Introduction and Features
SilverStone Technology Inc. continues to focus attention on providing compact power supply solutions. Earlier this year we looked at the SilverStone SX700-LPT, which packed 700 watts into an extended SFX chassis. In this review we are going to check out SilverStone’s ST85F-PT, which packs 850W into a compact ATX enclosure. While the typical 850W ATX power supply measures 180mm (7.1”) deep, the Strider Platinum Series 850W unit is housed in a 140mm chassis (5.5”). This results in a power density of 471W per liter.
The Strider Platinum Series now includes four compact models, the ST55F-PT (550W), ST65F-PT (650W), ST75F-PT (750W) and ST85F-PT (850W), which SilverStone claims are the smallest fully modular ATX power supplies with 80 Plus Platinum efficiency. All of the Strider Platinum Series PSUs are designed to provide quiet, reliable operation. The 120mm cooling fan incorporates a Fluid Dynamic Bearing (FDB) and an intelligent fan control permits fanless operation at low power. Overall performance is optimized with tight voltage regulation and low AC ripple on the DC outputs.
SilverStone Strider Platinum Series Key Features:
• 550W, 650W, 750W and 850W DC power output
• Compact design with a depth of only 140mm for easy integration
• High efficiency with 80 Plus Platinum certification
• 100% Modular cables
• Intelligent semi-fanless operation
• Quiet 120mm cooling fan with Fluid Dynamic Bearing
• 24/7 Continuous power output with 40°C operating temperature
• Strict ±3% voltage regulation and low AC ripple
• Dedicated single +12V rail
• Universal AC input (90-264V) with Active PFC
• DC Output protections: UVP, OVP, OPP, SCP, OCP, and OTP
• Dimensions: 150mm (W) x 86mm (H) x 140mm (L)
• 5-Year warranty
• MSRP : $159.99 USD (850W model)
Subject: General Tech | September 8, 2016 - 04:27 PM | Jeremy Hellstrom
Tagged: gaming, dx 12, deus ex: mankind divided, Crimson Edition 16.9.1, amd
As of today you can now try out Deus Ex: Mankind Divided with DX12 enabled if you enable beta content in the game. The fifth patch offers several bug fixes but it also allows you to try out DX12 on your system. You can see where to head on your Steam client if you have never played with beta settings before. Once you have enabled beta content and Steam has synced, you will see a DirectX 12 option in the game's Display Options, assuming your card supports it.
For AMD users this should bring performance improvements as long as you first upgrade to the newly released Crimson Edition 16.9.1 driver which you can grab right here. The release notes from Edios/Square Interactive state that 'There are no visual or gameplay differences between the two DirectX versions.' so you will not see new features in your game. The new patch also states that it does not support multiple GPUs in DX12 so ensure you are only using a single card.
We have not been able to test the new patch or driver as of yet, however Guru of 3D did post some quick results in an update to their review of the game. AMD's RX 480, R9 390X and Fury X all see some improvements in 1080p and 1440p but at 4k the card's performance is already topped out. NVIDIA's cards all showed a slight drop at lower resolutions and like AMD, 4k performance is unchanged. The new DX12 patch is not enough to unseat the TITAN X and GTX 1080 as the top performers though.
If you have any issues when playing the game simply disable DX12 and get back to your game. We should see more patches in the near future as the game developers and the two GPU providers work on improving compatibility.
Subject: General Tech | September 8, 2016 - 02:32 PM | Jeremy Hellstrom
Tagged: laguz, audio, Kennerton, earbuds
Though they somewhat resemble tiny microphones, these Kennerton Audio Laguz are indeed in-ear headphones. They may not work on the new iPhone without an adapter but for anything else the standard plug will work just fine. These $110 earbuds have tiny 8mm dynamic driver with a frequency response of 20Hz to 20kHz. The metal body and stress relief should ensure these headphones last a while but the price is somewhat steep, then again TechPowerUp didn't seem to find that price off-putting.
"Kennerton Audio's newest mid-end offering, the Laguz, is put to the test. Priced at $110, it will face fierce competition from the Brainwavz S5 and HiFiMAN RE-400. The Laguz is absolutely tiny and features a rugged aluminum design that is pretty unique."
Here is some more Tech News from around the web:
- Powerbeats 2 Wireless Headset @ Hardware Secrets
- LucidSound LS-30 Wireless Universal Gaming Headset Review @ NikKTech
- Logitech G633 Artemis Spectrum RGB 7.1 Surround Gaming Headset Review @ NikKTech
- Cooler Master MasterPulse Over-Ear With Bass FX @ eTeknix
Subject: General Tech | September 8, 2016 - 01:28 PM | Ryan Shrout
Tagged: Zen, VR, video, ssd, sony, qualcomm, ps4 pro, ps4, prodigy, power9, podcast, phanteks, logitech, iPhone 7, Intel, IBM, gtx 1050, geekbench, Enthoo, corsair, carbide, amd, a10, 600p
PC Perspective Podcast #416 - 09/08/16
Join us this week as we discuss the Intel SSD 600p, Leaked Zen Performance, new iPhone and PS4 and more!
The URL for the podcast is: http://pcper.com/podcast - Share with your friends!
- iTunes - Subscribe to the podcast directly through the Store (audio only)
- Google Play - Subscribe to our audio podcast directly through Google Play!
- RSS - Subscribe through your regular RSS reader (audio only)
- MP3 - Direct download link to the MP3 file
Hosts: Ryan Shrout, Allyn Malventano, Josh Walrath and Jeremy Hellstrom
Week in Review:
News items of interest:
Razer PAX 2016
Hardware/Software Picks of the Week
Josh: 4K Blu-ray! And Games!
Subject: General Tech | September 8, 2016 - 01:20 PM | Jeremy Hellstrom
Tagged: mcafee, Intel, antivirus
In a strange turn of events it seems that McAfee has risen once again to appear on the marketplace in a move reminiscent of a certain Uncle Duke story line. Intel has sold their majority stake, worth $3.1bn in cash, to a private equity firm called TPG. Intel retains 49% of the shares, not quite breaking even on the purchase they made back in 2010 but having seen solid profits from that business while they were running it. TPG has now renamed itself McAfee and Chris Young, the general manager of Intel Security will be a part of the new team. Pop by The Register for more on the antivirus company that just keeps coming back, but there is no word as of yet from the company's namesake.
"Intel is selling off a majority stake in its security software arm – formerly known as McAfee – to private equity firm TPG, which will rename itself to, er, McAfee."
Here is some more Tech News from around the web:
- Nexmon Turns Nexus 5 (and RPi3!) Into WiFi Toolkit @ Hack a Day
- Microsoft To Launch At Least One Surface All-In-One PC Next Month @ Slashdot
- The honor 8 Smartphone With Aurora Glass Revealed @ Tech ARP
- iPhone what? Raspberry Pi has shipped 10 million computers @ The Inquirer
- Samsung lowering foundry quotes to vie for orders @ DigiTimes
- Scientists' sneaky smartphone software steals 3D printer designs @ The Register
- Intel Basis fans burned again: Refund checks for scalding smartwatches bounce @ The Register
Subject: General Tech | September 7, 2016 - 09:18 PM | Scott Michaud
Tagged: sony, ps4, ps4 pro, microsoft, Project Scorpio, xbox
At today's media briefing event, Sony announced two new versions of their PlayStation 4 console. The first is not even given a new name; they are just referring to it as the “new slimmer and lighter PS4” in their marketing material. It replaces the current version with one that is about 30% smaller, 16% lighter, and 28% more power efficient, according to a press release provided by AMD.
This update will be sold for $299.99 USD ($379.99 CDN) starting on September 15th.
The main topic of discussion was the PlayStation 4 Pro, though. Like Microsoft is doing with Project Scorpio, Sony wants the PS4 Pro to be compatible with the same catalog of titles, but do so at higher resolution and color depths. Sony claims that this generation is basically maxing out what can be done with 1080p. PC developers do not seem to have a problem using performance for new features, but the point that development costs are quickly becoming the limiting factor is valid to some extent.
In terms of specifications, while the CPU got an unspecified speed bump, the main upgrade is a new GPU, which is rated at 4.2 TFLOPs. This is about 30% slower than Microsoft's announced Project Scorpio (6 TFLOPs) but it also will arrive a year sooner. Will this lead time matter, though? The software catalog is already being built up by both companies, and it has been since each console launched in 2013.
Did they ever explain the extra ring on the case?
Also, because Microsoft started with a weaker console, scaling up to 4K resolution should be easier for their game developers. Project Scorpio is about 4.6x faster than the Xbox One, and it intends to draw four times the number of pixels. The gap between the PS4 and the PS4 Pro is just 2.3x. That could be a problem for them. (Meanwhile, us PC gamers can strap multiple 10+ TFLOP GPUs together for true 4K at decent frame rates, but that's another discussion.)
Granted, theoretical is different than real-world. We'll need to re-evaluate the industry in a couple of years, once an appropriate amount of hindsight is available. Also, Sony claims that PlayStation VR will still be available for both consoles, and that it will be a good experience whatever you choose. This is clearly aimed at Microsoft requiring Project Scorpio for their upcoming VR initiative, although likely to prevent confusion in their own fan base, rather than prodding their competitor.
Again, the PlayStation 4 Pro is launching this year, November 10th, and is expected to retail for $399.99 USD ($499.99 CDN). It's not a big jump in performance, but it's also not a big jump in price, either. In fact, I would consider it priced low enough to question the value of the regular PS4, even at $299.
What are your thoughts? Is this actually priced too low for pro?
Subject: Mobile | September 7, 2016 - 09:16 PM | Sebastian Peak
Tagged: smartphone, mobile, iPhone 7 Plus, iPhone 7, iphone, DCI P3, apple, a10
Another Apple announcement is in the books, and with it comes the expected refresh to the iPhone lineup. The new iPhone 7 and 7 Plus offer some notable upgrades from the previous models, though it's the lack of a 3.5 mm headphone jack that has been getting much of the attention.
Looking past the omission of the headphone jack for a moment, what exactly is new and noteworthy here? For starters, the iPhone 7 brings a new SoC to the table with the A10, a new design that is Apple's first foray into a "big.LITTLE" type of configuration. Unlike the A9 SoC's processor, a dual-core 1.85 GHz design, the A10 now offers a pair of high-performance cores, and a pair of high-efficiency cores that Apple says require only 1/5 of the larger pair's power. This sort of processor configuration is obviously similar to a number of existing ARM designs, which similarly combine faster and slower cores in an effort to reduce power consumption - though the 1/5 number is significant. It will be enlightening to see what the actual core speeds are - as well as particulars on the GPU, which is "50% faster" than the A9's PowerVR GT7600.
Other major updates include the cameras, which now features optical image stabilization (OIS) in the regular 7 as well as the 7 Plus (it was a 6/6s Plus-exclusive feature previously). The camera - or rather cameras - on the iPhone 7 Plus provide separate wide-angle and telephoto lenses, and allow for some powerful depth-of-field effects as demoed during the presentation. The displays contain another significant update - but not in resolution. The previous (low) 750x1344 resolution from the 6s remains in the iPhone 7, with the 7 Plus sticking to 1080x1920. The upgrade comes from the backlighting, which now provides 25% greater brightness and much wider color from the DCI P3 color space.
The lack of a 3.5 mm headphone jack was rumored for months leading up to today's announcement, and of course it will be a controversial topic. The Lightning connector is the only port on the iPhone 7/7 Plus, and Lightning-connected earbuds are included along with a 3.5 mm adapter (which also includes the DAC and headphone amp). The new haptic motor for the new non-mechanical home button is partly to blame for the omission of the headphone jack, but might also have been removed as part of the process to make the iPhone water resistant - a first for Apple.
Wireless earbuds ("AirPods") were also announced, which look pretty much like the existing "EarPods" with the cord cut off. One final note on sound: the new iPhones have stereo speakers for the first time, with sound claimed to be 50% louder than previous, and now emanating from both ends of the phone.
The family of iPhones now includes the new iPhone 7 and 7 Plus, along with existing 6s, 6s Plus, and the iPhone SE. In a surprising move, Apple announced that they would upgrade last year's 6s models to shipping with double the base storage - 32GB vs. 16GB - for the same price.
Pre-orders for the new iPhones begin on September 9th, with pricing beginning at $649 for the 32GB iPhone 7, and $769 for the 32GB iPhone 7 Plus.
Subject: Motherboards, Processors | September 7, 2016 - 08:08 PM | Tim Verry
Tagged: Zen, Summit Ridge, Excavator, Bristol Ridge, amd, A12-9800
This week AMD officially took the wraps off of its 7th generation APU lineup that it introduced back in May. Previously known as Bristol Ridge, AMD is launching eight new processors along with a new desktop platform that finally brings next generation I/O to AMD systems.
Bristol Ridge maintains the Excavator CPU cores and GCN GPU cores of Carrizo, but on refreshed silicon with performance and power efficiency gains that will bring the architecture started by Bulldozer to an apex. These will be the last chips of that line, and wil be succeeded by AMD's new "Zen" architecture in 2017. For now though, Bristol Ridge delivers as much as 17% higher per thread CPU performance and 27% higher graphics performance while using significantly lower power than its predecessors. Further, AMD has been able to (thanks to various process tweaks that Josh talked about previously) hit some impressive clock speeds with these chips enabling AMD to better compete with Intel's Core i5 offerings.
At the top end AMD has the (65W) quad core A12-9800 running at 3.8 GHz base and 4.2 GHz boost paired with GCN 3.0-based Radeon R7 graphics (that support VP9 and HEVC acceleration). These new Bristol Ridge chips are able to take advantage of DDR4 clocked up to 2400 MHz. For DIY PC builders planning to use dedicated graphics, AMD has the non-APU Athlon X4 950 which features four CPU cores at 3.5 GHz base and 3.8 GHz boost with a 65W TDP. While it is not clocked quite as high as its APU counterpart, it should still prove to be a popular choice for budge builds and will replace the venerable Athlon X4 860 and will also be paired with an AM4 motherboard that will be ready to accept a new Zen-based "Summit Ridge" CPU next year.
The following table lists the eight new 7th generation "Bristol Ridge" processors and their specifications.
|CPU Cores||CPU Clocks Base / Boost||GPU||GPU CUs||GPU Clocks (Max)||TDP|
|4||3.8 GHz / 4.2 GHz||Radeon R7||8||1,108 MHz||65W|
|A12-9800E4||4||3.1 GHz / 3.8 GHz||Radeon R7||8||900 MHz||35W|
|A10-9700||4||3.5 GHz / 3.8 GHz||Radeon R7||6||1,029 MHz||65W|
|A10-9700E||4||3.0 GHz / 3.5 GHz||Radeon R7||6||847 MHz||35W|
|A8-9600||4||3.1 GHz / 3.4 GHz||Radeon R7||6||900 MHz||65W|
|A6-9500||2||3.5 GHz / 3.8 GHz||Radeon
|A6-9500E||2||3.0 GHz / 3.4 GHz||Radeon
|Athlon X4 950||4||3.5 GHz / 3.8 GHz||None||0||N/A||65W|
To expand on the performance increases of Bristol Ridge, AMD compared the A12-9800 to the previous generation A10-8850 as well as Intel's Core i5-6500. According to the company, the Bristol Ridge processor handily beats the Carrizo chip and is competitive with the Intel i5. Specifically, when comparing Bristol Ridge and Carrizo, AMD found that the A12-9800 scored 3,521.25 in 3DMark 11 while the A10-8850 (95W Godavari) scored 2,880. Further, when compared in Cinebench R11.5 1T the A12-980 scored 1.21 versus the A10-8850's 1.06. Not bad when you consider that the new processor has a 30W lower TDP!
With that said, the comparison to Intel is perhaps most interesting to the readers. In this case, the A12-9800 is about where you would expect though that is not necessarily a bad thing. It does pull a bit closer to Intel in CPU and continues to offer superior graphics performance.
|AMD A12-9800 (65W)||Intel Core i5-6500 (65W)||AMD A10-8850 (95W)|
3DMark 11 Performance
|PCMark 8 Home Accelerated||3,483.25||3,702||Not run|
|Cinebench R11.5 1T||1.21||Not run||1.06|
Specifically, in 3DMark 11 Performance the A12-9800's score of 3,521.25 is quite a bit better than the Intel i5-6500's 1,765.75 result. However, in the more CPU focused PCMark 8 Home Accelerated benchmark the Intel comes out ahead with a score of 3,702 versus the AMD A12-9800's score of 3,483.25. If the price is right Bristol Ridge does not look too bad on paper, assuming AMD's testing holds true in independent reviews!
The AM4 Platform
Alongside the launch of desktop 7th generation APUs, AMD is launching a new AM4 platform that supports Bristol Ridge and is ready for Zen APUs next year. The new platform finally brings new I/O technologies to AMD systems including PCI-E 3.0, NVMe, SATA Express, DDR4, and USB 3.1 Gen 2.
According to Digital Trends, AMD's AM4 desktop platform wil span all the way from low end to enthusiast motherboards and these boards will be powered by one of three new chipsets. The three new chipsets are the B350 for mainstream, A320 for "essential," and X/B/A300 for small form factor motherboards. Notably missing is any mention of an enthusiast chipset, but one is reportedly being worked on and will arive closer to the launch of Zen-based processors in 2017.
The image below outlines the differences in the chipsets. Worth noting is that the APUs themselves will handle the eight lanes of PCI-E 3.0, dual channel DDR4, four USB 3.1 Gen 1 ports, and two SATA 6Gbps and two NVMe or PCI-E 3.0 storage devices. This leaves PCI-E 2.0, SATA Express, additional SATA 6Gbps, and USB 3.1 Gen 2 connection duties to the chipsets.
As of today, AMD has only announced the availability of AM4 motherboards and 7th generation APUs for OEM systems (with design wins from HP and Lenovo so far). The company will be outlining the channel / DIY PC builder lineup and pricing at a later (to be announced date).
I am looking forward to Zen and in a way the timing of Bristol Ridge seems strange. On the other hand, for OEMs it should do well and hold them over until then (heh) and enthusiasts / DIY builders are able to buy into Bristol Ridge knowing that they will be able to upgrade to Zen next year (while getting better than Carrizo performance with less power and possibly better overclocking) is not a bad option so long as the prices are right!
The full press blast is included below for more information on how they got their benchmark results.
Subject: Graphics Cards | September 7, 2016 - 08:02 PM | Scott Michaud
Tagged: dirty pool, nvidia, geforce experience, geforce
Update (September 7th @ 9:34pm): It's been pointed out in our comments that the new GeForce Experience cannot be used without logging in. It supports NVIDIA, Google, and Facebook accounts.
It's been in Beta for a while, but NVIDIA has just officially launched their new GeForce Experience application. The release version is 188.8.131.52, so be sure to check for updates if you were in the beta and your settings panel shows an earlier version. Also, there's an “allow experimental features” checkbox right under the version number, too, also in the settings panel. It defaults to on for me, so you might want to take a look if you use GeForce Experience for anything professional (ex: Twitch streaming).
Anywho, the new version runs a lot better for me than the previous one. I used to have quite long load times, often literally in the minutes, with version 2. With version 3, it often pops up in less than a second, or maybe a couple of seconds at the worst.
Obviously, if you don't use GeForce Experience, then you don't really need to update. WHQL drivers can still be downloaded from their website (although installing drivers through GeForce Experience 3.0 has been fairly bug-free for me) and most of its other features can be obtained with other applications, like OBS Studio. That said, it's free and pretty good, so it's worth giving it a try.
Subject: Graphics Cards | September 7, 2016 - 03:41 PM | Jeremy Hellstrom
Tagged: GTX 1080 STRIX GAMING, asus, GTX 1080, aerogel
ASUS has updated their GTX 1080 Strix with a few more features than the previous models in this family. The aesthetics are a bit different but there is more to the card than that, hidden under the front edge of the card are two four pin fan headers which allow you to connect two case fans to the card which will react according to the heat load on the GPU. The new DirectCU cooler has five copper heatpipes and the PCB has eight-plus-two power-phases. There are two models, the ROG Strix-GTX1080-A8G-Gaming and the ROG Strix-GTX1080-O8G-Gaming, with core speeds of 1670/1809MHz and 1759/1898MHz respectively. The Tech Report tested out the first of those two cards, see how it matches up to the competition here.
"Asus' graphics cards are favorites of ours at TR, so we were excited when the ROG Strix GeForce GTX 1080 landed in our labs. We put it to the test to see whether Asus gave Pascal a good set of wings."
Here are some more Graphics Card articles from around the web:
- he NVIDIA GeForce GTX 1070 Founder’s Edition @ TechARP
- MSI GTX 1060 Gaming X 3 GB @ techPowerUp
- SAPPHIRE NITRO+ Radeon RX 480 @ Modders-Inc
Subject: General Tech | September 7, 2016 - 01:30 PM | Jeremy Hellstrom
Tagged: gaming, onward, VR, htc vive, Downpour Interactive
Next up in [H]ard|OCP's series of VR game testing is Downpour Interactive's Onward, currently in early access and only available on the HTC Vive. As with previous testing this is not about benchmarking the greatest GPU for the game but focuses on the experience you will have playing the game on different GPUs. Frames dropping out or lagging on a monitor is mildly annoying but can completely ruin your day when using a VR headset. This one turned out to be quite a challenge, even the GTX 1080 had significant frame reproductions.
"Downpour Interactive is the company behind the Early Access Game, Onward. It is a self-proclaimed Mil-Sim shooter title. The big thing about this is it looks to be the first VR game that has solid support for multiplayer missions. HTC Vive currently required. What video card do we need this time around for best performance?"
Here is some more Tech News from around the web:
- Meet Titanfall 2’s New Titans @ Rock, Paper, SHOTGUN
- Tricking Duck Hunt to See A Modern LCD TV as CRT @ Hack a Day
- Cyberpunk 2077 development team is CD Projekt's biggest yet @ HEXUS
- Cool Movement Tricks In Throwback Arena FPS Toxikk @ Rock, Paper, SHOTGUN
- Duke Nukem 3D: 20th Anniversary World Tour arrives on 11th Oct @ HEXUS
- Do It Yourself With The Humble GameMaker Bundle @ Rock, Paper, SHOTGUN
Subject: General Tech | September 7, 2016 - 12:25 PM | Jeremy Hellstrom
Tagged: iot, security, ssh, idiots
The research that SEC Consult has conducted shows that almost half of all IoT devices, from your router straight through to devices in hospitals and factories use public SSH host keys and X.509 certificates. Since these keys are known far and wide it is depressingly easy to break the encryption on any communications from these devices and harvest passwords and other data or even to change the contents of that package on the fly. Imagine a heart monitor which reports a strong heartbeat long after the patient has died or a large machine in a power plant being given different readings to allow it to exceed safety margins and destroy itself. This is only getting worse, as many companies creating these IoT devices are either trying to save money by using packaged software or in some cases are totally ignorant of the effect of reusing keys.
If you can, change your keys to be device specific and isolate them on your network. As The Register unhappily points out, this is not something your average consumer or purchasing department is aware of, let alone proficient enough to change keys on their devices.
"Millions of internet-facing devices – from home broadband routers to industrial equipment – are still sharing well-known private keys for encrypting their communications."
Here is some more Tech News from around the web:
- Apple lists the iPhone 7 and iPhone 7 Plus on its own bloody website @ The Inquirer
- AMD unwraps its seventh-generation desktop APUs and AM4 platform @
- Testing the Right Things with Docker @ Linux.com
- Linux creator Torvalds has another expletive-filled rant at the community @ The Inquirer
- FCC goes over the top again to battle America's cable-box rip-off @ The Register
- US tech college ITT is not pining for the fjords. It is no more. It has gone and met its maker @ The Register
- Nitro Concepts E200 Race Chair @ Kitguru
- The Affordable honor 5A Smartphone Revealed @ Tech ARP
- Anonabox Pro TOR VPN Router Review @ OCC
Subject: Cases and Cooling | September 6, 2016 - 09:28 PM | Tim Verry
Tagged: antec, mini ITX, SFF, water cooling, razer, PAX
At PAX West, Antec, in a partnership with Razer, showed off a new small form factor case for Mini ITX systems called the Antec Cube – Designed By Razer. The new case is an angular forward leaning design with an all-black finish complemented by green LEDs and darkened acrylic windows on the sides and top. It sports a green power button, green triple snake Razer logo, front IO on the top edge of the front panel with green USB 3.0 ports, and green LED under-glow strips on the left and right bottom sides. Needless to say, this is the case for fans of the color green (heh).
Internally, the Antec Cube – Designed By Razer (Why must this have such a long name?) can accommodate Mini ITX motherboards, ATX power supplies, three expansion slots, one 3.5” hard drive, and up to four 2.5” drives. It has decent component support with room for GPUs up to 350mm (~13.77”) with front intake fans removed and CPU coolers up to 190mm (~7.48”) tall. The motherboard is installed upside down so GPUs will be closest to the top of the case. The power supply is hidden in the bottom of the case by a shroud that allows you to hide your rats nest of cables (heh) as well.
As for cooling, the small form factor case has support for up to a 140mm rear exhaust fan and two 120mm intake fans in the front (or a 240mm water cooling radiator).
I think that this case would be a good fit for a custom water cooling loop as an air cooled GPU may have a hard time being up top with little ventilation, especially if it is not of the blower style design and is dumping heat out into the top of the case. Also, it would look cooler (heh). Actually, Antec showed off a water cooled system using the case at PAX West which you can see in this video thanks to Steve Burke over at Gamer’s Nexus who was at the show. It does have some nice features including a removable PSU dust filter and a new click system for the side panels that reportedly make them easy to remove and install.
The case will be sold individually as well as in pre-built systems in the US while in China it will be sold exclusively with pre-built PCs from OEMs. Production is slated to begin next month with availability by the end of the year. There is no word yet on pricing, unfortunately.
What do you think about the new SFF case? And those green LEDs?
Subject: General Tech | September 6, 2016 - 05:58 PM | Scott Michaud
Tagged: nvidia, epic games, valve, htc, vr funhouse, vive
So Epic Games, NVIDIA, and HTC (with Valve) are hosting a game jam aboard the MS Bleichen ship in Hamburg, Germany. The purpose is to develop mods for VR Funhouse. Nothing says a fun VR experience like room-scale experiences on a boat. Hopefully it will be firmly docked to prevent judges from getting sea-sick... or not. Maybe that will make the carnival games even better?
The jam takes place between September 24th and September 26th. Epic, NVIDIA, and Valve will be donating prizes to the event. Tickets cost 16.67 Euros, although I'm guessing that doesn't include food or a place to sleep -- they don't say one way or the other. The general public can also buy tickets for the last day, to experience the creations.
Subject: Graphics Cards | September 6, 2016 - 05:45 PM | Scott Michaud
Tagged: nvidia, pascal, gtx 1050, geforce
I don't know why people insist on encoding screenshots from form-based windows in JPEG. You have very little color variation outside of text, which is typically thin and high-contrast from its surroundings. JPEG's Fourier Transform will cause rippling artifacts in the background, which should be solid color, and will almost definitely have a larger file size. Please, everyone, at least check to see how big a PNG will be before encoding it as JPEG. (In case you notice that I encoded it in JPEG too, that's because re-compressing JPEG artifacts makes PNG's file-size blow up, forcing me to actually need to use JPEG.)
It also makes it a bit more difficult to tell whether a screenshot has been manipulated, because the hitches make everything look suspect. Regardless, BenchLife claims to have a leaked GPU-Z result for the GeForce GTX 1050. They claim that it will be using the GP107 die at 75W, although the screenshot claims neither of these. If true, this means that it will not be a further cut-down version of GP106, as seen in the two GTX 1060 parts, which would explain a little bit why they wanted both of them to remain in the 1060 level of branding. (Although why they didn't call the 6GB version the 1060 Ti is beyond me.)
What the screenshot does suggest, though, is that it will have 4GB of GDDR5 memory, on a 128-bit bus. It will have 768 shaders, the same as the GTX 950, although clocked about 15% higher (boost vs boost) and 15W lower, bringing it back into the range of PCIe bus power (75W). That doesn't mean that it will not have a six-pin external power connector, but that could be the case, like the 750 Ti.
This would give it about 2.1 TeraFLOPs of performance, which is on part with the GeForce GTX 660 from a few generations ago, as well as the RX 460, which is also 75W TDP.
Subject: Cases and Cooling | September 6, 2016 - 05:44 PM | Jeremy Hellstrom
Tagged: corsair, Corsair H5 SF, AIO, water cooler, SFF
You can't judge a system by it's cover anymore, tiny systems that would appear to be an HTPC could in fact be a higher end gaming system thanks to the number of SFF enthusiast class boards released over the past year. Indeed one of the biggest hurdles system builders face is fitting appropriate cooling into the small cases. Corsair released their H5 SF all in one watercooler at the beginning of the year and we have seen several reviews of the uniquely shaped cooler. The H5 SF will cool your CPU but it does come with a noise penalty thanks to the fan. If you haven't seen this cooler before, or are just in need of a refresher you can pop by Techgage as they have just completed a review of this cooler.
"Cooling options for those building or upgrading an itty bitty mini-ITX system are few and far between, and even less so if liquid cooling is a must. Fear not small form factor lovers, Corsair is here to save the day with the H5 SF, the mightiest of all mini all-in-one liquid cool ers, so read on to see if it can keep up with today’s pint sized powerhouses."
Here are some more Cases & Cooling reviews from around the web:
- Swiftech H240 X2 CPU Liquid Cooling System @ NikKTech
- Thermaltake Core G3 Case @ Kitguru
- SilverStone PM01 Gaming @ Modders-Inc
- Corsair Carbide Air 740 Cube Chassis @ Guru of 3D
Subject: Processors | September 6, 2016 - 03:05 PM | Ryan Shrout
Tagged: Zen, single thread, geekbench, amd
Over the holiday weekend a leaked Geekbench benchmark result on an engineering sample AMD Zen processor got tech nerds talking. Other than the showcase that AMD presented a couple weeks back using the Blender render engine, the only information we have on performance claims come from AMD touting a "40% IPC increase" over the latest Bulldozer derivative.
The results from Geekbench show performance from a two physical processor system and a total of 64 cores running at 1.44 GHz. Obviously that clock speed is exceptionally low; AMD demoed Summit Ridge running at 3.0 GHz in the showcase mentioned above. But this does give us an interesting data point with which to do some performance extrapolation. If we assume perfect clock speed scaling, we can guess at performance levels that AMD Zen might see at various clocks.
I needed a quick comparison point and found this Geekbench result from a Xeon E7-8857 v2 running at 3.6 GHz. That is an Ivy Bridge based architecture and though the system has 48 cores, we are only going to a look at single threaded results to focus on the IPC story.
Obviously there are a ton of caveats with looking at data like this. It's possible that AMD Zen platform was running in a very sub-optimal condition. It's possible that the BIOS and motherboard weren't fully cache aware (though I would hope that wouldn't be the case this late in the game). It's possible that the Linux OS was somehow holding back performance of the Zen architecture and needs update. There are many reasons why you shouldn't consider this data a final decision yet; but that doesn't make it any less interesting to see.
In the two graphs below I divide the collection of single threaded results from Geekbench into two halves and there are three data points for each benchmark. The blue line represents the Xeon Ivy Bridge processor running at 3.6 GHz. The light green line shows the results from the AMD Zen processor running at 1.44 GHz as reported by Geekbench. The dark green line shows an extrapolated AMD Zen performance result with perfect scaling by frequency.
Subject: Storage | September 6, 2016 - 02:29 PM | Jeremy Hellstrom
Tagged: crucial, MX300, 1050GB, sata ssd, M.2, 88SS1074, tlc
The MX300 series utilizes Micron 384G-bit, 32 tier floating gate, 3D TLC NAND which means that the capacities are a little different than we are used to. 1050GB is an odd number, the 978GB available after formatting even more so, but in the end the actual number matters less than the performance. The SSD Review tested this drive which uses a four channel Micron 88SS1074 controller and sports eight NAND packages with Micron LPDDR3 1333MHz DRAM for a cache. They tested a single drive as well as setting up two in RAID 0, the single drive could hit 535MB/s read and 516MB/s write and RAID 0 did indeed come close to doubling that. Drop by to see their full results.
"Due to the new 384G-bit TLC 3D NAND, the MX300 line up is now offered in 275GB, 525GB, 750GB, 1050GB, and 2TB options. From this announcement, the 2TB option intrigued us the most, however, they are still unavailable, so we opted to get two 1050GB models for today's review."
Here are some more Storage reviews from around the web:
- Toshiba HK4E Enterprise @ The SSD Review
- Transcend ESD400 Portable USB3 SSD @ Benchmark Reviews
- Seagate IronWolf 10TB HDD @ Kitguru
- ASUSTOR AS6208T NAS Server @ NikKTech
- QNAP TVS-682T 6-Bay Thunderbolt NAS @ techPowerUp
Subject: General Tech | September 6, 2016 - 01:07 PM | Jeremy Hellstrom
Tagged: hdmi, usb type-c, HDMI 1.4b
HDMI Licensing have agreed to allow a single cord converter that converts HDMI 1.4b to USB Type-C, no additional dongle required. The HDMI Alt Mode will support all the features of the new HDMI standard, including 4k resolution and an audio return channel. That will mean any computer, tablet or other device with Type-C out can be plugged into an HDMI port on an external display with a single cord, no additional dongles or other hassles. The Register does point out one small defect, the HDMI port is not reversible so you will still have to turn it three times before it will plug in.
"HDMI Licensing, the administrator of the High-Definition Multimedia Interface (HDMI) spec, has decided that the time has come to do away with dongles and given the thumb's up to USB-C."
Here is some more Tech News from around the web:
- Adobe Flash goes crawling back to Linux for some security @ The Inquirer
- The New AMD Socket AM4 Chipsets Revealed @ Tech ARP
- The 7th Generation AMD A-Series Desktop APUs @ Tech ARP
- The survivors: Intel's Apollo Lake netbook CPUs stagger from Goldmont bloodbath @ The Register
- A Review Of The Zmodo Pivot Smart Camera Security Solution @ Techgage
- Netflix Finds x265 20% More Efficient Than VP9 @ Slashdot
- What To Expect from Google Home @ Hardware Secrets
Introduction and Specifications
The Phanteks Enthoo Primo is a massive full-tower case with a monolithic appearance, and a ton of cooling support. It's tall, heavy, and certainly looks every bit the premium enclosure the price tag indicates. So how did it perform? Read on to find out!
We've reviewed other cases in the Enthoo series from Phanteks, and these have been a solid choice in their respective price ranges. The cases we've looked at offer excellent construction, nice appearance, and excellent component support. The Enthoo Primo sits at the top of the lineup, and it looks it; a nearly 26-inch tall case that is nearly as deep, it's so large it even has a second ATX power supply mount (a dual PSU adapter is offered as a separate purchase).
So what market does this Enthoo Primo case serve? It could house any sort of enthusiast or high-end workstation/server setup, supporting EATX and even SSI EEB motherboard form-factors. There's a ridiculous amount of liquid cooling potential, though given its size the average all-in-one cooler will need to stay close to the processor given the length of typical AIO cooler hoses. This thing is begging for a custom watercooling loop (sorry, I didn't oblige in this review).
The Enthoo Primo is fitted with an aluminum faceplate