Kingston Digital Releases Larger Capacity mSATA Drives

Subject: Storage | April 22, 2014 - 02:24 PM |
Tagged: kingston, msata, ssdnow, SandForce SF-2241, SandForce SF-2281, ssd

Fountain Valley, CA – April 21, 2014 – Kingston Digital, Inc., the Flash memory affiliate of Kingston Technology Company, Inc., the independent world leader in memory products, today announced the addition of 240GB and 480GB capacities to the existing SSDNow mS200 mSATA SSD line. Kingston’s SSDNow mS200 mSATA solid-state drive allows system builders and enthusiasts a cost-effective performance boost with quicker boot time and application loads while requiring less power than HDDs.

The mS200’s small-form factor is perfect for notebook, tablet and Ultrabook PCs, as well as a variety of embedded systems. It can also be used as a caching device with motherboards that support Intel Smart Response Technology (SRT) to improve system performance. mS200 has read speeds up to 550MB/s and write speeds up to 520MB/s.

The 30GB, 60GB, 120GB, 240GB and 480GB mS200 mSATA SSDs have a caseless, PCB-only design with no moving parts and are backed by a two- or three-year warranty, free technical support and legendary Kingston reliability. For more information visit www.kingston.com.

unnamed.jpg

Features & Specifications:

  • LSI SandForce 2241 (30GB, 60GB, 120GB) and 2281 (240GB, 480GB) controller with SATA Rev. 3.0 (6Gb/s) interface: twice as fast as the previous generation, yet more cost-efficient 
  • mSATA interface: fully compliant with industry standard, easy to fit, guaranteed to work 
  • NAND Flash memory based: shock-resistant with low power consumption
  • Supports Intel’s SRT: combines capacity advantage of HDD with performance improvements of SSD in dual-storage configuration
  • Supports S.M.A.R.T.: monitors the status of your drive
  • Supports TRIM: maintains maximum performance on compatible operating systems
  • Interface: SATA Rev. 3.0 (6Gb/s), SATA Rev. 2.0 (3Gb/s), SATA Rev. 1.0 (1.5Gb/s) ·
  • Capacities1: 30GB, 60GB, 120GB, 240GB, 480GB
  • Automatic Encryption (AES 128-bit):Password at the drive level ensures secure data protection
  • Sequential Read/Write2:
    • 30GB – 550 MB/s / 510MB/s
    • 60GB – 550 MB/s / 520MB/s
    • 120GB – 550MB/s / 520MB/s
    • 240GB – 540MB/s / 530MB/s
    • 480GB – 530MB/s / 340MB/s ·
  • Maximum 4k Read/Write2:
    • 30GB – up to 86,000/ up to 77,000 IOPS
    • 60GB – up to 86,000/ up to 79,000 IOPS
    • 120GB – up to 86,000/ up to 48,000 IOPS
    • 240GB – up to 72,000/up to 40,000 IOPS
    • 480GB – up to 72,000/up to 18,000 IOPS ·
  • Random 4k Read/Write2:
    • 30GB – up to 7,500/71,000 IOPS
    • 60GB – up to 14,000/77,000 IOPS
    • 120GB – up to 17,000/45,000 IOPS
    • 240GB – up to 21,000/41,000 IOPS
    • 480GB – up to 21,000/13,000 IOPS
  • PCMARK® Vantage HDD Suite Score: 60,000
  • Power Consumption: 0.4W Idle / 1.2 (TYP) Read / 1.8W (TYP) Write
  • Storage temperature: -40°C ~ 85°C
  • Operating temperature: 0°C ~ 70°C
  • Dimensions: 50.88mm x 30mm 
  • Weight: 6.86g
  • TRIM Supported
  • Vibration operating: 2.17G
  • Vibration non-operating: 20G
  • MTTF: 1,000,000 Hrs
  • Warranty/support:
    • 30GB – two-year warranty with free technical support
    • 60GB, 120GB, 240GB, 480GB – three-year warranty with free technical support 
  • Total Bytes Written (TBW)3:
    • 30GB: 121TB 3 DWPD4
    • 60GB: 218TB 3 DWPD4
    • 120GB: 337TBW 2 DWPD4
    • 240GB: 585TBW 2 DWPD4
    • 480GB: 1562TBW 2 DWPD4

1 Some of the listed capacity on a Flash storage device is used for formatting and other functions and thus is not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston's Flash Memory Guide.
2 Based on “out-of-box performance.” Speed may vary due to host hardware, software and usage.
3 Total Bytes Written (TBW) is derived from the JEDEC Workload (JESD219A).
4 Drive Writes Per Day (DWPD)

Source: Kingston
Subject: Memory
Manufacturer: Kingston

Ultra-Speed RAM, APU-Style

In our review of the Kingston HyperX Predator 2666MHz kit, we discovered what those knowledgeable about Intel memory scaling already knew: for most applications, and specifically games, there is no significant advantage to increases in memory speed past the current 1600MHz DDR3 standard.  But this was only half of the story. What about memory scaling with an AMD processor, and specifically an APU? To find out, we put AMD’s top APU, the A10-7850K, to the test!

apu_components_1.jpg

Ready for some APU memory testing!

The APU

AMD has created a compelling option with their APU lineup, and the inclusion of powerful integrated graphics allows for interesting build options with lower power and space requirements, and even make building tiny mini-ITX systems for gaming realistic. It’s this graphical prowess compared to any other onboard solution that creates an interesting value proposition for any gamer looking at a new low-cost build. The newest Kaveri APU’s are getting a lot of attention and they beg the question, is a discrete graphics card really needed for gaming at reasonable settings?

Continue reading our article on using high speed DDR3 memory with AMD APUs!!

Shave another couple of watts off your Kabini system

Subject: Memory | April 9, 2014 - 06:54 PM |
Tagged: kingston, kingston hyper x, Genesis LoVo, 16GB, ddr3-1600

If you were impressed by the low wattage required to run the AMD AM1 Athlon 5350 and are thinking of building a low power system along the lines of the one Josh used in his review Kingston has a product to help you lower that total system voltage a little more.  HyperX Genesis LoVo uses only a mere 1.35V to power the 16GB DDR3-1600 CL9 kit and their low profile helps if you are building a small sized system.  Performance at stock speeds is quite decent, with the possibility of overclocking to add more speed if you desire but these DIMMs are more about power savings than raw power.  Check out the full review at Funky Kit.

Kingston_LoVo_pht2.jpg

"Even though higher clocked RAM is great for overclocking and gaming for most computer users, memory at lower clocks is good enough for the general tasks they perform daily. For those users, memory speed is usually less important than capacity so today we wish to present something more regular in the memory's world what is Kingston HyperX Genesis LoVo 16GB DDR3-1600 CL9. As probably some readers already noticed, we can't really call it regular memory as Kingston specified it to run at low voltage of 1.35V ... and it's green like most eco-friendly products."

Here are some more Memory articles from around the web:

Memory

Source: Funky Kit
Subject: Memory
Manufacturer: Kingston

So Many MHz, So Little Time...

If you've looked at memory for your system lately you've likely noticed a couple of things. First, memory prices have held steady for the past few months, but are still nearly double what they were a little over a year ago. Second, now that DDR3 has been a mature standard for years, there is a vast selection of RAM from many vendors, all with nearly identical specs. The standard has settled at 1600MHz for DDR3, and most desktop memory is programmed for this speed. Granted, many modules run at overclocked speeds, and there are some out there with pretty outlandish numbers, too - and it’s one of those kits that we take a look at today.

HyperX_0.jpg

Hardly subtle, the Kingston HyperX 'Predator' dual channel kit for review today is clocked at a ridiculous 1066MHz OVER the 1600MHz standard. That's right, this is 2666MHz memory! It seems like such a big jump would have to provide increased system performance across the board, and that's exactly what we're going to find out.

We all want to get the most out of any component, and finding the best option at a given price is part of planning any new build or upgrade. While every core part is sold at a particular speed, and most can be overclocked, there are still some qualifying factors that make selecting the fastest part for your budget a little more complicated. Speed isn't based on MHz alone – as with processors, where it often comes down to number of cores, how many instructions per clock cycle a given CPU can churn out, etc.

Continue reading our review of the Kingston HyperX Predator 2666 MHz DDR3 memory kit!!

CES 2014 Podcast Day 4 - EVGA, Origin, Native PCI-E SSDs and more!

Subject: General Tech | January 9, 2014 - 02:28 AM |
Tagged: video, sandforce, podcast, plextor, pci-e ssd, origin, Marvell, kingston, evga, adata

CES 2014 Podcast Day 4 - 01/08/14

It's time for podcast fun at CES!  Join us as we talk about the fourth day of the show including exciting announcements from EVGA, Origin, PCI-E SSDs from Kingston, Plextor, and ADATA and more!

You can subscribe to us through iTunes and you can still access it directly through the RSS page HERE.

The URL for the podcast is: http://pcper.com/podcast - Share with your friends!

  • iTunes - Subscribe to the podcast directly through the iTunes Store
  • RSS - Subscribe through your regular RSS reader
  • MP3 - Direct download link to the MP3 file

Hosts: Ryan Shrout, Josh Walrath, Allyn Malventano and Ken Addison

Program length: 48:41

 

CES 2014: Kingston shows PCIe SSD, comfy headsets, DDR4, and gaming seats

Subject: Storage, Shows and Expos | January 8, 2014 - 10:47 PM |
Tagged: SF3700, Predator, OTG, Need For Seat, kingston, CES 2014, CES

We swing by Kingston this morning to see what was cooking. Here we go:

2014-01-08 13-26-38.JPG

OTG compatible dual micro / standard USB drive that's physically a tiny bit smaller than the Corsair model we saw yesterday.

2014-01-08 13-33-14.JPG

This was probably the most comfortable headset I've ever put on. The padding is real leather wrapped over memory foam, and the arms are aluminum for durability. It really didn't feel like it was on at all, aside from the reduction in background noise from the room, assisted by the denser memory foam.

2014-01-08 13-36-46.JPG

Here is a reference Intel chassis populated with a whopping 384GB of DDR4-2133.

2014-01-08 13-55-40.JPG

This modules were populated with Hynix DDR4 modules.

2014-01-08 13-57-39.JPG

...and this staggering speed and capacity was able to be run by the reference board in multi-channel mode. That's a serious amount of RAM running at a serious speed. Speaking of things running at serious speeds:

2014-01-08 13-37-32.JPG

Here is the Kingston HyperX Predator, a PCIe SSD. The unreleased LSI SandForce SF3700 is capable of 1.8 GB/sec as it is a native PCIe implementation. The only catch is we will have to wait until mid-late 2014 for these to launch. Kingston is ready, but SandForce is not. Here is the 2.5" version of the same, demonstrating that the SF3700 is also capable of configuring for a SATA 6Gb/sec link:

2014-01-08 14-05-07.JPG

We also saw some cool looking "Need For Seat" office / gaming chairs. They were fairly comfortable, and the backs pivot nearly flat, just like the seats in your car:

2014-01-08 14-14-49.JPG

2014-01-08 14-17-39.JPG

In addition to differing looks, each model has a different cushion layout, so I recommend trying to sit in the one you intend to buy prior to doing so.

Coverage of CES 2014 is brought to you by AMD!

PC Perspective's CES 2014 coverage is sponsored by AMD.

Follow all of our coverage of the show at http://pcper.com/ces!

Just how special is Kingston's 10th Anniversary HyperX Kit

Subject: Memory | October 3, 2013 - 05:31 PM |
Tagged: kingston hyper x, kingston, HyperX Genesis 10th Anniversary Special Edition, DDR3-2400, 16GB

Kingston 10th Anniversary HyperX 16GB 2400MHz brings you a DOTA 2 tourney but does it also bring performance to your PC?  This 4x4 kit runs DDR3-2133 @ 11-13-13-30 or DDR3-2400 @ 11-14-14-30 which implies very good performance from these DIMMs at stock speeds.  Of course Overclockers Club were not satisfied with stock speeds and with a little tweaking managed to hit DDR3-2522 @ 12-13-13-33 which was enough to give them a boost in performance without causing instability.  Another feature of these DIMMs many will like is the low profile of the heatspreaders which will allow a much broader choice of CPU heatsink.

OC_9a.jpg

”During my testing I found that while the kit ran flawlessly at its rated speed of 2400MHz, they just did not offer a whole lot of headroom above that, even when pushing 1.75v+ through them. Seeing how running a 125MHz or 166MHz strap is a bit easier on the memory controller, I swapped to the 125MHz divider and started upping the frequency up a little at a time until reaching the maximum clock speed on the HyperX modules. I left the memory sub timings alone and controlled by the board, adjusted the primary timings to 12-13-13-33, adjusted the DRAM voltage to 1.70v, started up again, and finally reached 1260.2MHz or just over 2520MHz for a 120MHz gain in clock speed. That represents about a 5% gain from just testing and tweaking. What I found was that the Kingston HyperX 10th Anniversary modules performed well even with the boosted clock speed. The low profile heat sink makes sure there are no restrictions to the CPU cooling solution used.”

Here are some more Memory articles from around the web:

Memory

Kingston HyperX Holds Global DotA 2, Overclocking Competitions Leading Up to CES 2014

Subject: General Tech, Shows and Expos | October 3, 2013 - 01:41 PM |
Tagged: kingston hyper x, kingston, DOTA 2, competition

Fountain Valley, CA – October 3, 2013 − Kingston Technology Company Inc., the independent world leader in memory products, will soon begin two global competitions to further show its support and commitment to the eSports and the enthusiast community. The HyperX DotA 2 League features 16 of the world’s top professional DotA 2 gaming teams battling for a large cash prize. On October 7, HyperX will begin an open global overclocking competition. The finals for both competitions will be held during 2014 International CES® in Las Vegas, Nevada.

dota2.png

The HyperX DotA 2 League tournament begins later this month with 16 teams competing for a total of $50,000 (USD) in prize money. An additional $40,000 will be offered to cover flight and hotel for the top four teams that advance to battle each other in Las Vegas for the championship. Each match is a best-of-three maps and all matches will be broadcast live so fans can follow the progress of their favorite team. The format and complete competition details can be found here.

Working together with HWBOT, the premier informational website for overclockers and performance enthusiasts, contestants will compete to post the highest benchmarks for Maximum Memory Frequency, Super PI and Intel® XTU. Beginning October 7, there will be an open online qualifying competition lasting four weeks. Winners will be determined weekly with the five final contestants competing in January 2014 during CES. For the finals, components will be supplied by Kingston and its partners: ASUS, Cooler Master and Intel®. Complete rules can be found here.

“The HyperX 2013 DotA 2 tournament will be epic as the best professional gaming teams in the world battle each other and fans will be able to watch every minute live online,” said Annie Leung, HyperX global strategic marketing manager, Kingston. “We are also very excited to hold an overclocking competition globally to see how far HyperX memory can be pushed. Both events will be fun and exciting for gamers and enthusiasts.”

Please visit the Kingston HyperX Website for more information.

hx_x3_detail.png

Kingston is celebrating 25 years in the memory industry. The company was founded on October 17, 1987, and has grown to become the largest third-party memory manufacturer in the world. The 25th anniversary video can be found here along with more information, including a timeline of Kingston's history. In addition, HyperX memory is celebrating its 10th anniversary. The first HyperX high-performance memory module was released in November 2002.

Source: Kingston

Kingston Technology to Demo ECC SO-DIMMs for an Avoton C2000 Microserver and Working DDR4

Subject: General Tech | September 9, 2013 - 02:10 PM |
Tagged: kingston, Avoton, Intel, ddr4

Fountain Valley, CA – September 9, 2013 – Kingston Technology Company, Inc., the independent world leader in memory products, today announced they will be showcasing working DDR4 memory, XMP certified HyperX memory on a new Ivybridge-E based desktop, 2133 MHz SO-DIMMs for a Haswell based notebook and ECC memory in an Avoton based microserver at the Intel Developers Forum (IDF) 2013. IDF will be held at the Moscone center in San Francisco, California on September 10th – 12th .

During IDF 2013 Kingston will be showcasing four demo systems. The DDR4 memory demo will highlight 192GB of working 2133MT/s DDR4 Registered DIMMs at 1.2V operating on a future Intel reference platform. The Kingston HyperX demo will be showcasing the latest HyperX memory that has been validated through Intel's XMP certification process. The demos will be shown using an X79 motherboard and one of Intel's newest Ivybridge E processors. Our 2133 MHz SO-DIMM memory demo will be shown working on a Haswell based notebook. The Microserver demo will be demonstrating 1600 MHz 1.35V low voltage ECC SODIMM memory on an Intel Atom C2000-series “Avoton” microserver. Kingston's ECC SODIMM memory has been validated on the Intel “Edisonville” microserver system, and is posted on Intel's website.

Intel's Avoton System on a Chip (SoCs) is a more powerful chip for use in the microserver market. This chip allows low power machines to handle a broader range of computing workloads. Microservers are quickly gaining in popularity as companies seek powerful, yet more energy- and physical-space efficient solutions that serve specific data center needs or cloud applications. Examples include web and cloud hosting, and big data where terabytes or petabytes of information sets are analyzed per second. Kingston’s low-voltage, high-performing microserver memory modules are the perfect match to help accomplish these tasks.

Kingston is celebrating 25 years in the memory industry. The company was founded on October 17, 1987, and has grown to become the largest third-party memory manufacturer in the world. The 25th anniversary video and information including a timeline of Kingston's history can be found on the anniversary web page. In addition, HyperX memory is celebrating its 10th anniversary. The first HyperX high-performance memory module was released in November 2002.

Source: Kingston

Kingston MobileLite Wireless WiFi Storage device

Subject: Mobile | August 19, 2013 - 02:59 PM |
Tagged: kingston, MobileLite Wireless, wifi, wireless storage

Carting a large sized USB drive around is handy but Kingston has gone one step further with the MobileLite Wireless device which acts as a WiFi router for an attached USB drive or SD card.  It sports a 1800mAh 3.7v battery which should allow for up to 5 hours of usage and up to 3 devices can connect at any time making it a nice WAP you can carry around with you.  By not including any storage media Kingston kept the price down and with SD support you can store quite a bit in the device as long as you purchased a large SD card. The transfer rates that HiTech Legion were seeing were not incredible but would suffice for streaming video and certainly data.

HTL_wifiHDD.jpg

"Kingston MobileLite Wireless is a flexible Wi-Fi storage device that is lightweight and portable. The MobileLite Wireless acts as a USB hub and a card reader when plugged in to a laptop or a desktop computer. When unplugged, the MobileLite Wireless can then be used as a wireless file server, allowing up to three simultaneous wireless device connections to access the data stored on both the USB port or the SD card reader slot when populated."

Here are some more Mobile articles from around the web:

Mobile