Antec Announces GX1200 Mid Tower Case For Gamers

Subject: Cases and Cooling | September 9, 2016 - 12:26 AM |
Tagged: mid tower, E-ATX Case, antec

Antec revealed a new mid tower case aimed at gaming PCs for the European market. The GX1200 mid tower measures 510mm x 200mm x 510mm and supports motherboards up to E-ATX in size. The GX1200 is rather stylized with angled front and top panels along with a large windowed side panel and hexagonal mesh front panel grill. I/O sits on the top edge and includes two audio jacks, a power button, two USB 3.0 ports, and a button to control the LEDs (on/off and mode selection e.g. pulsing, color changing, blinking, and fading).

Antec GX1200.jpg

Antec includes two 120mm RGB LED fans on the front intake and the case also sports an LED under-glow lighting. The case mounted LEDs and up to six fans are controlled using the “Antec Magic Box” which is the company’s fan controller. In addition to the included front intake fans, users can install a 140mm fans in the front and back and two 140mm fans on top. On the water cooling front, it is possible to install a 120mm radiator in back, 280mm radiator up top and a 360mm radiator in the front. Not bad for a mid-tower though you do give up optical drives (there are no 5.25” bays on this case).

Internally, the Antec GX1200 features a bottom mounted PSU (with removable dust filter albeit removable from the rear much to Ryan’s dismay) in its own chamber to help hide cables and isolate heat, two 3.5” bays, three 2.5” SSD mounts, seven PCI slots, and support for graphics cards up to 410mm (~16-inches) in length. There are also various locations to tie up cable bundles behind the motherboard tray as well as holes to pass wires through (though there are no rubber grommets, they are just cut outs).

I am not a huge fan of the aesthetics (I have seen worse though and I may just be getting old hah!), but it does seem like a functional case. It will be available in Europe for 84€ (approximately $95 USD) soon. There is no word on US availability yet.

Source: Antec

Upcoming Mini ITX Antec Cube – Designed by Razer Launched At PAX West

Subject: Cases and Cooling | September 6, 2016 - 09:28 PM |
Tagged: antec, mini ITX, SFF, water cooling, razer, PAX

At PAX West, Antec, in a partnership with Razer, showed off a new small form factor case for Mini ITX systems called the Antec Cube – Designed By Razer. The new case is an angular forward leaning design with an all-black finish complemented by green LEDs and darkened acrylic windows on the sides and top. It sports a green power button, green triple snake Razer logo, front IO on the top edge of the front panel with green USB 3.0 ports, and green LED under-glow strips on the left and right bottom sides. Needless to say, this is the case for fans of the color green (heh).

Antec Cube Designed By Razer.jpg

Internally, the Antec Cube – Designed By Razer (Why must this have such a long name?) can accommodate Mini ITX motherboards, ATX power supplies, three expansion slots, one 3.5” hard drive, and up to four 2.5” drives. It has decent component support with room for GPUs up to 350mm (~13.77”) with front intake fans removed and CPU coolers up to  190mm (~7.48”) tall. The motherboard is installed upside down so GPUs will be closest to the top of the case. The power supply is hidden in the bottom of the case by a shroud that allows you to hide your rats nest of cables (heh) as well.

As for cooling, the small form factor case has support for up to a 140mm rear exhaust fan and two 120mm intake fans in the front (or a 240mm water cooling radiator).

I think that this case would be a good fit for a custom water cooling loop as an air cooled GPU may have a hard time being up top with little ventilation, especially if it is not of the blower style design and is dumping heat out into the top of the case. Also, it would look cooler (heh). Actually, Antec showed off a water cooled system using the case at PAX West which you can see in this video thanks to Steve Burke over at Gamer’s Nexus who was at the show. It does have some nice features including a removable PSU dust filter and a new click system for the side panels that reportedly make them easy to remove and install.

Antec Razer Cube.png

The case will be sold individually as well as in pre-built systems in the US while in China it will be sold exclusively with pre-built PCs from OEMs. Production is slated to begin next month with availability by the end of the year. There is no word yet on pricing, unfortunately.

What do you think about the new SFF case? And those green LEDs?

Source: Antec

Antec Makes Large Coolers. No-one Tell Morry.

Subject: Cases and Cooling | June 4, 2016 - 11:32 PM |
Tagged: fanless, cpu cooler, antec

The folks down at FanlessTech found a giant heatsink that Antec showed off at Computex. It consists of three large stacks of aluminum, weighing about 3lbs, with potentially four fans moving air slowly across it. The original post doesn't mention whether it could be used in a fanless mode, but come on. It should be able to cool something without a fan directly attached to it.

antec-2016-largecooler-gdm-or-jp.jpg

Image Credit: GDM.or.jp

They don't seem to have price, availability, or even a model number yet, so details are scarce. It will have at least three colors, black, gold, and red, though, so you have a choice about how it will look in your case. Well, at least mostly in your case.

Update (June 5th @ 2:20pm): Turns out that I forgot to add the dimensions and specifications of this cooler. Its total size is 165mm x 142mm x 159mm. Its intended fans spin at 800-1800 RPM. At 800 RPM, they push 12.36 cubic feet per minute of air at 17.5 dBA. At 1800 RPM, they push 65.23 cubic feet per minute of air 25.9 dBA.

Antec Announces P9 Window Full-Tower Enclosure

Subject: Cases and Cooling | May 2, 2016 - 09:00 AM |
Tagged: side window, P9 Window, mid-tower, Full-Tower, fan controller, enclosure, case, atx case, antec

Antec has listed a new P9 Window tower enclosure on their site ahead of Computex, and while it's listed as "not available" at the moment, that should change by the end of the month.

p9-window-1.jpg

So what is this P9 Window? It's a straightforward case with a big side window, excellent storage and cooling support, and dual onboard fan controllers.

"Don’t let the sleek, understated exterior fool you. The P9 Window is loaded with builder-focused features that deliver performance, Quiet Computing, and future-proof expandability right out of the box. The interior volume, the variety of cooling options, and the modular HDD cages are just a few of the features that make the P9 Window stand out in the Performance One series."

p9-window-2.jpg

Specifications:

  • Motherboard Support: ATX, micro ATX, mini ITX
  • Expansion Slots: 8
  • 13 Total Drive Bays:
    • 3 x Tool-less 5.25” ODD Bays
    • 8 x Tool-less 3.5” HDD trays (each compatible with 2.5” SSD)
    • 1 x 3.5” HDD (inside the 5.25” drive cage)
    • 2 x Tool-less 2.5” Dedicated SSD Bays
  • Cooling System:
    • 2 x Front 120mm (included) fan
    • 1 x Rear 120mm (included) fan
    • 3 x Top 120mm or 2 x 140mm fan mounts (optional)
    • 1 x Bottom 120mm (optional)
    • 2 x 120mm HDD cage fan mounts (Optional)
  • Water cooling support:
    • Front: Supports 240mm radiator
    • Top: Supports240/280/360 mm radiator
    • Pump / Reservoir mounting brackets included
    • Removable / Relocation of HDD cages for water cooling pump
  • I/O Ports:
    • 2 x USB 3.0
    • 2 x USB 2.0
    • 2 x Fan controls
    • Audio In/Out
  • Washable air filters (front intake and PSU)
  • Supports up to 430 mm VGA cards
  • Bottom mounted ATX PSU (not included)
  • Dimensions: 22.44” (W) x 23.50 (H) x 11.26” (D)
  • Weight: 20 lbs

p9-window-3.jpg

Pricing shown in Antec's listing is a reasonable $109 for a full-tower design like this, and we'll doubtless get a chance to see how its performing soon enough as reviews start coming out.

Source: ComputerBase

Podcast #378 - Updates from the Radeon Technology Group, a new case from Antec, ASUS Maximus VIII Gene and more!

Subject: Editorial | December 10, 2015 - 01:21 AM |
Tagged: podcast, video, freesync, hdr, displayport 1.3, antec, P380, Maximus VIII Gene, killer networks, corsair, h5 sf, carbide 600

PC Perspective Podcast #378 - 12/10/2015

Join us this week as we discuss updates from the Radeon Technology Group, a new case from Antec, ASUS Maximus VIII Gene and more!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Josh Walrath, Jeremy Hellstrom, Allyn Malventano, and Sebastian Peak

Subscribe to the PC Perspective YouTube Channel for more videos, reviews and podcasts!!

Manufacturer: Antec

Introduction and First Impressions

Antec’s P-series enclosures have been around for quite a while, and have been known as quiet, stylish cases for a premium build. It had been quite a while since the last entry in the series as the previous model, the P280, which received our Gold Award when Ryan reviewed it way back in 2011, and this current version hit the market in January of 2015. Needless to say, Antec’s Performance enclosures have some staying power. So how does this latest entry stack up?

p380_main.jpg

The new P380 carries an MSRP of $229.95, placing it in the higher end of the premium enclosure market. While it can certainly be found for less (around $140 currently on Amazon) the bar is still set pretty high when the price exceeds $100, though the P380 is in a different world than Antec's Signature S10 enclosure, which launched at a mind-boggling $499 (it has since come down considerably). With the highly competitive enclosure market offering a number of spacious and quiet options, the P380 will need to differentiate to succeed.

“When only the best can satisfy your needs, the P380 is the answer. Known for its minimalistic design, the Performance series focuses on delivering the perfect balance between performance and Quiet-Computing. Whether you’re designing your ultimate dream PC or, just creating a monster file server, the P380 should be the choice, without hesitation.”

Antec is obviously confident about this newest P-series enclosure and I’ll be putting it to the test using a new, more stringent enclosure review process. We'll take a look at the case inside and out, and then see how it performs with a gaming build using both a closed-loop liquid CPU cooler, and a conventional air CPU cooler to see how the case airflow affects warm components.

DSC_0045.jpg

Continue reading our review of the Antec P380 Full-Tower enclosure!

Manufacturer: Antec

Introduction and First Impressions

The Antec Signature Series S10 is the company's new flagship enclosure, and it looks every bit the part. A massive full-tower design with seemingly no expense spared in its design and construction, the S10 boasts many interesting design details. So is it worth the staggering $499 price tag? (Update: A day after our review was published Newegg cut the $499 MSRP by $150, taking the S10 down to $299 after a $50 rebate.) 

DSC_0749.jpg

The Signature S10 is an interesting product to be sure. Antec, long renowned as a maker of premium cases has in recent years lost some of the cachet that they once had with enthusiasts. This is no reflection on Antec and more a result of the industy's flood of enclosures into the market, with virtually every brand filling all price segments. Corsair, SilverStone, Fractal Design, Lian Li, Cooler Master, In Win, NZXT, BitFenix, Phanteks, and the list goes on and on...

So where does the new S10 enclosure fit into this market? Antec made the daring move of placing the Signature enclosure directly at the top with a shocking $499 retail price - which subsequently dropped to $449 and then again to $349 before a $50 rebate. I can think of no other recent enclosure this expensive at launch other than the In Win S-Frame, and it positioned the S10 as an unattainable object for most builders. So was Antec successful in creating an aspirational product - even before the recent price cuts?

DSC_0773.jpg

Is that... Batman??

Continue reading our review of the Antec Signature S10 enclosure!!

The 750W Antec EDGE; pretty and powerful

Subject: Cases and Cooling | September 9, 2014 - 04:09 PM |
Tagged: modular psu, Antec EDGE, antec, 80Plus Gold, 750w

The Antec EDGE 750W PSU can provide up to 62A on its four 12V rails and with six 6+2 PCIe power connectors it is perfect for a system with multiple mid to high end GPUs.  When [H]ard|OCP cracked it open they saw a high quality Seasonic design similar to the XFX XTR 750W and a decent quality 135mm fan.  Once hooked up in the torture chamber the PSU passed every test they threw at it but in the end this PSU was awarded with a Silver Award as it did not vast outclass other 750W PSUs available for significantly less money.  It is a very good choice and if you see it on sale you should consider it a serious contender for your hard earned cash.

1409195460EH8DFZVILL_2_10_l.jpg

"Antec is easily a go-to brand for many computer hardware enthusiasts and Antec has not been resting on its reputation. Today is the debut of the Antec EDGE 750W. This PSU boasts full modularity, up to 92% efficiency, high quality Japanese capacitors, "Flat Stealth Wires," all riding on two "High Current Rails.""

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Antec's TruePower 750W offers good performance at a good price

Subject: Cases and Cooling | July 8, 2014 - 05:47 PM |
Tagged: PSU, antec, 750w, 80 Plus Gold, TruePower Classic

[H]ard|OCP reviewed the highest powered model of the new TruePower Classic lineup, the 750W non-modular 80 Plus Gold rated PSU which has a lot of advertising hype to live up to.  Inside it is a highly modified Seasonic G-Series with quality capacitors, though the fan is only of middling quality.  This PSU did pass every test that was thrown at it bit did not quite provide the same high performance as other PSUs [H] tested that used the same design.  On the other hand at $103 it does not cost as much either making it a good example of compromise between extreme performance and extreme cost.

1404094089NY1N84CSo9_2_9_l.jpg

"Antec comes to us today with a mid-level 750 watt enthusiast computer power supply that touts Gold efficiency. This PSU is somewhat light on marketing and heavy on features such as Japanese capacitors, "unprecedented tight voltage regulation," and low ripple and noise to "maximize your system's performance."

Here are some more Cases & Cooling reviews from around the web:

CASES & COOLING

Source: [H]ard|OCP

Antec Launches HCP-1300 Platinum Power Supply For Extreme Crypto Mining Rigs

Subject: General Tech | February 28, 2014 - 12:07 AM |
Tagged: power supply, HCP-1300, antec, 80 Plus Platinum

Antec has released a new high capacity HCP-1300 Platinum power supply fit for the highest-end workstations and cryptocurrency mining rigs. The 80 PLUS Platinum rated PSU is up to 94% efficient meaning less wasted electricity and more profit for miners running power hungry GPU farms. The HCP-1300 Platinum, as the name implies can deliver up to 1300W to the system, including 10 PCI-E power connectors.

Antec HCP Platinum 1300W Power Supply.jpg

The new PSU uses a fully modular design with a look towards the future. Antec is using 16-pin cable connectors for future modular cables as well as a 20+8 pin motherboard connector to accommodate future ATX motherboards that might require an additional four power pins over today's 20+4 pin boards. A 135mm fan keeps the internal components cool at high loads. Other enthusiast-friendly features include CircuitShield technology and an OC Link connector. The OC Link allows adventurous enthusiasts and miners to connect two HCP-1300 Platinum power supplies together and have them work in tandem to power a single ultra high end system (hopefully you miners attempting this are plugging the PSUs into dedicated AC circuits!).

This enthusiast PSU comes at a premium, however. In fact, the Antec HCP-1300 Platinum will set you back $312 for a single unit. On the bright side, it does come with a generous seven year warranty.

Will this beastly power supply be at the heart of your next Dream System?

Source: eTeknix