Subject: Editorial | May 29, 2015 - 12:37 PM | Ryan Shrout
Tagged: SSD 750, PCI Express, NVMe, Intel, giveaway, contest, 750 series
PC Perspective and Intel are partnering together to offer up a giveaway with some pretty impressive swag. Surely by now you have read all about the new Intel SSD 750 Series of products, a new class of solid state drive that combines four lanes of PCI Express 3.0 and a new protocol called NVM Express (NVMe) for impressive bandwidth throughput. In Allyn's review of the SSD in April he called it "the obvious choice for consumers who demand the most from their storage" and gave it a PC Perspective Editor's Choice Award!
Thanks to our friends at Intel we are going to be handing out a pair of the 400GB add-in card models to loyal PC Perspective readers and viewers. How can you enter? The rules are dead simple:
- Fill out the contest entry form below to find multiple entry methods including reading our review, answering a question about Intel SSD 750 Series specs or following us on Twitter. You can fill out one or all of the methods - the more you do the better your chances!
- Leave a comment on the news post below thanking Intel for sponsoring PC Perspective and for supplying this hardware for us to give to you!
- This is a global contest - so feel free to enter from anywhere in the world!
- Contest will close on June 2nd, 2015.
Our most sincere thanks to Intel for bringing this contest to PC Perspective's readers and fans. Good luck to everyone (except Josh)!
Sponsored by Intel
|Capacity||Seqential 128KB Read (up to MB/s)||Sequential 128KB Write (up to MB/s)||Random 4KB Read (up to IOPS)||Random 4KB Write (up to IOPS)||Form Factor||Interface|
|400 GB||2,200||900||430,000||230,000||2.5-inch x 15mm||PCI Express Gen3 x4|
|1.2 TB||2,400||1,200||440,000||290,000||2.5-inch x 15mm||PCI Express Gen3 x4|
|400 GB||2,200||900||430,000||230,000||Half-height half-length (HHHL) Add-in Card||PCI Express Gen3 x4|
|1.2 TB||2,400||1,200||440,000||290,000||Half-heigh half-length (HHHL) Add-in Card||PCI Express Gen3 x4|
Experience the future of storage performance for desktop client and workstation users with the Intel® SSD 750 Series. The Intel SSD 750 Series delivers uncompromised performance by utilizing NVM Express* over four lanes of PCIe* 3.0.
With both Add-in Card and 2.5-inch form factors, the Intel SSD 750 Series eases migration from SATA to PCIe 3.0 without power or thermal limitations on performance. The SSD can now deliver the ultimate in performance in a variety of system form factors and configurations.
When NVIDIA launched the GeForce GTX Titan X card only back in March of this year, I knew immediately that the GTX 980 Ti would be close behind. The Titan X was so different from the GTX 980 when it came to pricing and memory capacity (12GB, really??) that NVIDIA had set up the perfect gap with which to place the newly minted GTX 980 Ti. Today we get to take the wraps off of that new graphics card and I think you'll be impressed with what you find, especially when you compare its value to the Titan X.
Based on the same Maxwell architecture and GM200 GPU, with some minor changes to GPU core count, memory size and boost speeds, the GTX 980 Ti finds itself in a unique spot in the GeForce lineup. Performance-wise it's basically identical in real-world game testing to the GTX Titan X, yet is priced $350 less that that 12GB behemoth. Couple that with a modest $50 price drop in the GTX 980 cards and you have all markers of an enthusiast graphics card that will sell as well as any we have seen in recent generations.
The devil is in all the other details, of course. AMD has its own plans for this summer but the Radeon R9 290X is still sitting there at a measly $320, undercutting the GTX 980 Ti by more than half. NVIDIA seems to be pricing its own GPUs as if it isn't even concerned with what AMD and the Radeon brand are doing. That could be dangerous if it goes on too long, but for today, can the R9 290X put up enough fight with the aging Hawaii XT GPU to make its value case to gamers on the fence?
Will the GeForce GTX 980 Ti be the next high-end GPU to make a splash in the market, or will it make a thud at the bottom of the GPU gene pool? Let's dive into it, shall we?
Subject: Displays | June 1, 2015 - 12:21 PM | Ryan Shrout
Tagged: nvidia, gsync, g-sync, asus, 3800R
At Computex this week ASUS is showing off a prototype of the new ROG 3800R monitor, a 34-in curved display with a 3440x1440 resolution and G-Sync variable refresh rate capability. ASUS claims on its PCDIY blog that the 21:9 aspect ratio was the one of the "most requested" specifications for a new ROG monitor, followed by a curved design. The result is a gorgeous display:
Here's a list of specifications:
- 34” optimal dimension for QHD resolutions with 3440×1440 resolution
- 21:9 ultra-wide aspect ratio for increased immersion and improved horizontal workflow
- IPS based panel for superior color reproduction, black levels and reduction of color shifting
- NVIDIA G-SYNC equipped offering smooth, fluid and tear free gaming with improved motion clarity. Additionally equipped with ULMB operating mode for outstanding motion clarity.
- Frameless design for seamless surround gaming
- ASUS exclusive GamePlus feature and Turbo Key
- Ergonomic adjustment including tilt, swivel and height adjustment
Hot damn, we want of these and we want it yesterday! There is no mention of the refresh rate of the display here though we did see information from NVIDIA that ASUS was planning a 34x14 60 Hz screen - but we are not sure this is the same model being shown. And the inclusion of ULMB would normally indicate a refresh rate above 60-75 Hz...
Another interesting note: this monitor appears to include both DisplayPort and HDMI connectivity.
This 34-inch 3800R curved display features wide-viewing angles, a 3440 x 1440 native resolution, and 21:9 aspect ratio. It features NVIDIA® G-SYNC™ display technology to deliver smooth, lag-free visuals. G-SYNC synchronizes the display’s refresh rate to the GPU in any GeForce® GTX™-powered PC to eliminate screen tearing and minimizing display stutter and input lag. This results in sharper, more vibrant images; and more fluid and responsive gameplay. It has extensive connectivity options that include DisplayPort and HDMI.
The above information came from ASUS just a few short hours ago, so you can assume that it is accurate. Could this be the start of panels that integrate dual scalars (G-Sync module plus something else) to offer more connectivity or has the G-Sync module been updated to support more inputs? We'll find out!
Subject: General Tech | May 26, 2015 - 02:40 PM | Ryan Shrout
Tagged: video, pcper live, logitechg, logitech, live, giveaway, contest
UPDATE: Did you miss our live stream yesterday? Sorry to hear that! But the good news is that you can still watch the showcase and hear the questions (and answers) on the LogitechG product line. Enjoy!
If you haven't looked up what LogitechG has done lately, you are missing out on some of the most interesting and innovative gaming accessories in the market. My reconnection with the Logitech brand started in July of last year when they sent over the G402 Hyperion Fury gaming mouse, a device with a pair of sensors capable of tracking speeds as high as 28.4 mph - seriously!
Since then the team has been releasing new products and updated software that shows a dedication and drive to the enthusiast and gaming markets. The company's Intelligent Illumination system, that allows game developers to change the colors and brightness of the G910 Orion Spark based on what is happening in the game. Is your health critical? Then maybe you want the keyboard lights to pulse bright red? Or maybe when you jump into a flying vehicle you would like to illuminate the appropriate control keys? All of this is possible.
Besides the cool technology they have to show off, the truth is that Chris, the LogitechG peripheral guru that will be joining me, knows almost everything about keyboards and mice and headsets (oh my!). If you have a question about a specific LogitechG product, or about mice and keyboard technologies in general, this is the guy to ask and the outlet to do it.
LogitechG Showcase, Q&A and Giveaway!!
12pm PT / 3pm ET - May 27th
Need a reminder? Join our live mailing list!
And of course, what would a live stream like this be without some giveaways? Logitech is going to supply hardware to give out during the live stream so you are going to want to be in attendance for sure! But to help build up some excitement, we are going to be giving away combinations of the G402 Hyperion Fury mouse and G440 mousing pad every weekday between now and the live stream! To sign up for the daily giveaways, use the form below. And for a chance to win a whole lot more gaming hardware, make sure you tune in on May 27th at 3pm ET / 12pm PT!!
If you have questions for Chris from Logitech, about mice, keyboards, switches, RGB illumination, tracking technologies - anything - let us know in the comments!
Subject: Processors | May 28, 2015 - 03:44 PM | Scott Michaud
Tagged: Intel, Skylake, skylake-s, haswell, devil's canyon
For a while, it was unclear whether we would see Broadwell on the desktop. With the recently leaked benchmarks of the Intel Core i7-6700K, it seems all-but-certain that Intel will skip it and go straight to Skylake. Compared to Devil's Canyon, the Haswell-based Core i7-4790K, the Skylake-S Core i7-6700K has the same base clock (4.0 GHz) and same full-processor Turbo clock (4.2 GHz). Pretty much every improvement that you see is pure performance per clock (IPC).
Image Credit: CPU Monkey
In multi-threaded applications, the Core i7-6700K tends to get about a 9% increase while, when a single core is being loaded, it tends to get about a 4% increase. Part of this might be the slightly lower single-core Turbo clock, which is said to be 4.2 GHz instead of 4.4 GHz. There might also be some increased efficiency with HyperThreading or cache access -- I don't know -- but it would be interesting to see.
I should note that we know nothing about the GPU. In fact, CPU Monkey fails to list a GPU at all. Intel has expressed interest in bringing Iris Pro-class graphics to the high-end mainstream desktop processors. For someone who is interested in GPU compute, especially with Explicit Unlinked MultiAdapter in DirectX 12 upcoming, it would be nice to see GPUs be ubiquitous and always enabled. It is expected to have the new GT4e graphics with 72 compute units and either 64 or 128MB of eDRAM. If clocks are equivalent, this could translate well over a teraflop (~1.2 TFLOPs) of compute performance in addition to discrete graphics. In discrete graphics, that would be nearly equivalent to an NVIDIA GTX 560 Ti.
We are expecting to see the Core i7-6700K launch in Q3 of this year. We'll see.
Announced just this past June at last year’s Google I/O event, Android TV is a platform developed by Google, running Android 5.0 and higher, that aims to create an interactive experience for the TV. This platform can be built into a TV directly as well as into set-top style boxes, like the NVIDIA SHIELD we are looking at today. The idea is to bring the breadth of apps and content to the TV through the Android operating system in a way that is both convenient and intuitive.
NVIDIA announced SHIELD back in March at GDC as the first product to use the company’s latest Tegra processor, the X1. This SoC combines an 8-core big.LITTLE ARM processor design with a 256-core implementation of the NVIDIA Maxwell GPU architecture, providing GPU performance previously unseen in an Android device. I have already spent some time with the NVIDIA SHIELD at various events and the promise was clearly there to make it a leading option for Android TV adoption, but obviously there were questions to be answered.
Today’s article will focus on my early impressions with the NVIDIA SHIELD, having used it both in the office and at home for a handful of days. As you’ll see during the discussion there are still some things to be ironed out, some functionality that needs to be added before SHIELD and Android TV can really be called a must-buy product. But I do think it will get there.
And though this review will focus on the NVIDIA SHIELD, it’s impossible not to marry the success of SHIELD with the success of Google’s Android TV. The dominant use case for SHIELD is as a media playback device, with the gaming functionality as a really cool side project for enthusiasts and gamers looking for another outlet. For SHIELD to succeed, Google needs to prove that Android TV can improve over other integrated smart TV platforms as well as other set-top box platforms like Boxee, Roku and even the upcoming Apple TV refresh.
But first, let’s get an overview of the NVIDIA SHIELD device, pricing and specifications, before diving into my experiences with the platform as a whole.
Big Things, Small Packages
Sapphire isn’t a brand we have covered in a while, so it is nice to see a new and interesting product drop on our door. Sapphire was a relative unknown until around the release of the Radeon 9700 Pro days. This was around the time when ATI decided that they did not want to be so vertically integrated, so allowed other companies to start buying their chips and making their own cards. This was done to provide a bit of stability for ATI pricing, as they didn’t have to worry about a volatile component market that could cause their margins to plummet. By selling just the chips to partners, ATI could more adequately control margins on their own product while allowing their partners to make their own deals and component choices for the finished card.
ATI had very limited graphics card production of their own, so they often would farm out production to second sources. One of these sources ended up turning into Sapphire. When ATI finally allowed other partners to produce and brand their own ATI based products, Sapphire already had a leg up on the competition by being a large producer already of ATI products. They soon controlled a good portion of the marketplace by their contacts, pricing, and close relationship with ATI.
Since this time ATI has been bought up by AMD and they no longer produce any ATI branded cards. Going vertical when it come to producing their own chips and video cards was obviously a bad idea, we can look back at 3dfx and their attempt at vertical integration and how that ended for the company. AMD obviously produces an initial reference version of their cards and coolers, but allows their partners to sell the “sticker” version and then develop their own designs. This has worked very well for both NVIDIA and AMD, and it has allowed their partners to further differentiate their product from the competition.
Sapphire usually does a bang up job on packaging the graphics card. Oh look, a mousepad!
Sapphire is not as big of a player as they used to be, but they are still one of the primary partners of AMD. It would not surprise me in the least if they still produced the reference designs for AMD and then distributed those products to other partners. Sapphire is known for building a very good quality card and their cooling solutions have been well received as well. The company does have some stiff competition from the likes of Asus, MSI, and others for this particular market. Unlike those two particular companies, Sapphire obviously does not make any NVIDIA based boards. This has been a blessing and a curse, depending on what the cycle is looking like between AMD and NVIDIA and who has dominance in any particular marketplace.
Subject: Graphics Cards | May 26, 2015 - 05:03 PM | Sebastian Peak
Tagged: rumors, nvidia, leaks, GTX 980 Ti, gpu, gm200
Who doesn’t love rumor and speculation about unreleased products? (Other than the manufacturers of such products, of course.) Today VideoCardz is reporting via HardwareBattle a GPUZ screenshot reportedly showing specs for an NIVIDIA GeForce GTX 980 Ti.
Image credit: HardwareBattle via VideoCardz.com
First off, the HardwareBattle logo conveniently obscures the hardware ID (as well as ROP/TMU counts). What is visible is the 2816 shader count, which places it between the GTX 980 (2048) and TITAN X (3072). The 6 GB of GDDR5 memory has a 384-bit interface and 7 Gbps speed, so bandwidth should be the same 336 GB/s as the TITAN X. As far as core clocks on this GPU (which seems likely to be a cut-down GM200), they are identical to those of the TITAN X as well with 1000 MHz Base and 1076 MHz Boost clocks shown in the screenshot.
Image credit: VideoCardz.com
We await any official announcement, but from the frequency of the leaks it seems we won’t have to wait too long.
Subject: Graphics Cards | June 1, 2015 - 02:00 AM | Sebastian Peak
Tagged: Poseidon GTX 980 Ti, GTX 980 Ti, gpu, ASUS ROG
ASUS has already announced a Poseidon version of the new NVIDIA GeForce GTX 980 Ti graphics card, which is part of the company's Republic of Gamers (ROG) lineup.
No photo of the GTX 980 Ti available yet, so here's the GTX 980 version for reference
"ROG Poseidon GTX 980 Ti incorporates the DirectCU H2O hybrid cooling solution with a combined vapor chamber and water channels to give users cooler temperatures along with improved noise reduction for 3x quieter performance. ASUS graphics cards are produced via exclusive Auto-Extreme technology, an industry-first 100% automated process, and feature aerospace-grade Super Alloy Power II components for unsurpassed quality and reliability. ROG Poseidon GTX 980Ti also features GPU Tweak II with XSplit Gamecaster for intuitive performance tweaks and gameplay streaming."
We'll keep you posted on pricing and availability (and actual product photos) once they're available!
Subject: Graphics Cards | May 26, 2015 - 05:29 PM | Sebastian Peak
Tagged: rumors, leaks, Hawaii XT, Fiji, amd radeon
This sounds like disappointing news, but it might be a little misleading as well. First of all the report, another from the folks at VideoCardz, details information about these upcoming GPUs from a leaked driver.
Here’s the list VideoCardz came up with (200-series name on the right):
- AMD6658.1 AMD Radeon(TM) R7 360 Graphics Bonaire XTX [Radeon R7 260X]
- AMD67B0.1 AMD Radeon R9 300 Series Hawaii XT [Radeon R9 290X]
- AMD67B1.1 AMD Radeon R9 300 Series Hawaii PRO [Radeon R9 290]
- AMD6810.1 AMD Radeon(TM) R7 370 Graphics Curacao XT [Radeon R9 270X]
- AMD6810.2 AMD Radeon (TM) R7 300 Series Curacao XT [Radeon R9 270X]
- AMD6811.1 AMD Radeon (TM) R7 300 Series Curacao PRO [Radeon R9 270/370]
- AMD6939.1 AMD Radeon R9 300 Series Tonga PRO [Radeon R9 285]
VideoCardz further comments on this list:
“FIJI was not included in this driver release. Radeon R9 Hawaii is neither shown as R9 380 nor as R9 390. Right now it’s just R9 300, just like R9 285-rebrand. Both Hawaii cards will get a small bump in clock speeds and most importantly 8GB memory.”
And this is where the news might be misleading, as the “300-series” naming may very well not include a new GPU due to AMD shifting to a new scheme for their upcoming flagship, just as NVIDIA has used the “TITAN” and “TITAN X” names for flagship cards. If the rumored AMD Fiji card (which was recently pictured) is the all-new GPU featuring HBM memory that we’ve all been waiting for, expect iterations of this new card to follow as the technology trickles down to the more affordable segment.
Introduction: Improving Portable Sound
The Calyx PaT is very small USB DAC and headphone amp that can be used with PCs and mobile devices, offering the possibility of better sound from just about any digital source. So how does it sound? Let’s find out!
The PaT is a very interesting little device, to be sure. It rather resembles a large domino and weighs less than 1 ounce thanks to an ultra-light aluminum construction. It requires no battery or power source other than its micro USB connection, yet it provides sufficient power (0.8 V output) for in-ear monitors and efficient headphones through its 3.5mm headphone jack. Inside is a proprietary mix of DAC and amplifier circuitry, and like other products produced by Calyx, a Korean company with little presence in the United States, there is the promise of a dedication to great sound. Did Calyx pull it off with the diminutive PaT?
Improving Portable Sound
Outboard DACs and headphone amplifiers for computers and mobile devices are nothing new, with recent products like AudioQuest’s Dragonfly a prime example in the portable USB DAC market (though it offers no mobile support). When I first heard about the PaT during CES it was still in the prototype stage, but I was interested because of the Calyx name if nothing else, as I already owned the Calyx M DAP and had been quite honestly blown away by the sound.
So what need might I have for the interestingly-named PaT (pronounced "paat", meaning "bean" in reference to the small size), which is itself a DAC that requires another device to play music files? It wasn’t until I had the opportunity to speak with Calyx president Seungmok Yi during CES (via video chat as I couldn’t attend the show) that I started realize that this could be a compelling product, not just for the $99 price tag - a bargain for an audiophile product - but because of how versatile the PaT can be. You don't have to identify as an "audiophile" to appreciate the clearer and more detailed sound of a good DAC, especially when so many of us simply haven't heard one (especially on mobile devices).
Subject: General Tech, Systems | June 1, 2015 - 07:30 AM | Tim Verry
Tagged: steam os, living room gaming, liquid cooling, gaming, DIY, corsair, computex 2015, computex, barebones, 4k
Today at Computex, Corsair unveiled a new barebones gaming PC aimed at the living room. The compact Bulldog PC is an upgradeable barebones DIY kit that offers gamers an interesting base from which to build a living room PC capable of 4K gaming. The chassis resembles an overbuilt console in that it is a short but wide design with many angular edges and aesthetic touches including stylized black case feet and red accents surrounding the vents. A hidden panel in the lower right corner reveals two USB 3.0 ports and two audio jacks. It looks ready to fight in the next season of Robot Wars should you add a flamethrower or hydraulic flipper (heh).
The Bulldog kit consists of the chassis, motherboard, small form factor power supply, and a customized Hydro H55F series closed loop liquid CPU cooler. From there, users need to bring their own processor, RAM, and storage devices. There is no operating system included with the kit, but it, being a full PC, supports Windows, Linux, and SteamOS et al.
As far as graphics cards, Corsair is offering several liquid cooled NVIDIA graphics cards (initially only from MSI with other AIB partner cards to follow) that are ready to be installed in the Bulldog PC. Currently, users can choose from the GTX TITAN X, GTX 980, and GTX 970.
Alternatively, Corsair is offering a $99 (MSRP) upgrade kit for existing graphics cards with its Hydro H55 cooler and HG110 bracket.
The Bulldog case supports Mini ITX form factor motherboards and it appears that Corsair is including the Asus Z97I-Plus which is a socket 1150 board supporting Haswell-based Core processors, DDR3 memory, M.2 (though you have to take the board out of the case to install the drive since the slot is on the underside of the board), a single PCI-E 3.0 x16 slot, four SATA 6.0 Gbps ports, and the usual fare of I/O options including USB 3.0, 802.11ac Wi-Fi, and optical and analog audio outputs (among others).
A mini ITX motherboard paired with the small from factor Corsair H55F CPU cooler (left) and the internal layout of the Bulldog case with all components installed (right).
User purchased processors are cooled by the included liquid cooler which is a customized Hydro series cooler that mounts over the processor and exhausts air blower style out of the back of the case. The system is powered by the pre-installed 600W Corsair FS600 power supply. The PSU is mounted in the front of the system and the graphics card radiator and fan are mounted horizontally beside it. Along the left side of the case are mounts for a single 2.5" drive and a single 3.5" drive.
GPU manufacturers will be selling card with liquid coolers pre-installed. Users can also upgrade existing air cooled graphics cards with an optional upgrade kit.
The liquid cooling aspect of the Bulldog is neat and, according to Corsair, is what is enabling them to cram so much hardware together into a relatively small case while enabling thermal headroom for overclocking and quieter operation versus air coolers.
I am curious how well the CPU cooler performs especially as far as noise levels go with the compacted and shrouded design. Also, while there is certainly plenty of ventilation along the sides of the case to draw in cool air, I'm interested in how well the GPU HSF will be able to exhaust the heat since there are no top grilles.
Corsair is marketing the Bulldog as the next step up from your typical Steam Machine and game console and the first 4K capable gaming PC designed for the living room. Further, it would be a nice stepping stone for console gamers to jump into PC gaming.
From the press release:
“Bulldog is designed to take the 4K gaming experience delivered by desktop gaming PCs, and bring it to the big 4K screens in the home,” said Andy Paul, CEO of Corsair Components. “We knew we needed to deliver a solution that was elegant, powerful, and compact. By leveraging our leading expertise in PC case design and liquid cooling, we met that goal with Bulldog. We can’t wait to unleash it on gamers this fall.”
The Bulldog DIY PC kit is slated for an early Q4 2015 launch with a MSRP of $399. After adding in a processor, memory, storage, and graphics, Corsair estimates a completed build to start around $940 with liquid cooled graphics ($600 without a dedicated GPU) and tops out at $2,250.
Keep in mind that the lowest tier liquid cooled GPU at launch will be the MSI GTX 970 (~$340). Users could get these prices down a bit with some smart shopping and component selection along with the optional $99 upgrade kit for other GPU options. It is also worth considering that the Bulldog is being positioned as a 4K gaming machine. If you were willing to start off with a 1080p setup, you could get buy with a cheaper graphics card and upgrade later along with your TV when 4K televisions are cheaper and more widespread.
At its core, $400 for the Bulldog kit (case, quality power supply, high end motherboard, and closed loop CPU cooler) is a decent value that just might entice some console gamers to explore the world of PC gaming (and to never leave following their first Steam sale heh)! It is a big commitment for sure at that price, but it looks like Corsair is using quality components and while there is surely the usual the small form factor part price premium (especially cases), it is far from obnoxious.
What do you think about the bulldog? Is it more bark than bite or is it a console killer?
Introduction and Features
Corsair continues to offer a huge selection of memory products, PC cases, SSDs, power supplies, coolers, gaming peripherals, and PC accessories! The 780T Full-Tower case is one of the new additions to Corsair’s Graphite Series of PC enclosures for 2015 and is available in either black or white. The 780T is a premium case loaded with features that will enable quick, easy, and good-looking builds along with plenty of room and numerous case cooling options. The 780T comes with three 140mm Corsair fans pre-installed with numerous mounting locations for additional fans. The 780T also provides excellent support for liquid cooling with mounting locations for two 360mm radiators. The full-tower enclosure can mount E-ATX and XL-ATX motherboards with room for multiple, high-end graphic adapters up to 14” (355mm) in length. There are currently 16 different models in the Graphite Series ranging in price from $69.99 up to $189.99 USD.
Graphite Series 780T Black ($179.99) Graphite Series 780T White ($189.99)
In this review we will be taking a detailed look at the Graphite Series 780T White Full-Tower case. Here is what Corsair has to say about their new 780T enclosure: “The stunning Graphite Series 780T Full-Tower PC case can satisfy the most hardcore gamer or overclocker with ample room for nine drives and nearly a dozen large cooling fans. Into water cooling? You’ll appreciate the generous space for dual 360mm radiators. And, you’ll get everything done faster: the 780T offers easy maintenance shortcuts like tool-free removal of side panels and hard drives. A three-speed fan control button and generous options for peripheral connections make the front-panel a true time saver.”
Graphite Series 780T Full-Tower Case Key Features:
• Large, Full-Tower PC case (available in black or white)
• Premium design with rounded corners and sleek, cohesive styling
• Latched side panels for easy tool-free access
• Large acrylic side window to show off internal components
• Dual 140mm LED intake fans and a 140mm exhaust fan included
• Locations for up to nine total case fans
• Supports 120mm, 240mm, and 360mm radiators for water-cooling
• Supports XL-ATX, E-ATX, ATX, MicroATX and Mini-ITX motherboards
• Six 3.5” / 2.5” tool-less HDD/SSD bays (can be removed if not needed)
• Three 2.5” tool-less SSD bays
• Three-speed fan control switch on top panel with LED gauge
• Two USB 3.0 and two USB 2.0 ports on top panel
• Two 5.25” front exposed drive bays
• Removable mesh dust filters (front, top, and bottom)
• Up to 355mm (14”) of space for long graphics cards
• Up to 200mm (7.8”) of space for CPU coolers
• Cable routing cutouts to keep cables out of the airflow path
The 780T White Full-Tower case features a beautiful white matte finish with black accents. All internal surfaces finished in black. The two 140mm intake fans behind the front grill incorporate white LEDs (the black version comes with red LEDs).
LG Australia published a product page for their LG 27MU67 monitor, which the rest of the company doesn't seem to acknowledge the existence of. It is still online, even after three days worth of time that someone could have used to pull the plug. This one is interesting for a variety of reasons: it's 4K, it's IPS, and it supports AMD FreeSync. It is also relatively cheap for that combination, being listed at $799 AUD RRP.
Some websites have converted that to ~$610 to $620 USD, but it might even be less than that. Australian prices are often listed with their federal tax rolled in, which would yield a price that is inflated about 10%. It is possible, though maybe wishful thinking, that this monitor could retail in the ~$500 to $550 price range for the United States (if it even comes to North America). Again, this is a 4K, IPS, FreeSync panel.
Very little is posted on LG's website and thus it is hard to tell how good of an IPS panel this is. It is listed as 99% SRGB coverage, which is good for typical video but not the best if you are working on printed content, such as magazine illustrations. On the other hand, this is a gaming panel, not a professional one. Update (May 29, 2015): It also has 10-bit (per channel) color. It sounds like it is true 10-bit, not just a look-up table, but I should note that it doesn't explicitly say that.
Again, pricing and availability is up in the air, because this is not an official announcement. It is listed to launch in Australia for $799 AUD, though.
Subject: Graphics Cards | May 29, 2015 - 11:05 AM | Sebastian Peak
Tagged: rumors, radeon, hbm, graphics, gpu, Fury, Fiji, amd
Another rumor has emerged about an upcoming GPU from AMD, and this time it's a possible name for the HBM-powered Fiji card a lot of us have been speculating about.
The rumor from VideoCardz via Expreview (have to love the multiple layers of reporting here) states the the new card will be named Radeon Fury:
"Radeon Fury would be AMD’s response to growing popularity of TITAN series. It is yet unclear how AMD is planning to adopt Fury naming schema. Are we going to see Fury XT or Fury PRO? Well, let’s just wait and see. This rumor also means that Radeon R9 390X will be a direct rebrand of R9 290X with 8GB memory."
Of course this is completely unsubstantiated, and Fury is a branding scheme from the ATI days, but who knows? I can only hope that if true, AMD will adopt all caps: TITAN! FURY! Feel the excitement. What do you think of this possible name for the upcoming AMD flagship GPU?
Subject: Displays | May 31, 2015 - 06:00 PM | Ryan Shrout
Tagged: nvidia, gsync, g-sync, computex 2015, computex
In conjunction with the release of the new GeForce GTX 980 Ti graphics card today, NVIDIA is making a handful of other announcements around the GeForce brand. The most dramatic of the announcements center around the company's variable refresh monitor technology called G-Sync. I assume that any of you reading this are already intimately familiar with what G-Sync is, but if not, check out this story that dives into how it compares with AMD's rival tech called FreeSync.
First, NVIDIA is announcing a set of seven new G-Sync ready monitors that will be available this summer and fall from ASUS and Acer.
Many of these displays offer configurations of panels we haven't yet seen in a G-Sync display. Take the Acer X34 for example: this 34-in monitor falls into the 21:9 aspect ratio form factor, with a curved screen and a 3440x1440 resolution. The refresh rate will peak at 75 Hz while also offering the color consistency and viewing angles of an IPS screen. This is the first 21:9, the first 34x14 and the first curved monitor to support G-Sync, and with a 75 Hz maximum refresh it should provide a solid gaming experience. ASUS has a similar model, the PG34Q, though it peaks at a refresh rate of 60 Hz.
ASUS will be updating the wildly popular ROG Swift PG278Q display with the PG279Q, another 27-in monitor with a 2560x1440 resolution. Only this time it will run at 144 Hz with an IPS screen rather than TN, again resulting in improved color clarity, viewing angles and lower eye strain.
Those of you on the look out for 4K panels with G-Sync support will be happy to find IPS iterations of that configuration but still will peak at 60 Hz refresh - as much a limitation of DisplayPort as anything else though.
Another technology addition for G-Sync with the 352-series (353-series, sorry!) driver released today is support for windowed mode variable refresh.
By working some magic with the DWM (Desktop Window Manager), NVIDIA was able to allow for VRR to operate without requiring a game to be in full screen mode. For gamers that like to play windowed or borderless windowed while using secondary or large displays for other side activities, this is a going to a great addition to the G-Sync portfolio.
Finally, after much harassment and public shaming, NVIDIA is finally going to allow users the choice to enable or disable V-Sync when your game render rate exceeds the maximum refresh rate of the G-Sync monitor it is attached to.
One of the complaints about G-Sync has been that it is restrictive on the high side of the VRR window for its monitors. While FreeSync allowed you to selectively enable or disable V-Sync when your frame rate goes above the maximum refresh rate, G-Sync was forcing users into a V-Sync enabled state. The reasoning from NVIDIA was that allowing for horizontal tearing of any kind with G-Sync enabled would ruin the experience and/or damage the technology's reputation. But now, while the default will still be to keep V-Sync on, gamers will be able to manually set the V-Sync mode to off with a G-Sync monitor.
Why is this useful? Many gamers believe that a drawback to V-Sync enabled gaming is the added latency of waiting for a monitor to refresh before drawing a frame that might be ready to be shown to the user immediately. G-Sync fixes this from frame rates of 1 FPS to the maximum refresh of the G-Sync monitor (144 FPS, 75 FPS, 60 FPS) but now rather than be stuck with tear-free, but latency-added V-Sync when gaming over the max refresh, you'll be able to play with tearing on the screen, but lower input latency. This could be especially useful for gamers using 60 Hz G-Sync monitors with 4K resolutions.
Oh, actually one more thing: you'll now be able to enable ULMB (ultra low motion blur) mode in the driver as well without requiring entry into your display's OSD.
NVIDIA is also officially announcing G-Sync for notebooks at Computex. More on that in this story!
Subject: Graphics Cards | June 1, 2015 - 06:00 AM | Ryan Shrout
Tagged: maxwell, hydro copper, GTX 980 Ti, gm200, evga, computex 2015, computex, classified, acx
With the release of the brand new GeForce GTX 980 Ti from NVIDIA stirring up the week just before Computex in Taipei, you can be sure that all of NVIDIA's partners are going to be out in force showing off their custom graphics card solutions.
EVGA has several lined up and they were able to share some information with us. First up is the standard but custom cooled GTX 980 Ti that uses the ACX 2.0+ cooler. This new version of the ACX 2.0 cooler includes a "memory MOSFET Cooling Plate (MMCP) reduces MOSFET temperatures up to 13%, and optimized Straight Heat Pipes (SHP) additionally reduce GPU temperature by 5C. ACX 2.0+ coolers also feature optimized swept fan blades, double ball bearings and an extreme low power motor, delivering more air flow with less power, unlocking additional power for the GPU." We're looking forward to some hands-on testing with this card when it shows up on Monday morning.
Also due for an update is the EVGA Classified line, often considered one of the best cards you can buy for overclockers and extreme enthusiasts. Though the card is also using the ACX 2.0+ cooler it will include additional power delivery improvements on the PCB that help stretch available performance headroom.
Following in the footsteps of the recently released Titan X Hybrid comes the GTX 980 Ti version. This card will use a standard blower cooler for the memory and power delivery while attaching a self-contained water cooler for the GPU itself. This should keep the GPU temperature down quite a bit though the benefit to real-world overclocking is debatable with the voltage lock that NVIDIA has kept in place. If only they were to change that...
Finally, for the water cooling fans among us we have the GTX 980 Ti Hydro Copper, using a water block from EK.
Interested in clock speeds?
- EVGA 980 Ti ACX 2.0
- Base: 1000 MHz
- Boost: 1076 MHz
- Memory: 7010 MHz
- EVGA 980 Ti Classified
- Base: 1152 MHz
- Boost: 1241 MHz
- Memory: 7010 MHz
- EVGA 980 Ti Hybrid
- Base: 1140 MHz
- Boost: 1228 MHz
- Memory: 7010 MHz
I am still waiting for pricing and availability information which we will pass on as soon as we get it!
Subject: Systems | June 1, 2015 - 02:00 AM | Ryan Shrout
Tagged: vivopc, vc65, g11cb, computex 2015, computex, asus
First, don't get too excited: there isn't much information that has been confirmed with this announcement. But I did find it interesting that ASUS launched not one but two different systems using 6th Generation Intel Core processors, codenamed Skylake. No specifications, no pricing, no time for release; but they do offer varied specifications.
The ASUS G11CB is a gaming desktop PC that is powered by a 6th generation Intel Core processor and a NVIDIA GeForce GTX 980 graphics card. It delivers impressive high-speed performance, with M.2 SSD, DDR4 SDRAM, and USB 3.1. The G11CB has an aggressively-designed chassis, with a central zone on its front façade showcasing 8-million color LED light effects, with three red-lit “flames” on its flanks. Aegis II software improves the overall gaming experience, with GameAlive allowing gamers to record and edit their game videos to share on social media sites.
ASUS VivoPC VC65 is the latest flagship in the VivoPC line. VivoPC VC65 is powered by a 6th generation Intel Core i processor. VivoPC VC65 provides flexible storage options and can accommodate a total of two storage drives. VivoPC accepts both solid-state drives (SSD) and hard disk drives; with RAID support giving users the option to use it as a mini server or NAS. It can also serve as a media library to provide users with non-stop entertainment; and allows for easy software installation through its optical disc drive. VivoPC does away with an external power adapter, resulting in neater, clutter-free placement options; it can even be VESA-mounted.
The G11CB will be a true desktop system with the added weight of a GeForce GTX 980 for gaming performance. Note that the system does use DDR4 memory, confirming that Skylake will utilize it, as expected. The smaller, more business friendly VC65 uses Skylake but for general computing. ASUS actually is pitching the VC65 as a mini server or NAS with its flexible storage options. Can you do that with your VESA-mounted PC??
Subject: Graphics Cards | May 29, 2015 - 11:26 AM | Ryan Shrout
Tagged: catalyst, amd, 15.5 beta
Last night AMD released a new Catalyst driver, 15.5 Beta, that targets performance improvements in both Project Cars and The Witcher 3: Wild Hunt. You can pick up the new driver for both 32-bit and 64-bit versions of Windows 7 and Windows 8.1 right here. The full display driver version is 14.502.1014.1001.
The specific changes?
Highlights of AMD Catalyst™ 15.5 Beta Windows Driver
Crossfire Profile Update for:
- The Witcher 3 - Wild Hunt
Performance Improvements for the following :
- The Witcher 3 - Wild Hunt : Up to 10% performance increase on single GPU Radeon R9 and R7 Series graphics products
- Project Cars - Up to 17% performance increase on single GPU Radeon R9 and R7 Series graphics products
Users of the Radeon R9 295X2 will be glad to see support for their hardware added for The Witcher 3 and just about everyone will be glad to see some dramatic performance improvements in Project Cars and Witcher 3. We know from testing internally as well as widely reported issues that AMD Radeon graphics cards had issues with Project Cars, resulting in performance well behind comparable NVIDIA GeForce hardware. With as much as 17% improvement for Radeon R9 and R7 hardware though, hopefully that frame rate increases quite a bit.
We'll be doing some testing with this new driver here today, and if anything jumps out at us, we'll be sure to let you know!
Introduction and First Impressions
Phanteks has expanded their Enthoo enclosure lineup with a new ATX version of the popular EVOLV case, and it offers a striking design and some unique features to help it stand out in the mid-tower market.
Phanteks first came to my attention with their large double tower cooler PH-TC14, which competes directly with the Noctua NH-D14 in the CPU air-cooling market. But like a lot of other cooling companies (Cooler Master, Corsair, etc.) Phanteks also offers a full lineup of enclosures as well. Of these the Enthoo EVOLV, which until today has only been available in a micro-ATX and mini-ITX version, has been well-received and has a angular, minimalist look that I like quite a bit. Enter the EVOLV ATX.
With the larger size to this new EVOLV ATX there is not only room for a full-size motherboard, but much more room for components and cooling as well. The internal layout is very similar to the recently reviewed Fractal Design Define S enclosure, with no storage (5.25” or 3.5”) inside the front of the case, which gives the EVOLV ATX a totally open layout. The front is solid metal (though well vented) so we’ll see how this affects cooling, and it will be interesting to see how Phanteks has approached internal storage with the design as well. Let’s get started!
- 1 of 3