Corsair's Neutron drives get even more dense

Subject: Storage | May 3, 2013 - 07:32 PM |
Tagged: LAMD, corsair, neutron, ssd, asynchronous NAND, 22nm

Still featuring the Link_A_Media Devices LM87800 controller but with all new 22nm SK Hynix Synchronous NAND the refreshed Corsair Neutron SSD series just arrived on [H]ard|OCP's test bench.  The refresh brings both good and bad attributes, while the 22nm NAND proves a little slower than the original 25nm it also brings a much lower price.  That lower price paired with a 5 year warranty should make this drive attractive to users that are holding off on picking up an SSD because of fears that the drive will stop functioning in a few years, or who have a hard time spending well over $1/GB for storage.

H_neutron.jpg

"Corsair keeps pace with continuing innovation in the NAND market by switching from 25nm IMFT NAND to the rarely seen 22nm SK Hynix NAND. This NAND provides a lower price point and extra capacity. Today we take a look to see if the Neutron Series performance remains and how this new SSD build stacks up to the competition."

Here are some more Storage reviews from around the web:

Storage

Source: [H]ard|OCP

Corsair Unveils Two New 90GB SATA 6Gb/s SSDs, A World's First

Subject: Storage | August 19, 2011 - 02:35 AM |
Tagged: ssd, ONFI, Force Series 3, corsair, asynchronous NAND, 90GB

Corsair recently added two new solid state drives to its SSD lineup. The new drives weight in at 90 GB, and make an interesting choice for those that need a bit more space than Corsair’s 60 GB drives provide but not enough to justify a higher priced 120 GB drive. Of the two drives, one will be labeled a Force Series 3 drive, and the other will be a Force Series GT SSD. Tweaktown quoted Corsair in stating:

“We're happy to add the world's first 90GB SSD to our product lineup. With 50% more storage capacity than our 60GB models and at pricing significantly lower than our 120GB models, they help make the Force Series 3 and Force Series GT among the most robust and flexible SSD lines on the market.”

The new 2.5” drives are powered by Sandforce 2281 controllers, and the SATA 3 (6Gb/s) interface. Using the benchmarking utility IOMeter 08, Corsair measured the IOPS (input/output operations per second) of the two drives to be 85,000. The Force Series 3 90GB SSD uses asynchronous NAND, and is capable of sequential read and write speeds of 550MB/s and 500MB/s respectively. On the other hand, the Force Series GT 90GB SSD uses ONFI synchronous flash, and features a slight performance edge with sequential reads of 555MB/s and sequential writes of 505MB/s.

ssd_f3_angle_90gb.png

The 90GB SSDs supports SMART monitoring, the TRIM command, and have a MTBF (mean time before failure) of 2 million hours. Further, the drives carry a three year warranty. The drives are available now from authorized retailers with an MSRP of $159 for the Force Series 3 drive and $199 for the Force Series GT SSD.

Source: Tweaktown