The Enermax Coenus; decent price, decent features

Subject: Cases and Cooling | June 24, 2013 - 01:49 PM |
Tagged: enermax, Coenus, atx

Enermax's new case, the Coenis, stands 478 x 234 x 488mm (18.8 x 9.2 x 19.2") which should give you plenty of space for large coolers and larger GPUs.  With 10 drive slots total you can also fit quite a bit of storage into the case as well.  This case puts the PSU at the bottom of the case, with a vent hole directly beneath it which should hopefully isolate a lot of the heat produced from the rest of the case, beneficial for those thinking of using watercooling.  For $70 you can have this case, which picked up a Silver from [H]ard|OCP.

H_enermaxcoenus.jpg

"Enermax marches on in its war against "plain old" ATX computer case. Today we have a chassis that is fit for a king, Alexander the Great to be specific. This case has bottom draft cooling leading its "advanced cooling system," along with a fine feature list. Alexander was undefeated in battle, will Enermax retain that legacy?"

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Thermaltake Launches Urban S21 Mid Tower Chassis

Subject: Cases and Cooling | March 3, 2013 - 10:53 PM |
Tagged: thermaltake, mid tower, case, atx

Thermaltake has released a new mid tower chassis aimed at enthusiasts favoring minimalist designs. Constructed of SECC (Steel, Electrogalvanized, ColdRolled, Coil) steel, the Thermaltake Urban S21 supports ATX motherboards, high-end graphics cards, and both air and water cooling options. It measures 17.2” x 7.5” x 19.6”.

Thermaltake Urbarn S21 Front Panel.jpg

The new chassis is all black and features a brushed metal design on the front panel. The brushed metal front door hides the externally-accessible drives. At the top of the front panel, the case features two USB 3.0 ports and two audio jacks. A power LED along with both power and reset button adorns the top-edge of the case. The side panel has space for one 120mm fan as well as a clear window above it that is about the size of a 120mm fan. Four large case feet hold the mid tower above the floor, allowing the PSU intake and an (optional) additional 120mm fan to bring cool air into the case.

Thermaltake Urban S21 Angled.jpg

Thermaltake includes two 120mm fans, but the case itself can support a maximum of five 120mm fans. The Urban S21 case interior features tool-less drive bays for up to six hard drives and three optical drives. Further, it has cable management holes, water cooling grommets, a bottom-mounted power supply, and a CPU cutout.

Thermaltake Urban S21 Cooling.jpg

Thermaltake’s Urban S21 case looks good and has a decent feature set. The case will reportedly go on sale sometime this month, but the company has not yet announced pricing. Here’s hoping the price is right as it is looking like a nice mid-tower case so far! You can find more specifications on the Urban S21 on this product page.

Source: Thermaltake
Manufacturer: Thermaltake

Introduction and Technical Specifications

Introduction

02-VO800M1W2N.jpg

Courtesy of Thermaltake

As the newest member of Thermaltake's Armor Revo case line, the Armor Revo Gene mid-tower case features sleek looks and exudes the humble power that only the war-worn warrior's know. We decided to put the Armor Revo Gene to the test to see how well the case works under a variety of circumstances. At a base price of $129.99, the Armor Revo Gene seems to be a well priced steal for the features designed into it.

03-ArmorRevo_Pic3.jpg

Courtesy of Thermaltake

04-ArmorRevo_Pic5.jpg

Courtesy of Thermaltake

The Armor Revo Gene features a flat-black, scratch-resistant coating on all surfaces, giving it a sleek and uniformly menacing look. The case's right panel contains a window in it upper half to show off your case innards, bisected by a grilled space for up to a 200mm side fan to help cool your PCI-Express cards. A wing-shaped aluminum front bezel helps to direct air through the front of the case in an optimal manner.

Continue reading our review of the Thermaltake Armor Revo Gene Mid-Tower Case!!

CES 2013: MSI Launches A85XMA-E35 ATX Motherboard

Subject: Motherboards | January 9, 2013 - 08:21 AM |
Tagged: msi, fm2, ces 2013, CES, atx, APU, a85xma-e35

MSI has launched another micro ATX motherboard for AMD APUs using the FM2 socket called the A85XMA-E35. Measuring 24.4 x 22.8 cm, the motherboard packs a number of MSI technologies including the company’s ClickBIOS II UEFI BIOS and OC Genie II auto-overclocking software.

 

MSI A85XMA-E35 FM2 ATX Motherboard.jpg

The micro ATX board features the FM2 socket, two DDR3 DIMM slots (16GB max), six SATA 6 Gbps ports, the Realtek ALC887 audio chip, a TPM module, PCI slot, two PCI-E 2.0 x1 slots, and a single PCI-E 2.0 x16 expansion slot.

MSI A85XMA-E35.jpg

Rear IO on the A85XMA-E35 board includes one PS/2 port, six USB 2.0 ports, two USB 3.0 ports, one Gigabit Ethernet port, six analog audio jacks, and VGA, DVI, and HDMI video outputs.

In the end, the A85XMA-E35 board is very similar to the A85XMA-P33 motherboard covered earlier today. MSI has added beefier heatsinks, additional expansion slots, and HDMI output so it should carry a small premium over the other board. MSI has not released official pricing for the board yet, however.

You can find more specifications and photos of the FM2-A85XMA-E35 on company's product page.

Read more about micro ATX motherboards at PC Perspective.

Coverage of CES 2013 is brought to you by AMD!

PC Perspective's CES 2013 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Source: MSI

BitFenix Unveils Survivor White Portable Mid-Tower Case

Subject: Cases and Cooling | November 28, 2012 - 01:11 AM |
Tagged: white, portable case, case, bitfenix, atx

BitFenix recently announced a new mid-tower computer chassis aimed at gamers and enthusiasts that want a portable PC that easily hosts a full ATX motherboard. Specifically, BitFenix has taken its Survivor case and made an edition clad in white that it has dubbed the Survivor White. 

bitfenix_survivor_white_02.jpg

The case features a carrying handle that folds down into the top of the case when not in use, making it easier to carry to LAN parties. It is completely white minus a blue LED-lit BitFenix logo on the front, and features curved edges. There is space for two 200mm fans or three 120mm fans around the case. Also, the new Survivor has three 5.25” expansion bays, holes for passing water cooling tubes though the back panel, a bottom mounted power supply cutout, dust filters, and a hidden IO panel. The front IO includes the power and reset buttons, two USB 2.0 ports, two USB 3.0 ports, microphone and headphone jacks, and a single eSATA port. It also has on/off controls for the LED light for the BitFenix logo and for any BitFenix Spectre Pro LED fans (not included).

bitfenix_survivor_white_03.jpg

On the inside of the Survivor-series chassis, you will find a removable hard drive cage, CPU cutout on the motherboard tray, and cable management grommets. The inside of the case is the same white color as the outside, and the hard drive cage features tool-less mounting brackets. These are all things that are coming standard on enthusiast cases these days, but are nice to see nonetheless (especially for the price). With the hard drive cage installed, the case can hold up to seven 2.5” SSDs or six 3.5” hard drives.

bitfenix_survivor_white_04.jpg

BitFenix has stated that the white colored Survivor case will be available at the end of November for $109 USD or 99€ (including 19% VAT).

What do you think about the new Survivor SKU?

Source: BitFenix

ECS Launches A970M-A Deluxe for AMD Processors

Subject: Motherboards | October 31, 2012 - 03:59 PM |
Tagged: vishera, phenom, motherboard, ECS, atx, amd, am3, a970m-a deluxe

Elitegroup Computer Systems is on a roll this week for launching motherboards supporting AMD processors. In addition to its mini ITX offerings, the company is launching the A970M-A Deluxe in it’s full gold-clad ATX form factor glory (heh). It offers up support for AMD’s latest FX and Phenom II series processors along with SATA III 6Gbps and USB 3.0 for speedy storage. Unfortunately, there is no PCI-E 3.0. Otherwise, this is a high end motherboard and has the feature set to match.

a970m-a-deluxe_430.jpg

In typical ECS fashion, the company has outfitted the board with gold colored heatsinks, EZ BIOS, solid capacitors, “Thor Ultra Protection,” a dust shield, and support for up to 140W TDP processors, among other features. The EZ BIOS is actually a uEFI BIOS that allows you to tweak settings using a graphical interface as well as automatic overclocking functionality that can overclock the AMD processor for you (to an extent).

Internal IO and board layout

a970m-a-deluxe_580_1.jpg

The board has several gold-colored heatsinks over the VRM and southbridge hardware. Along the top of the board lies the AM3+ CPU socket and four DDR3 DIMM slots. The board supports up to 2133 MHz memory when overclocked and up to 32 GB of RAM (when using 8GB DIMMs). Expansion slots include two PCI-E 2.0 x16 slots, two PCI-E x1 slots, and two legacy PCI slots. The lower-right corner features five SATA III 6Gbps ports – two of which are positioned at right angles to the board. Expansion headers include three fan headers, one COM header, and three USB 2.0 headers (up to 6 additional ports) are also included on the board.

a970m-a-deluxe_580_io.jpg

The rear panel IO includes:

  • 1 x PS/2 combo port
  • 1 x RJ45 port (Realtek 8111E Gigabit LAN Controller)
  • 1 x eSATA 6Gbps port
  • 2 x USB 3.0 ports
  • 8 x USB 2.0 ports
  • 5 x Analog audio jacks (4 line out, 1 line in. Realtek ALC892 codec)
  • 1 x S/PDIF optical audio output

While we do not yet have US pricing, when converted from the stated RS 9,000 (according to Think Digit)to USD, the board is just under $170. No word yet on stateside availability. You can find more information on the ECS specifcations page.

Source: ECS

BioStar's Hi-Fi Z77X is aimed at HTPC users

Subject: Motherboards | October 15, 2012 - 03:44 PM |
Tagged: Z77, biostar, Hi-Fi Z77X, lga 1155, htpc, atx

While you might not think of a full ATX board being the basis for an HTPC system, BIOSTAR is hoping that you will consider their Hi-Fi Z77X when you next spec out a possible system.  The extra size allows you to have more add-in card options with three 16x PCIe slots (8x, 8x, 4x) and two PCIe 1x slots, which simply would not fit on a mATX board.  The back panel offers VGA, HDMI and DVI out, so even without a discrete card you have quite a few output options as long as Intel onboard graphics are enough to meet your needs.  They also include a Realtec CODEC which is better than [H]ard|OCP expected on a sub-$150 motherboard and were also impressed by the overclocking ability on this value board, not as good as an enthusiast board but still pleasantly capable.

biostarz77htpc.jpg

"BIOSTAR generally has a reputation for making low end or budget oriented motherboards. Fortunately that isn't all BIOSTAR designs and builds. The Hi-Fi Z77X is an unusual motherboard in that it seems to be targeted towards HTPC and media type duties while still addressing enthusiast hardware and overclocking concerns."

Here are some more Motherboard articles from around the web:

Motherboards

Source: [H]ard|OCP
Author:
Subject: Motherboards
Manufacturer: ASUS

Introduction and Technical Specifications

Introduction

image1.jpg

Courtesy of ASUS

It's been a couple months since we've had a chance to evaluate a Z77-based motherboard, so we are taking this opportunity to throw ASUS's P8Z77-V Deluxe on our test bench to put it through our comprehensive real-world and synthetic benchmarks. This $279 board has been available for several months and supports the LGA 1155 platform that includes Sandy Bridge and Ivy Bridge processors.

 

image2.jpg

Courtesy of ASUS

There are many features to drool over about the ASUS P8Z77-V Deluxe, but my favorite ones include the board's unique power management features, Wi-Fi functionality with remote access, and customized UEFI BIOS.  This board also includes other enhancements that focus on support for faster USB 3.0 and PCIe 3.0 integration as well as extra SATA 6GB/s ports that provide double the bandwidth of current bus systems.

 

Continue reading more about our review of the ASUS P8Z77-V Deluxe!

Murderbox Modding Limited Run of $1200 MKII PC Cases

Subject: Cases and Cooling | September 21, 2012 - 08:37 AM |
Tagged: murderbox mkii, murderbox, modding, custom case, atx

The Canadian moddding duo behind Hardwood Studios Inc has unveiled its latest custom PC case called the Murderbox MKII. The Muderbox MKII represents a completly overhauled design that has its roots in the Silverstone TJ07 and is nearly ready for release after two years of development. The custom PC chassis gets you an all-alluminum chassis that offers better cable management, a water cooling friendly design, custom drive bays, and a custom black anodized textured surface. What will this cost you? A cool $1200 for the base model, and the price goes up from there if you add extras. The Murderbox MKII is a limited edition custom case with only 499 cases produced in total.

Murderbox MkII Case.jpg

The Murderbox MKII features a unibody aluminum chassis that has acylic side panel windows that are mounted to be flush with case metal on the outside. The front includes a red backlit logo, power and reset buttons, and a single externally accessible 5.25" drive bay. The top of the case features an etched fan grill, or a set of two fans should you upgrade to the fan accessory for $150.

Fan_Attachment_$150.jpg

The dual fan accessory.

The back of the case is part of the removable motherboard tray and features plenty of vents and PCI slot covers. There is also space for a bottom mounted power supply. Internally, the Murderbox MKII features a spot to hold a watercooling resorvoir on the motherboard tray (that slides into the case on nylon-coated rails), space for a 480mm watercooling radiator in the bottom, and drive bays that are pre-wired. You put the storage drives onto sleds and slot them into the bays where they connect to already-mounted/wired SATA power and data connectors. The custom case can hold three 3.5" hard drives, three 2.5" SSDs, and a single 5.25" drive. On the top of the case is a slot loading DVD drive as well.

Murderbox MkII Case_4.jpg

Overall it is a really slick PC case that appears to have received quite a bit of TLC to get the perfect enthusiast case. However, with a limited run of 499 cases and a price tag that is more than most entire computer builds [My first DIY PC build actually cost just under 1200 in 2007, for example.. and I think the case was under $100 heh], the Murderbox MKII is going to be more of a spectacle than a stomach-able purchase (just imagine trying to get the 'significant other approval factor' passed on this thing!).

Murderbox MkII Case_3.jpg

On the other hand, this is a piece of finely crafted hardware that is sure to turn heads and is nice to gaze upon, so if you want to check out more pictures you can find the gallery on the Murderbox website!

See what parts we recommend for your next build on the PC Perspective Hardware Leaderboard.

Source: Murderbox
Author:
Manufacturer: ASUS

Introduction and Features

Introduction

icon1.jpg

Courtesy of ASUS

ASUS continues to optimize their hardware for the overclocking and PC gaming crowds, but they are also catering to a niche audience looking for ultra stable and durable PC components. ASUS's Sabertooth X79 motherboard is their one of their latest products to bear the TUF series label and sport customized hardware and thermal components as well as a desert camo color scheme to complete the military look. This $329 motherboard comes with a five-year warranty, digital power management system, rugged chokes, solid capacitors, and MOSFETs that have been certified through third party, military-grade testing.

 

icon3.jpg

Courtesy of ASUS

The Sabertooth X79 also comes with a host of other features to improve SSD caching and give users quad GPU support for CrossfireX and SLI graphics card configurations. This board also includes a unique UEFI BIOS and natively supports 2TB hard drives with 64-bit operating systems. The USB BIOS "Flashback" feature also helps new users update their motherboard BIOS without entering the BIOS. ASUS states that users can use any USB storage device with the latest BIOS, push the BIOS button located on the back I/O panel for three seconds, and the board will automatically update the BIOS using standby power. Very cool!

 

icon4.jpg

Courtesy of ASUS

The back I/O panel on the Sabertooth X79 is no slouch either as it gives users a healthy amount of USB 2.0, USB 3.0, and eSATA 6GB/s ports for greater performance and expandability options. They also added a small fan over the back I/O panel as part of their "TUF Thermal Armor" feature that will help cool and exhaust heat from ther motherboard out the back of the chassis. Let's move on to the rest of the Saberbooth X79's features where we will get our first out-of-the-box look at this motherboard.

Continue reading our review of the ASUS Sabertooth X79 LGA2011 Motherboard!!