VESA Releases DisplayPort 1.3 Standard

Subject: General Tech, Displays | September 15, 2014 - 01:05 PM |
Tagged: displayport 1.3, freesync, 5k, vesa, dockport

It is official, DisplayPort 1.3 has finished VESA approval and should be hitting the streets in the near future.  Freesync support came with 1.2a which is why it was not mentioned, however DockPort has been enhanced with the higher 8.1 Gbps link rate for each of the four lanes present which means you can support a 4k monitor using two of those lanes, leaving the other two available for USB, audio or even power.

This also means that 4k and even 5k monitors can function over a single DisplayPort 1.3 cable without any compression and with the use of VESA's Coordinated Video Timing you can have a pair of 4k monitors function in multi-monitor mode ... assuming you have the graphical horsepower to run 7680 x 2160.  It is rather impressive to see this jump to 32.4 Gbps combined link rate that can deliver 25.92 Gbps of uncompressed video data.

dp2.jpg

Newark, CA (15 September 2014) The Video Electronics Standards Association (VESA) announced the release of the DisplayPort 1.3 audio / video (A/V) standard. An update to the widely used DisplayPort 1.2a standard, this latest version increases the maximum link bandwidth to 32.4 Gbps, with each of four lanes running at a link rate of 8.1 Gbps/lane a 50% increase from the previous version of the DisplayPort standard. Allowing for transport overhead, DisplayPort's 32.4 Gbps combined link rate delivers 25.92 Gbps of uncompressed video data.

The increased bandwidth enables higher resolution monitors, including recently announced 5K monitors (with pixel resolutions of 5120 x 2880) using a single DisplayPort cable without the use of compression. It will also enable higher resolutions when driving multiple monitors through a single connection using DisplayPort's Multi-Stream feature, such as the use of two 4K UHD monitors, each with a pixel resolution of 3840 x 2160, when using VESA Coordinated Video Timing.

DisplayPort 1.3 continues to support video conversion to VGA, DVI and HDMI. DisplayPort 1.3 adds support for HDCP 2.2 and HDMI 2.0 with CEC (Consumer Electronics Control), which enhances DisplayPort's utility for television applications, including 4K video with copy protection. The new standard adds support for the 4:2:0 pixel structure, a video format commonly used on consumer digital television interfaces, which enables support for future 8K x 4K displays.

dp1.jpg

DisplayPort 1.3 also enhances DisplayPort's value for multi-function interfaces that combine data transport, A/V transport and other capabilities on a single cable. It further refines protocols that enable DisplayPort to share a single cable with other data types. With its higher 8.1 Gbps per-lane link rate, DisplayPort 1.3 can support a single UHD monitor with 60Hz refresh and 24-bit color over two lanes, while assigning the remaining two lanes to increase capacity for alternate data types, such as SuperSpeed USB data, as allowed in DockPort. DisplayPort is the A/V transport standard used by DockPort, Thunderbolt and other wired and wireless multi-function interface standards.

While becoming a mainstream video standard, DisplayPort continues to be at the cutting edge of A/V transport, said VESA Board of Directors Chair Alan Kobayashi, Fellow & Executive R&D Management for DisplayPort Group at MegaChips Technology America. These new enhancements to DisplayPort will facilitate both higher resolution displays, as well as easier integration of DisplayPort into multi-protocol data transports, which will satisfy consumer's desire for simplicity and ease-of-use.

The DisplayPort standard is offered to VESA members without any license fee. For more information about DisplayPort, please visit http://www.displayport.org or connect with us on YouTube.

Source: VESA

Podcast #317 - ASUS X99 Deluxe Review, Core M Performance, 18 Core Xeons and much more news from IDF!

Subject: General Tech | September 11, 2014 - 11:30 AM |
Tagged: podcast, video, asus, X99, X99 Deluxe, Intel, core m, xeon e5-2600 v3, idf, idf 2014, fortville, 40GigE, dell, 5k, nvidia, GM204, maxwell

PC Perspective Podcast #317 - 09/11/2014

Join us this week as we discuss our ASUS X99 Deluxe Review, Core M Performance, 18 Core Xeons and much more news from IDF!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Josh Walrath, Allyn Malventano, and Morry Tietelman

Program length: 1:33:48

  1. Week in Review:
  2. IDF News:
  3. News items of interest:
  4. Hardware/Software Picks of the Week:
    1. Allyn: Read our IDF news!
  5. Closing/outro

Subscribe to the PC Perspective YouTube Channel for more videos, reviews and podcasts!!

 

Dell resolves to have the most pixels ever; meet 5120 x 2880 aka 5K

Subject: Displays | September 4, 2014 - 04:49 PM |
Tagged: dell, 5120 x 2880, 5k, UltraSharp 27 Ultra HD 5K

That's right, Dell is releasing the Dell UltraSharp 27 Ultra HD 5K Monitor with a resolution of 5120 x 2880 for a mere $2500 just in time for Christmas.  That is just under 6.5 million more pixels than 4k which is an impressive jump and should look very interesting on a 27" display!

MaxPNG.png

While we may not have TV content to justify this resolution gamers with extreme GPUs should be able to take advantage of it as soon as it is released. You will probably be able to turn your anti-aliasing settings down with pixels that small.  It will also have 16W integrated Harmon Kardon speakers and quite likely a few USB ports.  Surround setups are going to need every PCIe lane you can toss at it though, good thing those 295X2's are on sale right now!  They've also added some information about their 4K displays here.

MaxPNG2.png

Source: Dell