might not want to think about it, but you should have one, even for gamers and general PC users.
Ever been working on a school document or maybe even a really detailed rage post on your favorite forum and had the power flicker and your PC reset, losing hours and hours of work you put into telling that moron why your GPU was better? If so, or if you can imagine the frustration, then you know why having even just a few minutes of battery time on a desktop computer can be critical.
We recently picked up the Eaton 3S battery backup which you can find online for as little as $70 - quite a steal for the peace of mind you'll get for having it. Yes, if you are gaming on a PC using more than 450 watts when the power outage occurs, you are probably screwed. If you are doing basically anything else, almost any desktop configuration should be good to go.
The Eaton 3S 750VA model includes 5 outlets for battery backup and 5 more that are surge protection only. The power button light changes colors depending on the units status and is a very basic indicator of your current power situation.
The 3S has network surge protection as well as a USB port to connect tor your PC should you wish to use the Eaton Intelligent Power Protector software that enables features like graceful shutdown (if you are away from your PC when the power outage occurs). You don't have to use that software though, and the unit will operate on a completely plug-and-play fashion using Windows, Mac or Linux integrated power management software.
The unit can be wall mounted which is nice if you have limited floor space.
The battery in the unit is user replaceable which is a nice change of pace and could lower your maintenance costs down the road for this UPS. Eaton actually offers a 3-year warranty on both the unit AND THE BATTERY; something that other companies like APC do not (as I have first had experience with).
The amount of runtime you will get with a UPS like this will obviously vary based on your hardware setup and while Eaton estimates "between 10 and 30 minutes" I would wager it would be slightly less than that for our readers. Still, a few minutes is better than NO minutes so consider this Just Delivered to double as a PC Perspective PSA.
Subject: General Tech | June 27, 2011 - 01:49 PM | Jeremy Hellstrom
Tagged: linux, ASPM, battery
The recent release of the 2.6.38 Linux kernel has lead to many complaints from mobile users who find their battery life noticably reduced. Phoronix noticed the issue a while back but until now had not completed enough investigation to be able to pinpoint the cause. With the arrival of a power monitor they are now willing to point a finger at Active-State Power Management for PCI Express and BIOS compatibility as the cause. While the desktop users enjoy an increase in speed in certain applications that require their PCIe lanes to be going full out, mobile users notice the drain on the battery as the PCIe lanes take as much power as they can whether they need it or not. For mobile users whose top priority is power savings, it is recommended that you stick with a pre-2.6.35 kernel as there are also power issues related to that build. Phoronix does offer a possible solution for some users in their article if you do need to use the latest build.
"Mobile users are urged to seriously consider these results, and possibly even avoid the Natty Narwhal...I hate to say it, especially in an Ubuntu review, but the mobile edge goes to Windows for now...There are also compelling reasons for folks to avoid [Ubuntu 11.04] at all costs. Linux gamers should see substantial improvements, while mobile users suffer a dramatic loss in battery life," were among the critical comments that Tom's Hardware had in their Ubuntu 11.04 review as they were referencing the power regressions I discovered nearly two months ago within the mainline Linux kernel. As I mentioned on Sunday, the Phoronix Test Suite stack and I have now nailed this major power regression in the Linux 2.6.38 kernel that is affecting a significant number of mobile Linux users. Here is what is happening and a way that you should be able to workaround the serious regression should it affect your computer system(s)."
Here is some more Tech News from around the web:
- An In-Depth Look at Fedora 15 @ Techgage
- The TR Podcast 90: Retro gaming and future Fusion
- Win a Blackberry Curve 9300 [RED] @ t-break